User manual

12
Setting Up the DivX
Setting Up the DivX
1. With the unit in Stop mode, press the MENU button.
2. Press the √/® buttons to select DivX Page, then press the † or ENTER button.
3. Press the π/† buttons to select the desired item, then press the ® or ENTER button.
Note :
•PressOkwillmaketheregistrationcodewindowdisappear.
•DivXcanonlybeaccessedatstopmode.
reference
Specifications
Problem Action
The screen is
blocked
•Pressthe ■ / button (in front panel) for more than 5 seconds under no
disc inside. All settings will revert to the factory settings.
Forgot password.
Press the • ■ / button (on the panel) for more than 5 seconds under no
disc inside. All setings including the password will revert to the factory
settings. Don’t use this unless absolutely necessary.
Troubleshooting
Before requesting service (troubleshooting), please check the following.
General
Power Requirements
AC 110-240 V ~ 50/60 Hz
Weight
DVD-C350,C350K,C360 : 1.2 Kg
DVD-C450,C450K : 1.5 Kg
Power Comsumption
6W
Dimensions
DVD-C350,C350K,C360 :
360mm (W) X 207mm(D) X 42mm (H)
DVD-C450,C450K :
430mm (W) X 207mm(D) X 42mm (H)
Operating Temperature
Range
+5°Cto+35°C
Operating Humidity Range
10 % to 75 %
Video
Output
Component Video
Y : 1.0 Vp-p (75 Ω load)
Pr : 0.70 Vp-p (75 Ω load)
Pb : 0.70 Vp-p (75 Ω load)
Audio
Output
Frequency Response
20Hz ~ 20kHz