Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Instructions on how to use the memory card Maintenance of the memory card Be sure to format the memory card (see p.71) if you are using a newly purchased memory for the first time, if it contains data that the camera cannot recognise, or if it contains images captured with a different camera. Turn off the camera power whenever the memory card is being inserted or removed. Repeated use of the memory card will eventually reduce the memory card’s performance.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Important notes Be sure to observe the following precautions! This unit contains precision electronic components. Do not use or store this unit in the following locations. - Areas exposed to severe changes in temperature and humidity. - Areas exposed to dust and dirt. - Areas exposed to direct sunlight or the inside of a vehicle in hot weather. - Environments where there is high magnetism or excessive vibration. - Areas with high explosives or highly flammable materials.
Important notes If the camera is exposed to an electronic interference, it will turn itself off to protect the memory card. Camera Maintenance - Use a soft brush (available from photo stores) to gently clean the lens and LCD assemblies. If this does not work, lens-cleaning paper with lens cleaning fluid can be used. Clean the camera body with a soft cloth. Do not allow this camera to come into contact with solvent materials such as benzol, insecticide, thinners etc.
Warning indicator There are several warnings that may appear on the LCD display Warning indicator Causes Remedy - Memory card error - Turn off the camera power and turn it on again - Insert the memory card again - Format the memory card (p.
Before contacting a service centre Please check the following Symptom Causes Remedy - Insert fresh batteries - Connect an AC Power Adapter The camera doesn t switch on - There is low battery capacity - An AC Power Adapter is not connected - Batteries are inserted incorrectly with the reverse polarities The camera power ceases while in use - The batteries are exhausted - The Camera is turned off automatically - The Adapter plug is not connected securely - Insert fresh batteries - Press the power butto
Before contacting a service centre Symptom Causes Remedy - A picture was taken within 0.8 m from the subject without setting an appropriate macro mode - Taking a picture beyond the flash range - The lens is smudged or dirty - If the subject is closer than 0.
Before contacting a service centre Symptom Causes Remedy Colour of image is different to the original scene - White balance setting is incorrect - Select appropriate White balance Images are too bright - Exposure is excessive - Reset exposure compensation - Check the connection - Turn the camera on - Insert new batteries or check the adapter connection When using the PC’s explorer, the [Removable Disk] file does not show - Cable connection is incorrect - The camera is off - There are no batteries
Specifications Image Sensor Type 1/2.7" CCD Effective Pixel Approx. 4.0 Mega-pixel Total Pixel Approx. 4.2 Mega-pixel Focal Length F No. Lens Digital Zoom LCD Monitor Focusing SHD Lens f = 5.8 ~ 17.4mm (35mm film equivalent : 38 ~ 114mm) F 2.9 ~ F 5.0 Still Image mode : 1.0X ~ 4.0X Play mode : 1.0X ~ 5.0X (depends on image size) 1.8" colour TFT LCD Type TTL auto focus Range Normal : 80cm ~ infinity Type Mechanical and Electronic shutter Speed 2 ~ 1/2,000 sec.
Specifications File Format Image Size Still Image : JPEG (DCF), DPOF 1.1, EXIF 2.2, PictBridge 1.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Starting PC Mode Downloading stored images You can download the still images stored on the camera to your PC's hard disk and print them or use a photo editing software to edit them. 1. Connect the camera to your PC with the USB cable. 2. On your computer's desktop display, select [My computer] and double click [Removable Disk → DCIM → 100SSCAM]. The image files will then be displayed. 3. Select an image and press the right mouse button. 4. A pop-up menu will open. Click [Cut] or [Copy] menu.
Starting PC Mode 6. Press the right mouse button and a pop-up menu will open. Click [Paste]. 7. An image file is transferred from the camera to your PC. - By using [Digimax Viewer], you can see the stored images in the memory directly on the PC monitor and you can copy or move the image files. Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Using PhotoImpression With PhotoImpression, you can edit or store still images that you downloaded from the camera. This software is only available in Windows version. To start the program, click [Start → Programs → ArcSoft PhotoImpression → PhotoImpression]. The following screen will appear. [ Help Button ] [ Command Button ] [ Tool Bar ] You can use PhotoImpression to perform the following tasks.
Downloaded From camera-usermanual.
FAQ [Case 4] The camera is not recognised by your PC. Sometimes, the camera may appear under [Unknown Devices] in Device Manager. → Install the camera driver correctly. Turn off the camera, remove the USB cable, plug in the USB cable again, and then turn on the camera. [Case 5] There is an unexpected error during file transfer → Turn the camera power off and on again. Transfer the file again.
FAQ [Case 9] When I open the Device Manager (by clicking Start → (Settings) → Control Panel → (Performance and Maintenance) → System → (Hardware) → Device Manager), there are Unknown Devices or Other Devices entries with a yellow question mark(?) beside them or devices with an exclamation mark(!) beside them. → Right-click on the entry with the question(?) or exclamation (!) mark and select "Remove". Restart the PC and connect the camera the again.
FAQ 2. Compatible problems with the codecs installed onto the PC. → If the movie clip doesn't play back after installing the JPEG Decoder, refer to the following. 1) When the movie clip plays back, only the sound plays back without the image. It isn't compatible with the Mogen MJPEG Decoder. Uninstall the Mogen MJPEG Decoder as following order. Click [Start → Run] and a window will open. Type "regsvr32 /u m3jpgdec.ax" and press the Enter key.
MEMO Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
