Product specifications

4-11
CUSTOMER SET RELOCATION
Customer Set Relocation allows the customer to exchange or swap similar stations in the iDCS 100
without wiring changes. All individual station assignments such as trunk ring, station group, station
COS, station speed dial, button appearances, call forwarding, etc. will follow the Customer Set
Relocation program.
DATA SECURITY
Single line extensions used with modems and facsimile machines can be programmed so that they will
not receive any system-generated tones that would disrupt data transmissions. In addition, these
devices receive DCS C.O. ringing pattern instead of intercom ring pattern. Devices connected to an
SLI card receive a disconnect signal upon termination.
DATABASE PRINTOUT
A copy of the customer database can be obtained by using PCMMC. This information can be directed
to a printer or the PC screen and may be done either on-site or remotely. A complete database or
specific data blocks may be obtained.
DECT Service
The iDCS 100 system provides DECT cordless communications in a single office or throughout a large
commercial or industrial complex. To implement this service, you need BSI card, DBS card and DECT
handsets. Users of this service meet improved overall efficiency, since staff can be reached or make
calls wherever they are.
DIALED NUMBER IDENTIFICATION SERVICE (DNIS)
When DNIS service is provided on an incoming trunk the iDCS 100 can route calls based on the
numbers received.
DIRECT IN LINES
Outside lines may be programmed to bypass the operator(s) and ring directly at any station or group
of stations.