Thank you for buying a Samsung Camera. This manual will guide you through using the Digimax U-CA 3, including taking images, downloading images and using the MGI PhotoSuite III SE software. Please read this manual before using your new camera.
Instructions Use this camera in the following order Set up the camera driver Before connecting the camera to a PC, via the USB cable, you will need to set up the camera driver. Install the camera driver that is contained in the Application S/W CD-ROM.(p.95) Take a picture (p.21) Take a picture Insert the USB cable Check the camera’s power Check [Removable Disk] Insert the supplied USB cable into the PC’s USB port and the camera’s USB connection terminal.(p.
Contents POWER button READY ? ? ? ? ? ?? ?? ?? ?? ?? ? ? ? ? ? ?? ?? ?? ?? ?? ? ? ? ? ? ?? ?? ?? ?? ?? ? ? ? ? ? ?? ?? ?? ?? ?? ? ? ? ? ? ? ? ? ? ? ?? ?? ?? ?? ?? ? ? ? ? ? ?? ?? ?? ?? ?? ? ? ? ? ? ?'@@f@@e?'@@e? ?V4@f@@e?V4@e? ?'@@f@@e?'@@e? ?V4@f@@e?V4@e? ?'@@f@@e?'@@e? ?V4@f@@e?V4@e? ?'@@f@@e?'@@e? ?V4@f@@e?V4@e? ?'@@f@@e?'@@e? ?V4@f@@e?V4@e? ? ? ? ? ? ?? ?? ?? ?? ?? ? ? ? ? ? ?? ?? ?? ?? ?? ? ? ? ? ? ?? ?? ?? ?? ?? ? ? ? ? ? ?? ?? ?? ?? ?? About the icons Warning Caution ? ? ? ? ? ? ? ?? ?? ?? ?? ??
Contents LEFT/RIGHT/MENU/OK button LCD button ? ? ? ? ? ?? ?? ?? ?? ?? ? ? ? ? ? ?? ?? ?? ?? ?? ? ? ? ? ? ?? ?? ?? ?? ?? ? ? ? ? ? ?? ?? ?? ?? ?? ? ? ? ? ? ? ? ? ? ? ?? ?? ?? ?? ?? ? ? ? ? ? ?? ?? ?? ?? ?? ? ? ? ? ? ?'@@f@@e?'@@e? ?V4@f@@e?V4@e? ?'@@f@@e?'@@e? ?V4@f@@e?V4@e? ?'@@f@@e?'@@e? ?V4@f@@e?V4@e? ?'@@f@@e?'@@e? ?V4@f@@e?V4@e? ?'@@f@@e?'@@e? ?V4@f@@e?V4@e? ? ? ? ? ? ?? ?? ?? ?? ?? ? ? ? ? ? ?? ?? ?? ?? ?? ? ? ? ? ? ?? ?? ?? ?? ?? ? ? ? ? ? ?? ?? ?? ?? ?? 48 ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ?? ?? ??
Getting to know your camera Thank you for buying a Samsung Digital Camera. Prior to using this camera, please read the user manual thoroughly. When you require After Sales service, please bring the camera and the cause of the camera malfunction (such as Batteries, Memory card etc.) to the A/S center. Please check that the camera is operating properly prior to when you intend to use it (e.g. for a trip or an important event) to avoid disappointment.
Danger Do not attempt to modify this camera in any way. This may result in fire, injury, electric shock or severe damage to you or your camera. Internal inspection, maintenance and repairs should be carried out by your dealer or Samsung Camera Service Center. Please do not use this product in close proximity to flammable or explosive gases, as this could increase the risk of explosion. Should any form of liquid or a foreign object enter the camera, do not use it.
Caution Leaking, overheating, or burst batteries could result in fire or injury. Use batteries with the correct specification for the camera. Do not short circuit, heat or dispose of batteries in fire. Do not insert the batteries with the reverse polarities. Remove the batteries when not planning to use the camera for a long period of time. Batteries may leak corrosive electrolyte and irreparably damage the camera's components. Do not fire the flash while it is in contact with hands or objects.
This digital camera can be used for Viewing images on a TV. (refer to page 70) Printing images using a dedicated printer, DPOF and PictBridge compatible printer or a DPOF-equipped photo lab. (refer to page 55~62) Taking a picture. (refer to page 20~41) Down loading image files from camera to computer. (refer to page 84) Editing images on a PC.
This digital camera can be used for Creation of a digital photo album. Recording your voice. (refer to page 22) You can even create your own unique gift wrap paper by using your digital images. Taking a self-portrait and using the image to personalize name cards. Recording a movie clip (refer to page 21) Inserting images directly into any electronic document.
Manufacturer's contents Please check that you have the correct contents before using this product. marked contents are optional. Digital Camera User manual Duracell CP-1 battery Pouch Product warranty AV cable USB cable Software CD DigiStudio Memory Stick Duo/ Case/Adapter Battery pack (SBP-3603) Camera strap AC adapter (3.
Identification of features Front & Top Mode switch Power button Shutter button Viewfinder Speaker Flash Auto Focus lamp Function lamp Microphone Strap eyelet Lens Back & Bottom Camera status lamp Viewfinder TELE/Digital zoom button WIDE/THUMBNAIL button PLAY mode button +&-/ DELETE button LCD monitor USB/ AV connection terminal DC input connection point LCD button Tripod socket * When using the digital zoom to take a picture, the composition of the picture may be different depending on whether y
Identification of features Side/ 5-function button Battery chamber cover Voice memo/ UP button Battery chamber SELF-TIMER/ RIGHT button FLASH/ LEFT button Memory card slot Battery holder MENU/ OK button MACRO/PLAY&PAUSE/ DOWN button Mode switch You can select the desired working mode by using the mode switch located on the top of the camera. This digital camera has 3 recording modes. These are listed below.
Identification of features Still image mode You can select from Auto, Manual, or Night mode. In Myset mode, any changes made to settings other than Self-Timer and Voice Recording will be maintained even after the camera is turned off.
Connecting to a Power Source INFORMATION Important information about battery usage Do not recharge the non rechargeable batteries. This may cause an explosion. Please remove the batteries if the camera will not be used for long periods. Batteries can lose power over time and are prone to leaking if kept inside the camera. Low temperatures (below 0 ) can affect the performance of the batteries and you may experience reduced battery life. Batteries will usually recover at normal temperatures.
Connecting to a Power Source : If the camera does not turn on after you have inserted batteries, please check whether the batteries are inserted with the polarity(+ and-). Using the batteries 1. Open the battery chamber cover by pushing in the direction of the arrow. 2. Insert the batteries according to the polarity marks (+ and -) on the back of the battery chamber cover. 3. To close the battery chamber cover, push it until it clicks. Removing the battery 1. Turn off the camera power.
Precautions on Using the Memory Stick Duo This camera operates only with a Memory Stick Duo. Some models of Memory Stick Duo media do not have the write-protect switch (B). Card pins(A) Write protect switch(B) Label(C) Back Front Do not touch the card pins (part A) with your fingers or with metal objects. Do not press hard when writing on the label (part C). If you insert the Memory Stick Duo into the Memory Stick Duo adapter, you will be able to use it with a Memory Stickcompatible device.
Precautions on Using the Memory Stick Duo Maintenance of the Memory Stick Duo (Hereafter the Memory Stick Duo is referred to as the "Memory Card".) Be sure to format the memory card (see p. 66) if you are using a newly purchased memory for the first time, if it contains data that the camera cannot recognize, or if it contains images captured with a different camera. Turn off the camera power whenever the memory card is being inserted or removed.
Inserting the memory card 1. Turn off the camera’s power and pull the memory card cover in the direction of the arrow to open. 2. Have the front of the memory card facing toward the front of the camera (lens) and the card pins toward the back of the camera (LCD monitor), and then push the memory card into the card slot until you hear a click. 3. To close, push the card cover until you hear a click. If the memory card does not slide in smoothly, do not attempt to insert it by force.
When Using the Camera for the First Time If the camera is turned on for the first time, a menu will be displayed to set date, time and language in the LCD monitor. This menu will not be displayed after setting up the date, time and language. Set up the date, time and language before using this camera. Setting up the date, time and date type 1. Select the [DATE.TIME] menu by pressing the UP/DOWN button and press the RIGHT button. 2.
LCD monitor indicator The LCD monitor displays information about the shooting functions and selections. [ Image & Full Status ] No. Description 1 Battery p.15 2 Recording mode p.12~13 3 Camera shake warning p.23 4 Flash p.29 5 Self-timer p.30 6 Voice memo p.26 7 Macro p.27 8 Metering p.40 9 Auto focus frame 10 Time 01:00 PM p.19, 67 11 Date 2003/01/01 p.19, 67 12 Exposure compensation p.31 13 White Balance p.
LCD monitor indicator 14 ISO p.33 15 Sharpness p.41 16 Image quality p.39 17 Image size 2048, 2048P, 1600, 1024, 640 18 Number of available shots remaining 50 Remaining time( Movie clip/ Voice recording) 00:05:00 p.21 19 Digital Zoom rate X3.0 p.25 20 Optical zoom p.38 Starting the recording mode Recording a Movie clip 1. Insert the batteries (p.15). Insert the batteries taking note of the polarity (+ / -). 2. Insert the memory card (p.18). 3. Close the memory card cover. 4.
Starting recording mode Recording Voice Steps from 1-4 are the same as those for recording a movie clip. 5. Select the VOICE RECORDING( ) mode by sliding the mode switch. 6. Press the shutter button to record a voice. - Press the shutter button once and voice is recorded for as long as the available recording time(Max : 1 hour) allows. The recording time will be displayed on the LCD monitor. - Voice will still be recorded if the shutter button is released.
Things to watch out for when taking pictures INFORMATION If the camera is in focus, when you press the SHUTTER button halfway, the camera status lamp (green) will light up and the LCD monitor's autofocus mark will turn green. If the camera is out of focus, when you press the SHUTTER button halfway, the camera status lamp (green) will blink and the LCD monitor's autofocus mark will turn red. Should this be the case, the camera is unable to capture an image clearly.
Using the camera buttons to adjust the camera The RECORDING(STILL IMAGE, VOICE RECORDING, MOVIE CLIP) mode function can be set up by using the camera buttons. POWER button Used for turning the camera’s power on / off. If there is no operation during the specified time, the camera’s power will be turned off automatically to save battery life. Pressing the power button for over 3 seconds will deactivate the buzzer sound function.
WIDE / TELE button TELE Zoom Optical zoom TELE Digital zoom TELE : Pressing the zoom button T. This will zoom into the subject i.e. the subject will appear nearer. : When the maximum (3X) optical zoom is selected, pressing the zoom button T activates the digital zoom software. Releasing zoom button T stops the digital zooming at the required setting. Once the maximum digital zoom (3X) is achieved, pressing the zoom button T will have no effect. You can check the digital zoom rate with the [X1.5 ~ X 3.
WIDE / TELE button INFORMATION To use the digital zoom the LCD monitor has to be turned on. Images taken using the digital zoom may take a little longer for the camera to process. Allow time for this to take place. The digital zoom cannot be used in movie clip shots. Digital Zoom will not work in Night Scene mode. You may notice a decrease in image quality when using the digital zoom. When the maximum(3X) optical zoom is selected, pressing the zoom button T increases the digital zoom ratio by 0.5 steps.
Voice memo( )/ UP button 3. Press the shutter button and take a picture. The picture is stored on the memory card. 4. Voice memo will be recorded for ten seconds from the moment the picture is stored. In the middle of the sound recording, pressing the shutter button will stop the voice memo. INFORMATION A distance of 40cm between you and the camera (microphone) is the best distance to record sound.
Focus lock To focus on the subject positioned outside of the center, use the focus lock function. Using the Focus Lock 1. Ensure the subject in the center of the autofocus frame. 2. Press the SHUTTER button halfway. The camera status lamp (green) will light up, indicating that the camera is in focus. Be careful not to press the SHUTTER button all the way down to avoid taking an unwanted picture. 3.
FLASH( ) / LEFT button Flash mode indicator ICON Flash mode Description Auto flash If the subject or background is dark, the camera flash will operate automatically. Red eye reduction If a subject or background is dark, the camera flash will work automatically and will reduce the red-eye effect by using the redeye reduction function. Fill in flash The flash fires regardless of available light. The intensity of the flash will be controlled, according to the prevailing conditions.
Self-timer( ) / Right( ) button When the menu is displayed on the LCD monitor, pressing the Right button makes the cursor shift to the sub tab. When the menu is not displayed on the LCD monitor, the RIGHT button operates as the Selftimer( ) button. This function is used when the photographer would also like to be in the image. Selecting the self-timer 1. Slide the mode switch to the STILL IMAGE mode. 2. Press the SELF-TIMER( ) button until the desired mode indicator displays on the LCD monitor.
MENU/ OK button If the menu is displayed, use the 5-Function buttons ( / / / ) to change the data values and for your changes to be accepted. If the menu is not displayed, press the MENU/OK button to display a menu for the current camera mode on the LCD monitor. Press the button again to return to the previous state.
+/- button 2. Use the LEFT and RIGHT buttons to set the desired exposure compensation factor ( Ev). 3. Press the +/- button again. The value you set will be saved and the Exposure Compensation setup mode will close. If you change the exposure value, the exposure indicator ( ) will be displayed on the bottom of the LCD monitor. INFORMATION A negative exposure compensation value reduces the exposure.
+/- button Using the Custom White Balance White balance settings may vary slightly depending on the shooting environment. You can select the most appropriate white balance setting for a given shooting environment by setting up the custom white balance. 1. Select the CUSTOM ( ) menu of the White Balance. 2. Place a sheet of white paper in front of the camera so that the LCD monitor's auto focus frame ( ) shows only white, and then press the SHUTTER button. 3. Your custom white balance value will be stored.
+/- button Userset mode : This camera automatically adjusts the shutter speed and aperture values to the shooting environment. However, in Night Shot mode, you can set the shutter speed and aperture values to your preference. Select Night Shot mode, and then press the +/- button. The zoom function does not work while setting up the aperture value and shutter speed. 1) Selecting the Night Shot Mode 1. Slide the MODE switch to select Still Image mode ( ). 2. Press the MENU button. 3.
+/- button Aperture values that can be selected for each zoom position are as follows: Optical Zoom Zoom Position zoom0 zoom1 zoom2 zoom3 zoom4 zoom5 zoom6 zoom7 Focusing range(mm) 5.8 7.4 9.1 10.7 12.4 14.0 15.7 Large 2.8 3.1 3.4 3.7 4.0 4.3 4.6 4.8 Small 5.8 6.4 7.0 7.6 8.2 8.8 9.4 10.0 Aperture Value 17.4 Large (Press the UP button.) Aperture Value Small (Press the DOWN button.) Fast (Press the LEFT button.) Shutter Speed Slow (Press the RIGHT button.
Using the LCD monitor to adjust the camera settings You can use the menu on the LCD monitor to set up recording functions. In the STILL IMAGE/ MOVIE CLIP mode, pressing the MENU button displays the menu on the LCD monitor. INFORMATION The menu will not be displayed on the LCD monitor in the following circumstances: - When another button is being operated. - While image data is being processed. (when the green LED next to the viewfinder blinks) - When there is no battery capacity.
Using the LCD monitor to adjust the camera settings Menu tab Main menu Sub menu Camera working mode NORMAL B&W SUNSET EFFECT SEPIA RGB SOFT NORMAL SHARP VIVID How to use the menu 1. Turn on the camera and press the MENU button. A menu for each camera mode appears. However, there is no menu for Voice Recording mode. ( ) 2. Use the LEFT and RIGHT buttons to navigate through the menus. 2048 MODE AUTO Press the LEFT or RIGHT button. Press the LEFT or RIGHT button.
Mode You can select the desired Still Image mode. This is available in Auto, Manual, and Night modes. AUTO : Use this for shooting basic still images. MANUAL : Use this to store your custom settings for MODE the camera. Any changes made to settings other than Self-Timer and Voice MANUAL Recording will be saved. NIGHT AUTO AUTO NIGHT : Use this for shooting still images at night [ STILL IMAGE mode ] or in other dark conditions. Size You can select the image size appropriate for your application.
Quality You can select the compression ratio appropriate for your application of the captured images. The higher the compression ratio, the lower the picture quality. This is available in Auto, Manual, Night, and Movie clip modes Mode MOVIE CLIP mode STILL IMAGE mode Icon 320 160 Sub menu S.FINE FINE NORMAL HIGH LOW File Format jpeg jpeg jpeg mov mov QUALITY QUALITY S.
Metering If you cannot obtain suitable exposure conditions, you can change the metering method to take brighter pictures. This can be set in Auto and Manual modes. MULTI( ) SPOT( ) : Exposure will be calculated based on an average of the available light in the image area. However, the calculation METERING will be biased towards the centre of the MULTI image area. This is suitable for general use. SPOT : Only the rectangular area in the center of the LCD monitor will be metered for light.
Effect Setting RGB Values 1. Use the DOWN button to select [RGB] among the Effect submenus, and then press the OK button. A screen that looks like the one shown on the right will appear. 2. Use the UP and DOWN buttons to select the [OFF] or [ON] auxiliary menu, and then press the OK button. [OFF] : Select this if you do not want to change the RGB values. [ON] : Select this to open a window where you can adjust the RGB values. Use the UP and DOWN buttons to navigate the R, G, and B controls.
Starting play mode Turn the camera on and select Play mode by pressing the play mode button ( ). The camera can now play back the images stored in the memory. If you have turned on the camera by pressing the POWER button, you can press the PLAY button once to switch to Play mode and press it again to switch to Recording mode. If you have turned on the camera by pressing the PLAY button, you can press the PLAY button again to turn off the camera.
Starting play mode Playing back a movie clip Steps from 1-2 are the same as those to play back a still image. 3. Select the recorded movie clip that you want to play back by using the LEFT/RIGHT button. If you select a movie clip, the movie clip indicator ( ) will be displayed on the LCD monitor. 4. Press the play & pause button ( ) to play back a movie clip file. - To pause a movie clip file while playing it back, press the play & pause button again.
LCD monitor indicator The LCD monitor displays information about the shooting conditions. No. Description Icon Page 1 Battery 2 Play mode 3 File Type 4 Voice memo P.46 5 Protect indicator P.52 6 DPOF indicator P.56 7 Stored image number P.15 9 If you press the LCD button, you can check the following recording information: SIZE AV TV ISO FLASH DATE 44 : 2048X1536 : F2.8 : 1/60 : 100 : OFF : 03/09/01 SIZE AV TV ISO FLASH : 2048X1536 : F2.
Using the camera buttons to adjust the camera In Play mode, you can use the buttons on the camera to conveniently set up the Play mode functions. Thumbnail( ) / Enlargement( ) button You can view multiple pictures, enlarge a selected picture, and crop and save a selected area of an image. Thumbnail display 1. While an image is displayed full screen, press the thumbnail button. 2. The thumbnail display will highlight the image that had been showing at the time the thumbnail mode was selected. 3.
Thumbnail( ) / Enlargement( ) button The maximum enlargement rate in proportion to the image size. Image size 2048/2048P 1600/1024 640 Maximum enlargement rate X5 X3 X1.5 Trimming : You can extract part of the image that you want and save it separately. 1. Select an image that you want to enlarge and press the TRIMMING? TRIM:OK enlargement button. CANCEL: 2. Different parts of the image can be viewed by pressing the 5 function button. 3.
Voice( ) memo / Up button 3. Press the shutter button to start recording. The [REC] message will be displayed on the LCD monitor (as shown) and voice will be recorded to the still image for 10 seconds. 4. The recording can be stopped by pressing the shutter button again. STOP.SHUTTER REC 5. The ( ) icon will be displayed on the LCD monitor after voice memo recording has finished. - Voice memos can’t be recorded onto movie clip files.
LEFT / RIGHT/ MENU/ OK button LEFT / RIGHT/ MENU/ OK buttons activate the following. - LEFT button : While the menu is showing, press the LEFT button to select the menu tab to the left of the cursor. - RIGHT button : While the menu is showing, press the RIGHT button to select the menu tab to the right of the cursor, or to move an auxiliary menu. - MENU button : When you press the MENU button, the play mode menu will be displayed on the LCD monitor.
Delete( ) button This deletes images stored on the memory card. Deleting Images in Play Mode 1. Select an image that you want to delete by pressing the LEFT / RIGHT button and press the DELETE( ) button. 2. A message will display as shown alongside on the LCD monitor. 3. Press the OK button to delete the image. The image that precedes the deleted one will then be displayed on the LCD monitor. DELETE? DEL:OK CANCEL: Deleting Images in Thumbnail Display Mode 1.
Setting up the play back function using the LCD monitor PLAY mode functions can be changed by using the LCD monitor. In the PLAY mode, pressing the MENU button displays the menu on the LCD monitor. The menus you can set up in Play mode are as follows. To capture an image after setting up the play menu, press the PLAY button. The items indicated by Menu tab are default settings. Main menu DEL. ALL Sub menu Secondary menu NO - YES - Page p. 52 UNLOCK ONE PIC LOCK p.
Setting up the play back function using the LCD monitor Menu tab Main menu IMAGES Sub menu Secondary menu ONE PIC - ALL PICS - DEFAULT - Page p. 59 POSTCARD SIZE 4X6, 8X10 A6, A4, B5 FULL LAYOUT P I C T INDEX C PLAIN U SETUP B R I D G E S 1, 2, 4, 6, 8 PAPER PHOTO T FASTPHO. O DRAFT M QUALITY p. 60 NORMAL FINE ON DATE OFF ON FILENAME RESET OFF PRINT - p. 58 DPOF PRN - p. 58 NO - YES - p. 58 Menus are subject to change without prior notice.
Deleting all images Of all the files stored in the memory card, the unprotected files in the DCIM subfolder will be deleted. (The files that were stored in the AVATAR folder will not be deleted.) Deleting all images 1. Press the play mode button and press the menu button. 2. Press the LEFT/ RIGHT button and select the [DEL.ALL] menu tab. 3. Select a desired sub menu by pressing the UP/ DOWN DEL.ALL button and press the OK button. NO Selecting [NO] : The display returns to the initial menu.
Protecting images 4. Select the desired secondary menu by pressing the UP/DOWN button and press the OK button. [UNLOCK] : Cancels the protect function. [LOCK] : Sets up the protect function. LOCK - If you select the[ONE PIC] sub menu at step 3, you can EXIT:SH1 protect or unprotect another image by pressing the MOVE PIC: SET:OK LEFT/ RIGHT button. If you press the SHUTTER button, the Image Protection menu will disappear. - If you selected [ALL] in Step 3, the Image Protection menu will disappear.
Resize A stored image size can be changed and used as a logo image. The resized image will have a new file name. 1. Press the play mode button and press the menu button. 2. Press the LEFT/ RIGHT button and select the [RESIZE] menu tab. 3. Select a desired sub menu by pressing the UP/ DOWN button and press the OK button.
Rotating an image You can rotate the stored images by 90, 180, or 270 degrees. 1. Press the play mode button and press the menu button. 2. Press the LEFT/ RIGHT button and select the [ROTATE] menu tab. ROTATE 3. Select a desired sub menu by pressing the UP/ DOWN button. OFF ON If [OFF] is selected : Press the OK button to cancel the MOVE: SET:OK image rotation. If [ON] is selected : If you press the OK button, an auxiliary menu from which you can select a rotation orientation will appear.
DPOF : STANDARD This function allows you to embed print quantity information on a stored image. 1. Press the play mode button and press the menu button. 2. Press the LEFT/ RIGHT button and select the [DPOF] menu tab. 3. Select the [STANDARD] menu by pressing the UP/ DPOF DOWN button and press the RIGHT button. STANDARD ONE PIC 4. Use the UP and DOWN buttons to select [ONE PIC] or INDEX ALL PICS SIZE [ALL PICS], and then press the OK button. A window for BACK: SET:OK selecting number of copies.
DPOF : PRINT SIZE You can specify the print size when printing images stored on the memory card. The print size you set will be applied to all pictures stored on the memory card. Setting the Print Size 1. Press the play mode button and press the menu button. 2. Press the LEFT/ RIGHT button and select the [DPOF] menu tab. DPOF 3. Select the [SIZE] menu by pressing the UP/ DOWN STANDARD 3X5 button and press the RIGHT button. INDEX 4X6 SIZE 5X7 4.
PictBridge You can use the USB cable to connect this camera to a printer that supports PictBridge (sold separately) and print the stored images directly. Movie clips and voice files cannot be printed. You can set up the following settings from the PictBridge menu. IMAGES : Setting up the scope of PictBridge PRINTER SETUP : Setting up printing PRINT : Printing pictures DPOF AUTO PRINT : Printing the DPOF files RESET : Initializing the PictBridge functions Connecting the Camera to a Printer 1.
PictBridge: Picture Selection You can select the scope of the PictBridge function. 1. Connect the camera to your printer. The USB menu must be set to [PRINTER] before you connect the camera to the printer.(See p.58) PICTBRIDGE 2. The [PICTBRIDGE] menu will appear. IMAGES ONE PIC SETUP ALL PICS 3. Use the UP and DOWN buttons to select [IMAGES], and PRINT then press the RIGHT button. BACK: SET:OK 4. Use the UP and DOWN buttons to select the desired submenu value, and then press the OK button.
PictBridge: Print Setting You can select the Paper Size, Print Format, Paper Type, Print Quality, Date Print, and File Name Print menus for printed pictures. 1. Connect the camera to your printer. The USB menu must be set to [PRINTER] before you connect the camera to the printer.(See p.58) PICTBRIDGE 2. The [PICTBRIDGE] menu will appear. IMAGES SETUP DEFAULT 3. Use the UP and DOWN buttons to select [PRINTER PRINT CUSTOM SETUP], and then press the RIGHT button. BACK: SET:OK 4.
PictBridge: Picture Printing Printing Pictures 1. Connect the camera to your printer. The USB menu must be set to [PRINTER] before you connect the camera to the printer.(See p.58) 2. The [PICTBRIDGE] menu will appear. 3. Use the UP and DOWN buttons to select the [PRINT] menu, and then press the OK button. PICTBRIDGE IMAGES SETUP PRINT MOVE: 00 PRINTS CUSTOM SET:OK 4. The screen shown on the right will appear and the picture will be printed.
PictBridge : DPOF AUTO PRINT This allows you to directly print the files with DPOF information. For instructions on how to set up DPOF, refer to pages 55 to 57. 1. Connect the camera to your printer. The USB menu must be set to [PRINTER] before you connect the camera to the printer.(See p.58) 2. The [PICTBRIDGE] menu will appear. 3. Use the UP and DOWN buttons to select the [DPOF PRINT] menu, and then press the OK button. 4. The screen shown on the right will appear and the picture will be printed.
Setup menu In this mode, you can set up basic settings. You can use the setup menu in all camera modes, except Voice Recording mode. The changed setup mode values will be maintained even if you turn the camera off and then back on. The items indicated by are default settings. Menu tab Main menu Sub menu Secondary menu RESET Page p.65 FILE SERIES CANCEL p.65 POWER OFF ON 01 ~ 03 ~10 MIN KOREAN JAPANESE ENGLISH RUSSIAN FRENCH PORTUGUESE GERMAN DUTCH SPANISH DANISH p.
Setup menu Menu tab Main menu Sub menu Secondary menu OFF SOUND Page p.69 LOW MEDIUM HIGH DARK LCD p.69 NORMAL BRIGHT VIDEO NTSC p.70 PAL OFF Q.VIEW 1 ~ 5 SEC USB RESET COMPUTER p.71 DEL.ANS. ON OFF p.72 PRINTER NO p.72 YES File name This function allows the user to select the file naming format. Assigning File Names 1. In any mode other than Voice Recording mode, press the MENU button. 2. Press the LEFT/ RIGHT button and select the [SETUP] SETUP menu tab. FILE RESET PWR OFF SERIES 3.
File name INFORMATION The first stored folder name is 100SSCAM, and the first file name is SUC30001. Whenever you store an image, the file number is increased by 1. The file numbers are named from SUC30001 to SUC39999 automatically, 9999 files will be stored in a folder. The folder number is assigned sequentially from 100 to 999 as follows: 100SSCAM 101SSCAM ~ 999SSCAM. The files used with the memory card conform to the DCF(Design rule for Camera File systems) format.
Language There is a choice of languages that can be displayed on the LCD monitor. Even if the batteries or AC adapter are removed and inserted again, the language setting will be preserved. Setting Language 1. In any mode other than Voice Recording mode, press the MENU button. 2. Press the LEFT/ RIGHT button and select the [SETUP] menu tab. SETUP 3. Select the [LANGUAGE] menu by pressing the UP/ ENGLISH FILE DOWN button and press the RIGHT button. PWR OFF 4.
Setting up the Date/ Time/ Date type You can change the date and time that will be displayed on the captured images and set up the date type. Setting Date/Time & Selecting Date type 1. In any mode other than Voice Recording mode, press the MENU button. 2. Press the LEFT/ RIGHT button and select the [SETUP] SETUP menu tab. LANGUAGE 3. Select the [DATE] menu by pressing the UP/ DOWN 03/01/01 12:00 FORMAT button and press the RIGHT button. YY/MM/DD DATE 4.
Imprinting the recording date INFORMATION The Date & Time are imprinted at the bottom right side of the still image. The date will be imprinted as a DATE TYPE setting. TIME is imprinted in the following way : [Hour : Minute] and hours are shown using the 12 hour clock. The imprint function is applied only to still images. Function lamp You can turn on and off the function lamp located on the front of the camera. Setting the function lamp 1.
Sound If you set the operation sound to ON, various sounds will be activated for camera startup, when button are pressed, and if there is a card error, so that you can be aware of the camera operation status. Setting Operation Sounds 1. In any mode other than Voice Recording mode, press the MENU button. 2. Press the LEFT/ RIGHT button and select the [SETUP] menu tab. 3. Select the [SOUND] menu by pressing the UP/ DOWN button and press the RIGHT button. 4.
Selecting Video out type The Movie output signal from the camera can be NTSC or PAL. Your choice of output will be governed by the type of device (monitor or TV, etc.) to which the camera is connected. PAL mode can support only BDGHI. Setting the Video Out Type 1. In any mode other than Voice Recording mode, press the MENU button. 2. Press the LEFT/ RIGHT button and select the [SETUP] menu tab. 3. Select the [VIDEO] menu by pressing the UP/ DOWN button and press the RIGHT button. 4.
Quick view If you enable Quick View before capturing an image, you can view the image you just captured on the LCD monitor for the duration set in the [Q.VIEW] setup. Quick view is possible only with still images. Setting Quick View 1. In any mode other than Voice Recording mode, press the MENU button. 2. Press the LEFT/ RIGHT button and select the [SETUP] SETUP menu tab. LCD 3. Select the [Q.VIEW] menu by pressing the UP/ DOWN VIDEO OFF Q.VIEW button and press the RIGHT button. BACK: 4.
Connecting an External Device (USB) You can select an external device to which you want to connect the camera using the USB cable. Selecting an External Device 1. In any mode other than Voice Recording mode, press the MENU button. 2. Press the LEFT/ RIGHT button and select the [SETUP] SETUP menu tab. VIDEO Q.VIEW COMPUTER 3. Select the [USB] menu by pressing the UP/ DOWN button USB PRINTER and press the RIGHT button. BACK: SET:OK 4.
Setting up the MYCAM menu You can set up a start up image, start up sound, shutter sound and AVATAR. Every camera working mode (with the exception of Voice recording mode) has the MyCAM menu. Menu tab Main menu Sub menu Page OFF AVATAR S.IMAGE S.SOUND SH.SOUND P.74 CHANGE OFF IMAGE1 IMAGE2 IMAGE3 OFF SOUND1 SOUND2 SOUND3 OFF SOUND1 SOUND2 SOUND3 P.75 P.76 P.
Avatar Storing Avatars for the Startup Image and Selecting One as the Startup Image 1. In a mode other than Voice Recording mode, press the MENU button. 2. Use the LEFT and RIGHT buttons to select the [MYCAM] menu tab. 3. Select [AVATAR] menu by pressing the UP/ DOWN button and press the RIGHT button. 4. Select a desired sub menu by pressing the UP/ DOWN button and press the OK button. If [NO] is selected : The avatar will not be used as the startup image during power-on.
Avatar Playing Back an Avatar 1. Press the PLAY ( ) button to select Play mode. 2. The last image taken will be displayed on the LCD monitor. 3. Use the LEFT and RIGHT buttons to select an avatar file for playback. PLAY 4. Press the PLAY/PAUSE ( ) button. The selected avatar will be played. - To pause playback of the avatar file, press the PLAY/PAUSE ( ) button again. - During avatar playback, press the LEFT or RIGHT button to rewind or fast-forward the avatar file.
Start up image INFORMATION Only an image that is saved as a LOGO in the [RESIZE] sub menu can be used as the start up image. The logo image will not be deleted by the [DEL.ALL] or [FORMAT] menu. Start up sound You can select the sound that is activated whenever the camera is turned on. Setting the Startup Sound 1. In any mode other than Voice Recording mode, press the MENU button. 2. Press the LEFT/ RIGHT button and select the [MYCAM] menu tab. 3. Select the [S.
List of camera functions D : Default - : There is no related menu. K : Altered settings and values are maintained even after the camera is turned off. (KEEP) R : A default value is restored when the camera is turned off. (RETURN) O : A default value is restored after the function has been executed. (ONCE) : Settings can be stored in Myset mode.
List of camera functions Camera working mode Function Recording Auto Play Voice Movie recording clip Night Manual Still image Movie clip Voice memo Auto K(D) K(D) K(D) K(D) - - - - Daylight R - K R - - - - White Cloudy R - K R - - - - balance Fluorescent R - K R - - - - Tungsten R - K R - - - - User set R - K R - - - - NORMAL K(D) K(D) K(D) K(D) - - - - EFFECT Sharpness Flash B&W R - K R - - - - SUNSET R - K R - - - - S
List of camera functions Camera working mode Function Self-timer Recording Auto Night Manual Play Voice Movie clip Still image Movie clip Voice memo recording Off K(D) K(D) K(D) K(D) - - - - 2sec R R R - - - - - 10sec R R R - - - - - Voice Do not record - - - - - - - - recording Record - - - - - - - K(D) Voice Do not record K(D) K(D) K(D) - K(D) - - - memo Record R R R K(D) R - - - 80 cm ~ infinity K(D) K(D) K(D) K(D) - - - - 5
List of camera functions Camera working mode Function ONE PIC ALL PICS DEFAULT CUSTOM IMAGES POSTCARD 4X6 8X10 A6 A4 B5 FULL L 1 A 2 Y 4 O 6 U 8 T INDEX PLAIN PAPER PHOTO FAST PHOTO DRAFT QUALITY NORMAL FINE OFF DATE ON OFF FILENAME ON PRINT DPOF PRN C U S T O M I Z E P i c t B r i d g e S E T U P RESET 80 NO YES Movie Recording Auto - Night Manual - - clip - Voice Play Still image Movie clip Voice memo recording K(D) O K(D) O K(D) R R R R R K(D) R R R R R R K(D) R R K(D) R R K(D) R K(D) R
List of camera functions Function Camera working Recording Voice Movie Play mode Auto Night Manual clip Still image Movie clip Voice memo recording No - - - - K(D) - - - YES - - - - O - - - E 1600X1200 - - - - O - - - d 1024X768 - - - - O - - - 640X480 - - - - O - - - LOGO - - - - O - - - Trimming i RESIZE t ROTATE Deletion DEL.
List of camera functions Camera working mode Function Date type SOUND LCD VIDEO Q.VIEW RESET AVATAR S.IMAGE S.SOUND SH.SOUND Night Manual Play Movie Voice clip Still image Movie clip Voice memo recording Y/M/D K(D) - M/D/Y K - D/M/Y K - OFF K - LOW K - MEDIUM K(D) - HIGH K - DARK K - NORMAL K(D) - BRIGHT K - NTSC K - PAL K - OFF K - 1 sec. K(D) - 2~5 sec. DEL.ANS.
Starting PC mode If you connect the USB cable to a USB port on your PC and then turn on the power, the camera will automatically switch to "computer connection mode". In this mode, you can download stored images to your PC through the USB cable. The LCD monitor is always turned off in PC mode. The camera status lamp will illuminate when the files are transferring via the USB connection. Connecting the camera to a PC 1. Turn the PC power on. 2. Turn the camera power on. 3.
Starting PC mode Downloading stored images You can download the still images stored on the camera to your PC's hard disk and print them or use photo editing software to edit them. 1. Use the supplied USB cable to connect the camera to your computer and then turn on the camera. 2. On your computer’s desktop display, select [My computer] and double click [Removable Disk DCIM 100SSCAM]. The image files will then be displayed. 3. Select an image and press the right mouse button. 4. A pop-up menu will open.
Starting PC mode 7. An image file is transferred from the camera to your PC. - By using [Digimax Viewer], you can see the stored images in the memory directly on the PC monitor and you can copy or move the image files. (p.112) Important notes Be sure to observe the following precautions! This unit contains precision electronic components. Do not use or store this unit in the following locations. - Areas exposed to severe changes in temperature and humidity. - Areas exposed to dust and dirt.
Important notes Caution on Using the Lens - If the lens is subjected to direct sunlight, it could result in discoloration and deterioration of the image sensor. - Do not apply excessive force to the zoom lens. - Pay attention not to get fingerprints or foreign substances on the surface of the lens. If the digital camera is not used for a long period, an electric discharge can occur.
Warning indicator There are several warnings that may appear on the LCD display Warning indicator Causes - Memory card error - Turn off the camera power and turn it on again - Insert the memory card again - Format the memory card (p.
Before contacting a service center Please check the following Symptom Causes - There is low battery capacity - An AC Power Adapter is not The camera doesn t connected - Batteries are inserted switch on incorrectly with the reverse polarities. The camera power ceases whilst in use Batteries drain quickly Camera does not take images when pressing the Shutter button The camera suddenly stops working while in use.
Before contacting a service center Symptom Causes Remedy - A picture was taken within 0.8 m from the subject without setting an appropriate macro mode. - Taking a picture beyond the flash range - The lens is smudged or dirty. - If the subject is closer than 0.8m, select macro shot mode.
Before contacting a service center Symptom Causes Remedy Colour of image is different to the original scene - White balance setting is incorrect. - Select appropriate White balance. Images are too bright - Exposure is excessive. - Reset exposure compensation. - Check the connection cables. No image on external monitor - The external monitor has not been connected properly with the camera. - There are incorrect files in the memory card. - Cable connection is incorrect. - The camera is off.
Specifications Type Effective Pixel Total Pixel Image Sensor Focal Length Lens F No. Digital Zoom Optical Viewfinder LCD Monitor Type Viewfinder Focusing Range Type Speed Shutter Control Compensation ISO Equivalent Exposure Manual Modes Range Recharging Time Flash Sharpness Effect White Balance Voice Recording Date Imprinting Still Image Shooting Movie Clip Media Storage File Format Image Size 1/2.7" CCD Approx. 3.2 Mega-pixel Approx. 3.3 Mega-pixel SHD Lens f = 5.8 ~ 17.
Specifications Storage Capacity (32MB) Image Play Format Edit Interface Power Source Dimensions (WxHxD) Weight Operating Temperature Operating Humidity Camera Driver Software Application Special Features System Requirements For Windows For Macintosh 2048 : Super fine 17, Fine 33, Normal 50 2048P : Super fine 19, Fine 38, Normal 56 1600 : Super fine 27, Fine 54, Normal 82 1024 : Super fine 66, Fine 132, Normal 198 640 : Super fine 169, Fine 336, Normal 501 * These figures are measured under Samsung
Software Notes Please ensure that you read the instruction manual carefully before use. The attached software is a camera driver and image editing software tool for Windows. Under no circumstances should all or part of either the software or the user manual be reproduced. Copyrights for software are licensed only for use with a camera. In the unlikely event of a manufacturing fault, we will repair or exchange your camera.
Software Notes QuickTime Player : The program for playing back QuickTime movies (.mov). It can also play video files compressed with MPEG4 codec. Digimax Viewer 2.1 : This is a program for viewing stored images. You can see the stored images in the memory directly on a PC monitor. You can also copy, move or delete the images and enlarge /downscale the image sizes with Digimax Viewer. This software is only compatible with Windows.
Setting up the application software To use this camera with a PC, install the application software first. After this has been done, the stored images in the camera can be moved to the PC and can be edited by an image editing program. INFORMATION Close other programs before installing the application software. Before installing the application software, disconnect the USB connection. You can visit the Samsung web-site through the internet. http://www.samsungcamera.com : English http://www.samsungcamera.co.
Setting up the application software 5. The Software License Agreement window will open, asking you to agree to the licensing. Use the button on the bottom left to select the language of your choice, and then click [Agree] to accept the license agreement. The installation will proceed to the next stage. If you do not agree to the license agreement, click [Disagree]. The installation will be canceled. If the language of your choice is not listed, please select [English]. 6.
Setting up the application software The QuickTime program folder will appear. Click on the Close button to close the folder. 10. The QuickTime Settings - Introduction window appears. Click [Next >]. [Click !] [Click !] 11. Set the transfer rate for downloading content from the Internet, and then click [Next >]. [Click !] 13. Specify the file types you want to associate with QuickTime. Click [Finish]. 12. Set up your browser for QuickTime plug-in. Click [Next >]. [Click !] 14.
Setting up the application software * The QuickTime Player will launch, the readme file will open, and the Step 15 window will open. Click on the Close 1 and Close 2 buttons to exit the program. [Close 1 button] 15. A window where you can choose the program you want to install will appear. Click [Install]. For information on application software, please refer to page 94. [Click !] If you select [Cancel] , the application program installation will be cancelled. 16. The [Digimax Viewer 2.
Setting up the application software 18. A destination selection window will open. Click [Next >]. To copy to the files to another folder, click [Browse (R)..] and choose a folder you want. [Click !] 19. A window will open, asking you to choose a folder to which program icons will be added. Click [Next >]. If you want to add the program icons to a different folder, choose another folder, and then click [Next >]. [Click !] 20. Installation is completed.
Setting up the application software 23. The Software License Agreement window will be displayed. If you agree to this, click [Yes], the window will then move to the next step. If you disagree, click [No] and the installation program will be canceled. [Click !] 24. The [Choose Installation Type] window will open. Click [Next >]. [Full] : the program will be installed with all the options. [Custom] : you can choose what you would like to install. [Click !] 25.
Setting up the application software * The MGI III file will open. Click on the Close button to close the window. [Click !] 29. The Installation Wizard is finished now. Choose [Yes, I want to restart my computer now], and then click [Finish] to restart your PC. Choose [No, I will restart my computer later], and then click Finish to restart your PC later. To proceed with the installation of DigiStudio (an avatar creation program), choose [No, I will restart my computer later]. [Click !] 30.
Setting up the application software INFORMATION If you have installed the camera driver, [Found New Hardware Wizard] may not open. On a Windows 98 or 98 SE system, the Found New Hardware Wizard dialog box opens and a window asking you to select a driver file may appear. In this case, specify the [D:\Digimax UCA3\Win 98FE_SE Driver] folder on the supplied software CD. When connecting the camera to your PC, it is recommended that you use an AC power adapter.
DigiStudio Installation guide System Requirements for DigiStudio DigiStudio requires the following minimum system configuration for smooth 3D performance. If your system does not meet the requirements, you will receive error messages and the installation will not continue.
DigiStudio Installation guide Cautions on the Graphic Card (VGA) The DigiStudio software will not install on a PO with a graphic card that does not support 3D acceleration and that has less than 8 MB video RAM. If the graphic card error screen appears while using DigiStudio, please go through the following steps: Step 1 : Go to My Computer Control Panel and color palette settings. Display Settings, check the display type Step 2 : Set the color palette to High Color (16 bit) or True Color (32 bit).
DigiStudio Installation DigiStudio is a 3D avatar creation program. You can store 3D avatar files on the camera and use one of the avatars as the startup image. Be sure to check the system requirements (p. 103) before installing the program. This software is available in the Windows version only. Be sure to install the camera driver before transferring the avatars to the camera. (See page 95.) For instructions on how to use DigiStudio, please refer to Help. 1.
DigiStudio Installation 6. The Software License Agreement window will appear, asking you to agree to the licensing. Use the button on the bottom left to select the language of your choice, and then click [Agree] to accept the license agreement. The installation will proceed to the next stage. If you do not agree to the license agreement, click [Disagree]. The installation will be canceled. If the language of your choice is not listed, please select [English]. 7.
DigiStudio Installation 13. The [Connection Speed] window will open. Click [Next]. To choose another transfer rate, click and select the desired transfer rate. 14. The Browser Plug-in window will open. Click [Next]. 15. The File Type Association window will open. Click [Finish]. If you want to associate other file formats with QuickTime, put a checkmark (V) besides the file formats you want. 16. The Finished window will open. Click [Close].
Removing the USB Driver for Windows 98SE To remove the USB driver, refer to the process shown below. 1. Trace [Start Settings] and click [Control Panel]. 2. Double-click [Add/Remove programs]. 3. The [Add/Remove Programs Properties] window will open. Click [Digimax U-CA3 Camera] and click the [Add/Remove] button. [Click !] 4. A window will open. Click the [OK] button and the camera driver will be removed. 5. Uninstallation is complete. Click the [Finish] button and the window will disappear.
Removable Disk To use this camera as a Removable Disk, install (p.95) the USB Driver. 1. Before turning the camera power on, connect the camera to the PC with the USB cable. 2. Click [Removable Disk] under [My computer] or [Windows Explorer]. 3. Image files stored in the Removable Disk (DCIM 100SSCAM) can be transferred to the PC. INFORMATION Important information whilst using the Removable Disk The [Removable Disk] indicator will not show when the camera power is off.
Removing the removable disk Windows 98SE 1. Check whether the camera and PC are transferring a file. If the function lamp blinks, you have to wait until the lamp illuminates. 2. Unplug the USB cable. Windows 2000/ME/XP (The illustrations may be different from the real display in accordance with the Windows O/S.) 1. Check whether the camera and PC are transferring a file. If the function lamp blinks, you have to wait until the lamp illuminates. 2.
Removing the removable disk 6. A [Unplug or Eject Hardware] window will open. Click the [Close] button and the removable disk will be removed safely. 7. Unplug the USB cable. [Click !] Setting up the USB Driver for MAC 1. A USB Driver for MAC is not included with the software CD as MAC OS supports the camera driver. 2. Check the MAC OS. You can check the MAC OS version during MAC OS start-up. This camera is compatible with MAC OS 9.X~10.2. 3.
Digimax Viewer 2.1 This software is only compatible with Windows. 1. To open Digimax Viewer, click the [Start Programs Samsung Digimax Viewer 2.1 Digimax Viewer 2.1 ] and Digimax Viewer 2.1 will then open. 2. If the [Auto Launch] option is selected, this program will be executed automatically with recognizing the camera. 3. You can easily use the Digimax viewer 2.1 program as it offers a FILE menu and TOOL bar.And, you can use the pop up menu. Click an image and press the right mouse button.
MGI PhotoSuite III SE This software is only compatible with Windows. To open MGI PhotoSuite lll SE, click the [Start Programs PhotoSuite lll SE] and MGI PhotoSuite lll SE will then open. MGI PhotoSuite lll SE MGI An introduction to the Welcome screen Get Get images. Prepare A number of photo editing activities can be performed within this module. Compose Use your photos in a variety of fun, creative and interesting ways. Organize Organize your photos and other media files into albums.
MGI PhotoSuite III SE Introduction to navigation bar Back Return to the previous step. Home Return to Welcome screen. Help Display help window. Get Get images. Prepare A number of photo editing activities can be performed within this module. Compose Use your photos in a variety of fun and interesting ways. Organize Organize your photos and other media files into albums. Share Save your results to show to others. Print Print hard copies of photos and projects. Browse Browse the web site.
MGI PhotoSuite III SE Get To obtain images from the computer 1. To acquire images, Click the large [Get] button on the Welcome screen, or the [Get] button on the Navigation bar. Click [Computer] from the list of options displayed on the activity panel. 2. The Open file selector is displayed. Now select the image file and click [open]. 3. The Welcome screen will change to the next work step, with the selected image displayed. When you obtain images from the digital camera.
MGI PhotoSuite III SE 3. Select the [ DCIM 100sscam ] folder. Then select an image and click [ Open ]. 4. The Welcome screen will change to the next work step, with the selected image displayed. NOTICE When you use the Digimax camera, only [Computer] and [Album] from the list of options displayed are available. You will be able to obtain images from the digital camera. [Computer and Album Only] Acquiring images from an Album. 1.
MGI PhotoSuite III SE 2. After selecting Album on the [ Choose a photo album], click an image in the album and click [Open]. 3. The Welcome screen will change to the next work step, with the selected image displayed. Refer to page 120 for more information about creating an Album. Prepare When the image is loaded, the step changes to Prepare automatically. Menu for [PREPARE] steps Rotate & Crop You can rotate, flip or crop images along with a host of others. Touchup Remove Red eye, Remove Scratches etc..
MGI PhotoSuite III SE Compose Add text, Compound Images etc. are available in this step. Menu of [COMPOSE] steps Collages : A collage consists of several photos or sections of photos arranged together on a common background. Photo Layouts : The Photo Layouts activity includes many collage and layout options. Cards & tags : Use your photos to create items such as Gift Tags, Greeting Cards, Invitations, Postcards, and Sports Cards.
MGI PhotoSuite III SE Organize Organize your photos and other media files into albums. Menu of [ORGANIZE] steps [ Choose a photo album to view or edit] Select Album : To create an Album, click [Organize] in the welcome screen or navigation bar. Album.. : Open Master Album. [ Select a photo, and choose an action below.] - Open : Open selected image. - Delete : Delete selected image. - Properties... : view image information. [ Choose an action to manage your album.
MGI PhotoSuite III SE Creating an Album 1. To create an Album, click the large Organize button on the Welcome screen, or the Organize button on the Navigation bar. 2. Click [Album..] in [ Choose a photo album to view or edit.] [Click!] 3. The Master Album window will be displayed, then click [New..]. [Click!] 4. Put a new Album name in the New Album window and click [OK]. A new album will now be created. [Click!] 5. A [Master Album] window will open. Click the [OK] button.
MGI PhotoSuite III SE Add images to the album 1. Select [ Choose an action to manage your album. Add..] to add images to the album. [Click!] 2. Click [Computer] in Add Photos menu. [Digital Camera(Direct)], [Scanner(TWAIN)], [Digital Camera(TWAIN)] sources can't be used. [Click!] 3. A [Add photo to Album] window will open. Select images that you want to add. Click the [Add] button. [Click!] 4. Adding images is complete.
MGI PhotoSuite III SE Share Saving or sharing images. Menu of [SHARE] steps Save To save the active file according to its current name and path. Save As To assign a new name or path to the file. Send E-mail e-mailing images. Slide Show Viewing images as a slide show. Print You can print images. Menu for the [PRINT] steps Print Printing images. Print Multiples Print multiple copies of a photo or project, or one copy of each of the photos included in an album, according to a predefined template.
FAQ Please check the following if the USB connection malfunctions. [Case 1] The camera power is off. Turn the camera power on. We recommend using an AC power adapter in PC mode. [Case 2] USB Driver is not installed correctly. Install the USB Driver correctly. Refer to page 95. [Case 3] The USB cable is not connected or you are using a cable with an incorrect specification. Use a USB cable with the correct specification. [Case 4] The camera is not recognized by your PC.
FAQ Win XP : Trace [Start Control Panel Performance and Maintenance System Hardware Device Manager Universal Serial Bus controller]. There must be USB Host Controller and USB root hub under [Universal serial bus controller]. When all the conditions mentioned above are met, the computer can support the USB interface. [Case 7] When using the USB hub. There may be a problem in connecting the camera to the PC through the USB hub if the PC and the hub are not compatible.
MEMO 125
MEMO 126
MEMO 127
SAMSUNG TECHWIN CO., LTD. OPTICS & DIGITAL IMAGING DIVISION 145-3, SANGDAEWON 1-DONG, JUNGWONGU,SUNGNAM-CITY, KYUNGKI-DO, KOREA 462121 TEL : (82) 31-740-8086,8088, 8090, 8092, 8099 FAX : (82) 31-740-8398, 8111 SAMSUNG OPTO-ELECTRONICS AMERICA, INC. HEADQUARTERS 40 SEAVIEW DRIVE, SECAUCUS, NJ07094, U.S.A. TEL : (1) 201-902-0347 FAX : (1) 201-902-9342 WESTERN REGIONAL OFFICE 18600 BROADWICK ST., RANCHO DOMINGUEZ, CA 90220, U.S.A.
