DSR 9500A_GB_10.10 10/12/02 9:14 AM Page II DSR 9500A FTA, CI, EM VIA, VIA CI Instructions for use “REV 1.
DSR 9500A_GB_10.10 10/12/02 9:14 AM Page IV This STB has been manufactured to satisfy international safety standards. Please read the following recommended safety precautions carefully. AC 100-240V ~, 50/60Hz OVERLOADING: Do not overload wall outlets, extension cords or adapters as this can result in fire or electrical shock. LIQUIDS: Keep liquids away from the STB. CLEANING: Before cleaning, disconnect the STB from the wall socket.
DSR 9500A_GB_10.10 10/12/02 9:14 AM Page 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DSR 9500A_GB_10.10 10/12/02 9:14 AM Page 4 1. LOCATION OF THE RECEIVER 7. INSERTING SMARTCARDS FOR VIACCESS SERVICES Your DSR 9500A should be placed under proper ventilation. Don’t put in completely enclosed cabinet that will restrict the flow of air, resulting in overheating. The location should be safeguarded from direct sunlight, excess moisture, rough handling or household pets. Avoid stacking other electronic components on the top of the receiver.
DSR 9500A_GB_10.10 10/12/02 9:14 AM Page 6 DSR 9500A FTA, CI, EM VIA, VIA CI DSR 9500A FTA, CI, EM VIA, VIA CI DESCRIPTION DESCRIPTION Rear Panel Front Panel POWER DISH INPUT 13/18V 500mA max. DEO OUT AV2 (EXT) Pmax 40W AC 100-240V ~, 50/60Hz Fuse:250V T2A ANT.IN DIGITAL AUDIO OUT OPTICAL AV2 (TV) 1. 3 4 5 6 7 , These keys are used to change the channels. 3. , These keys are used to increase and decrease the volume level manually. 4.
DSR 9500A_GB_10.10 10/12/02 9:15 AM Page 8 DESCRIPTION This key is used to toggle between normal & muted audio. 6. FAV Use the key to switch between favorite lists. 7. EPG Electronic Program Guide button displays the TV/Radio Program guide. POWER 4 8. LAST This key is used to call up directly whatever channel you were watching list. 5 9. TEXT(GREEN) ( ) This key is used to select the subtitle mode. This button functions same as the GREEN button on the menu. Press once and subtitle appears.
DSR 9500A_GB_10.10 10/12/02 9:15 AM Page 10 1. Display Screen 3. Select Soundtrack Before you can view the television program, you must perform the installation. Therefore you will see only menu images at first. After the television channels have been programmed, you will see the following picture(banner) each time you switch channels: ● Left Audio Status Parental Lock Channel Number Channel Name ● Right Audio Status CAS Name 4.
DSR 9500A_GB_10.10 10/12/02 9:15 AM Page 12 6. Program Information 5.1 Service Favorites ● ● ● Press the Green ( the Favorites list. Use the / , that you want. Press the Green ( list. EPG-Electronic Program Guide The electronic program guide gives you a channel list for the channels. ) key on the control unit to select / keys to select a favorite group Note : 1. This service depends on service provider. 2.
DSR 9500A_GB_10.10 10/12/02 9:15 AM Page 14 OPERATING THE RECEIVER 8. Teletext OSD Main Menu When the current broadcasting program provides Teletext OSD, press the Green ( ) key twice to see the current Teletext OSD list. After installing your antenna system and DSR 9500A with appropriate connectors. ● ● To change the Teletext OSD: ● ● Use the / keys to select a Teletext OSD you want. Press the key and then the Teletext OSD you want is displayed on the screen.
DSR 9500A_GB_10.10 10/12/02 9:15 AM Page 16 OPERATING THE RECEIVER 1.1 LNB Setting ● You can select the satellite and LNB setting conditions to execute channel search and you can alter the settings for 22kHz tone. The parameters set in this menu are needed for programming the channels for the "Auto scanning" and "Manual scanning". The necessary information can be found at your antenna and LNB brochures, or you can ask your dealer.
DSR 9500A_GB_10.10 10/12/02 9:15 AM Page 18 OPERATING THE RECEIVER 1.2.2 Installer Mode 1.4 Auto Scanning After checking the positioner’s state, installer should use this menu. He should set the “Disable Limits” before using User mode. The sub menu “Auto Scanning” will enable download the channels automatically from the preprogrammed satellites. ● ● ● ● To download channels automatically: You can select All/Off/Only Free option mode in each satellite.
DSR 9500A_GB_10.10 10/12/02 9:15 AM Page 20 ● ● ● ● ● 2. Channel Organising Select the FEC(Forward Error Correction)of the transponder you want to find. You can select the value of 1/2, 2/3, 3/4, 5/6, 7/8 or Auto. Select the polarization of the transponder you want to find. (Horizontal/Vertical/Circular Left/Circular Right) In the case of horizontal, 18V and in the case of vertical, 13V are output through LNB line. Select Scan Mode “All” or “Only Free”. Select Network Search “Yes”.
DSR 9500A_GB_10.10 10/12/02 9:15 AM Page 22 OPERATING THE RECEIVER 2.3 Delete Channel ● ● 2.7 Move & Edit Channel Select the desired channel you want to delete by pressing Red ( ) key. Press key for confirmation. ● ● ● ● 2.4 Delete All Channel ● At the request window, press key to delete all channels and press MENU / EXIT to exit. ● ● 2.5 Delete Scrambled Channels To edit channel name, press Green ( ) key. Font Table will be displayed.
DSR 9500A_GB_10.10 10/12/02 9:15 AM Page 24 OPERATING THE RECEIVER 3. Parental Lock 3.2. Change PIN Code This "Parental Lock" feature sets viewing restrictions and prevents unauthorized access to your DSR 9500A through the PIN (Personal Identification Number), which is a 4 digit number. (The factory preset PIN code : 0000) To change the PIN code, select the second option "Change PIN Code".
DSR 9500A_GB_10.10 10/12/02 9:15 AM Page 26 OPERATING THE RECEIVER 4. System Setup 4.3 Media Settings This option enables you to change the factory preset system settings as per your requirements. You can set the various media settings you want. Place the cursor on this sub menu and press . ● ● ● ● The "Language Selection"option allows the user to select the desired language of the OSD, Soundtrack, Teletext, Subtitle or EPG. ● ● ● ● GB 4.1 Language Selection Select the TV system : PAL, SECAM.
DSR 9500A_GB_10.10 10/12/02 9:15 AM Page 28 OPERATING THE RECEIVER 4.6 System Information 5. Common Interface (Only for DSR 9500A VIA CI, DSR 9500A CI) If you have to contact your service provider or a service center they might ask for information available from this menu. Place the cursor on this sub menu and press key. The following will be the on-screen display. This STB is equipped with two PCMCIA slots, which enable the use of two CI-CAMS.
DSR 9500A_GB_10.
DSR 9500A_GB_10.10 10/12/02 9:15 AM Page 32 Video decoder System decoding: Profile and level: Data rate: Video formats: Picture resolution: Audio Decoder System decoding: Audio mode: Sampling frequency: RF modulator Modulator output: Video type: UHF output level: Output connector: Ant. O/P connector: Tuning method: MPEG 2 ISO/TEC 13818 (transport stream) MPEG 2 MP@ML (4:2:2) 1~ 15 Mb/s 4:3 (normal) & 16:9 (widescreen) 720(H) x 576(V) x 50 fields/sec RS232C, Max. 115.