User guide

• Your microphone and speaker are turned on and you can speak hands-

free. For privacy, use the handset.

• To finish the call, replace the handset or press the ANS/RLS or SPEAK-

ER key.

BUSY STATION CALLBACK

When you call another station and receive a busy signal:

• Press the CBK key or dial 44.

• When the busy station becomes free, your keyset will ring.

• Lift the handset or press ANS/RLS or SPEAKER to call the now idle sta-

tion.

NOTES:

1. A callback will be cancelled if not answered within 30 seconds. If you

have set a callback, your CBK key will light.

2. If the Hot Keypad feature has been turned off, you must first lift the hand-

set or press the SPEAKER key before dialling.

BUSY STATION CAMP-ON

When you call another station and receive a busy signal but you do not want

to wait for a callback:

• Press the CAMP key or dial 45.

• The called station will receive off-hook ring tone repeated every few sec-

onds and its first available CALL button will flash green to indicate your

call is waiting.

• Wait for the called party to answer.

• The called station must release its first call or place it on hold before an-

swering your camp-on.

NOTES:

1. If you receive No More Calls tone, that station has no available key to ac-

cept your call. Hang up or leave a message.

2. If the Hot Keypad feature has been turned off, you must first lift the hand-

set or press the SPEAKER key before you begin dialling.

CALLING YOUR SYSTEM OPERATOR

• Dial 9 to call your system operator or group of operators.

• If you want to call a specific operator, dial that person’s extension num-

ber.

NOTE: If the Hot Keypad feature has been turned off, you must first lift the

handset or press the SPEAKER key before you begin dialling.