DVD-VCR Instruction Manual

26
GB
Selecting the Colour Mode
Before recording or playing back a cassette, you can select the
required system standard.
➢ ◆ When you playback an NTSC-recorded tape on this DVD-
VCR make a setting on the colour system according to your
TV. If your TV is a PAL system only TV, set NTPB.
If your TV is Multi System TV (NTSC 4.43 compatible), set
NT4.43 and you can record NT4.43.
1 After pressing the MENU, press the OK or  .
Result: The Setup menu is displayed.
2 Press the corresponding  ,  buttons to select the
User Set option.
3 Press the OK or  to select this option.
Result
: The User Set menu is displayed.
4 Press the corresponding  or  buttons, until the Colour
System option is selected.
5 Press the OK or  button to select Auto ➝ PAL ➝ MESECAM
➝
B/W
.
B/W Black and White
6 On completion, press RETURN three time to exit the menu.
DVD-V80/ DVD-V85
DVD-70
Colour System : Auto
IPC : On
G-Code Extend : Off
User Set
Colour System : Auto
NICAM : On
IPC : On
G-Code Extend : Off
User Set
Colour System : Auto
IPC : On
User Set
Colour System : Auto
NICAM : On
IPC : On
User Set
Australia Model
Newzealand Model
Australia Model
Newzealand Model
Auto
PAL
MESECAM
B/W
Auto
PAL
MESECAM
B/W
VCR
00169N DVD-V70/XSA-GB2 11/14/05 10:11 AM Page 26