Specifications

RACK DRY (OPTIONAL PART)
Installing the drying rack
1. Open the Dryer door.
2. Position the drying rack in the tumbler, placing the front lip of the drying rack on the top of
the lint filter.
3. Place the rear legs in the two recessed areas of the dryer's back wall, then push down the
middle of the drying rack to fix.
4. Place the items to be dried on the rack, leaving space between them so air can circulate.
5. Close the Dryer door.
6. Use the Time Dry cycle. Select the time according to the moisture and weight of the items.
Start the Dryer. It may be necessary to reset the timer if a longer drying time is needed.
Washable sweaters Low or Extra Low
(block to shape and lay flat on rack)
Stuffed toys Low or Extra Low
(cotton or polyester fiberfilled)
Stuffed toys Air Fluff
(foam or rubber-filled)
Foam rubber pillows Air Fluff
Sneakers Air Fluff or Heat (Extra Low)
Z/_ Drying foam rubber, plastic, or rubber on a heat setting cause damage to the item and
may
....... lead to a fire hazard.
_ rying Rack is not supplied in this model. The Drying Rack is optional. You can purchase it
through a service center.
operatng hstructons, tips 23
DV220AE-02810A EN.indd 23 2010-01-28 _;.&t_._3:53:32