SAMSUNG TECHWIN CO., LTD. OPTICS & DIGITAL IMAGING DIVISION 145-3, SANGDAEWON 1-DONG, JUNGWONGU,SUNGNAM-CITY, KYUNGKI-DO, KOREA 462-121 TEL : (82) 31-740-8086,8088, 8090, 8092, 8099 FAX : (82) 31-740-8398, 8111 SAMSUNG OPTO-ELECTRONICS AMERICA, INC. HEADQUARTERS 40 SEAVIEW DRIVE, SECAUCUS, NJ07094, U.S.A. TEL : (1) 201-902-0347 FAX : (1) 201-902-9342 WESTERN REGIONAL OFFICE 18600 BROADWICK ST., RANCHO DOMINGUEZ, CA 90220, U.S.A. TEL : (1) 310-537-7000 FAX : (1) 310-537-1566 SAMSUNG OPTO-ELECTRONICS UK LTD.
Instructions Use this camera in the following order Set up the camera driver Take a picture Insert the USB cable 2 Before connecting the USB cable to the PC and this camera, you have to set up the camera driver. Install the camera driver that is contained in the Application S/W CD-ROM. (p.99) Take a picture (p.35~57) Insert the supplied USB cable into the PC USB port and the camera USB connection terminal. (p.86~88) Check the camera power Check the camera power.
Special features READY This digital camera has the following features. A fine resolution of 2.0 mega pixels A 3X optical and 2X digital zoom lens Movie clip recording function Date imprinting on a still image Multiple language support An FCC warning This device has been tested in accordance with the limits of a class B digital device under item 15 of the FCC rules. These limits are designed to provide protection against harmful interference in commercial installation.
Contents Ready Getting to know your camera Safety note This digital camera can be used for Manufacturer s contents Identification of features Product Exterior(Front / Top / Side) Product Exterior (Back) Viewfinder/ AF indicator lamp/ Flash indicator lamp LCD monitor indicator Camera mode definition MOVIE CLIP mode STILL IMAGE mode PLAY mode SETUP mode LCD monitor menu indicator Preparation Connecting to a Power source Using the batteries Battery condition indicator Using the AC power adapter Using the Digim
Contents MENU button 63 THUMBNAIL / ZOOM W button 64 ZOOM T button 65 5-function button 66 UP button 67 PLAY/STOP/DOWN button 67 LEFT button 67 RIGHT button 68 OK button 68 Setting up the play back function using the LCD monitor 69 SLIDE SHOW 69 PROTECT 70 DELETE ALL 71 LCD BRIGHTNESS 72 COPY TO CARD 73 DPOF (Digital Print Order Format) 75 SETUP mode 76 Starting the SETUP mode 76 BEEP 76 FORMAT 77 POWER OFF 78 RESET 79 DATE IMPRINT 80 DATE TYPE 81 DATE SETUP 82 VIDEO OUT 83 LANGUAGE 85 PC mode 86 Starting
Getting to know your camera Thank you for buying a Samsung Digital Camera. Prior to using this camera, please read the user manual thoroughly. Keep the manual in a safe place. About the symbols This manual contains instructions on using this camera that will help you to use this camera safely and correctly. This will help prevent danger and injury to others. DANGER DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
Safety note Do not attempt to modify this camera in any way. This may result in fire, injury, electric shock or severe damage to you or your camera. Internal inspection, maintenance and repairs should be carried out by your dealer or Samsung Camera Service Center. Please do not use this product in close proximity to flammable or explosive gases, as this could increase the risk of explosion. Should any form of liquid or a foreign object enter the camera, do not use it.
Safety note WARNING Do not use the flash in close proximity to people or animals. Positioning the flash too close to your subject’s eyes, may cause eyesight damage. When taking photographs, never point the lens of the camera directly into very strong light. This may result in permanent damage to the camera or your eyesight. For safety reasons keep this product and accessories out of reach of children or animals to prevent accidents e.g.: Swallowing batteries or small camera accessories.
Safety note Leaking, overheating, or burst batteries could result in fire or injury. Use batteries with the correct specification for the camera. Do not short circuit, heat or dispose of batteries in fire. Do not use old batteries with new ones, or mix brands of batteries. Ensure the batteries are positioned correctly with regard to polarity (+ / -). When the camera is not in use for long periods, always unplug the camera from its power source.
This digital camera can be used for Viewing images on TV (refer to page 83) Printing images using a dedicated printer, DPOF-compatible printer or DPOF-equipped photo lab. (refer to page 75) Taking a picture. (refer to page 35 ~ 57) Downloading image files from camera to computer.
This digital camera can be used for READY Creation of a digital photo album Inserting images directly into any electronic document Taking a self-portrait and using the image to personalize name cards You can even create your own unique gift-wrap paper by using your digital images 11
Manufacturer’s contents Please check that you have the correct contents before using this product. marked contents are optional. Digital camera 2 AA Alkaline Batteries Pouch Video cable USB cable Camera strap User manual Product warranty Applications S/WDriver CD-ROM SD memory card Battery pack (SBP-3603) AC Adapter (3.3V) Battery charger SAMSUNG Ni-MH Battery Pack : SNB-2012 KIT 2 AA Ni-MH AC adapter(3.
Identification of features READY Product Exterior(Front / Top / Side) Mode dial lamp Power switch Shutter button Mode dial Flash Viewfinder Self-timer lamp Lens DC input connection point Battery chamber cover/ Memory card cover USB connection terminal Memory card slot Battery chamber Video connection terminal 13
Identification of features Product Exterior (Back) MACRO/ DELETE button(p.62) MENU button (p.40) LCD button (p.39) Autofocus indicator (Green) lamp Zoom(W) / Thumbnail button(p.41) Zoom(T) / Digital zoom button(p.41) Viewfinder Strap eyelet Flash indicator(Red) lamp 5-function button LCD monitor Tripod socket UP( ) button (p.43) FLASH/ LEFT( ) button (p.43) SELF-TIMER/ RIGHT( (p.46) OK button (p.47) PLAY/STOP/ DOWN( ) button (p.
Identification of features READY Viewfinder/ AF indicator lamp/ Flash indicator lamp Autofocus indicator lamp(Green) Optimum picture area over 1.
Identification of features INFORMATION Self-timer lamp Color Status Camera condition For the first seven seconds, the LED blinks slowly. Blinking Red For the final three seconds, the LED blinks quickly. Blinking once When the shutter button is released after being pressed. Beep Beep sound Time Camera condition When the camera power is turned on/off.
Identification of features READY LCD monitor indicator The LCD monitor displays information about the shooting conditions. Recording mode Image & Full Status No. Description Icons Page 1 Recording mode p.35/36 2 Battery p.27 3 Camera shake warning p.37/44 4 Flash p.44 5 Macro indicator p.47 6 Self-timer p.46 7 White balance 8 Exposure compensation 9 Digital zoom( Large image size) 10 11 p.54 +0.5 EV (Exposure Value) p.
Identification of features No. Description Icons Page 12 Quality p.50 13 Memory card indicator p.30 14 Time 13:00 15 Date 2003/01/10 Play mode No. 18 Still image & Full Status Movie clip & Full Status Description Icons Page 1 Battery p.27 2 Protect indicator p.70 3 DPOF indicator p.74 4 Digital zoom indicator p.55 5 Digital zoom magnification rate indicator p.65 6 Number of stored images 7 Memory card indicator p.30 8 Movie clip indicator p.
Identification of features You can select the desired working mode by using the mode dial located on the top of the camera. This digital camera has 4 working modes. These are listed below MOVIE CLIP mode ( ) This mode is used for movie clips. The flash is changed to FLASH OFF when this mode is selected. STILL IMAGE mode ( ) This mode is used for still image shots Normal : 0.8m ~ infinity Macro : Wide - 0.1m ~ 0.8m Tele - 0.4m ~ 0.
Identification of features Selecting camera mode and menu You can select a camera mode or a camera mode menu by pressing the MODE dial or MENU button as below.
Identification of features READY LCD monitor menu indicator Each mode has a menu as shown below. * marked sub menu is the default setting. Camera mode MOVIE CLIP ( Main menu Sub menu ) WHITE BALANCE AUTO* (p.53) DAYLIGHT CLOUDY SUNSET TUNGSTEN FLUORESCENT LCD BRIGHTNESS -5~0*~+5 (p.
Identification of features Camera mode Main menu STILL IMAGE 1/2 ( Sub menu ) IMAGE SIZE 1600x1200* (p.49) 800x600 QUALITY SUPER FINE (p.50) FINE* NORMAL EXPOSURE WHITE BALANCE -2.0 ~ 0.0* ~ +2.0EV (0.5 EV steps) AUTO* DAYLIGHT CLOUDY SUNSET TUNGSTEN FLUORESCENT 22 (p.54) (p.
Identification of features Main menu STILL IMAGE 2/2 ( READY Camera mode Sub menu ) QUICK VIEW OFF (p.56) ON* LCD BRIGHTNESS PLAY 1/2 ( -5~0*~+5 (p.57) ) SLIDE SHOW PROTECT 1,3*,5,7,9 SEC ONE IMAGE* ALL IMAGES DELETE ALL NO* (p.69) UNLOCK* (p.70) LOCK (p.70) UNLOCK* (p.70) LOCK (p.70) (p.71) YES LCD BRIGHTNESS -5~0*~+5 (p.
Identification of features Camera mode PLAY 2/2 ( Main menu Sub menu ) COPY TO CARD (p.73) NO* YES DPOF SETUP 1/3 ( # OF PRINTS 0~9 (p.75) ) BEEP ON* (p.76) OFF FORMAT NO* (p.77) YES POWER OFF RESET 3MIN*/5MIN/10MIN/30MIN/CANCEL NO* YES 24 (p.79) (p.
Identification of features SETUP 2/3 ( Main menu READY Camera mode Sub menu ) DATE IMPRINT ON * (p.80) OFF DATE TYPE Y/M/D* (p.81) D/M/Y M/D/Y DATE SETUP VIDEO OUT 2000/01/01~2058/12/31 NTSC (p.82) (p.
Identification of features Camera mode SETUP 3/3 ( Main menu Sub menu ) LANGUAGE ENGLISH (p.85) FRANÇAIS DEUTSCH ESPAÑOL ITALIANO INFORMATION There is no associated menu in PC mode and the LCD monitor is always turned off in PC mode.
Preparation There are two ways in which to provide the camera with power. You can use batteries(AA Alkaline, NiMH, CR-V3), or alternatively, you can use an AC(100V ~ 250V) Adapter (DC 3.3V 2.0A). Using the batteries 1. Open the battery chamber cover by pushing in the direction of the arrow. 2. Insert the batteries taking note of the polarity (+ / -). 3. To close the battery chamber cover, push it until it clicks.
Preparation INFORMATION The date & time setting menu will be displayed on the LCD monitor in the following circumstances: Check the date & time. If the date & time are incorrect, change them before taking a picture. When the camera is used for the first time. Even if the batteries or AC adapter are removed, it is necessary to reset the time /date. This camera will automatically switch off when not in use for a period of time. Refer to [POWER OFF] function(p.78).
Preparation READY Using the AC power adapter If you have access to a mains supply, using an AC Adapter allows the camera to be used for long periods of time. If you connect the camera to a computer, it is advisable to use an AC adapter, as this will enable extended use. Plug the adapter into the connection point (DC IN 3.3V) on the camera. DANGER Always turn off the power before taking the AC adapter out of the mains supply. As with all mains powered devices, safety is important.
Preparation Inserting the memory card The camera comes with 8MB of internal flash memory, allowing you to store images and movie clips in the camera. However, you can expand the memory capacity by using an optional memory card so that you can store more images and movie clips. 1. Turn off the camera power and pull the memory card cover in the direction of the arrow to open. 2. Insert the memory card all the way into the memory card slot.
Preparation Card pins Write protect switch Label SD(Secure Digital) memory card 31 READY The SD memory card has a write protect switch that prevents image files from being deleted or formatted. By sliding the switch to the bottom of the memory card, the data will be protected. By sliding the switch to the top of the memory card, the data protection will be canceled. Check the switch position before taking an image.
Preparation Removing the memory card 1. Turn the power off using the power switch. 2. Open the memory card cover and press the memory card as shown in the image and release. 3. Remove the memory card and close the memory card cover. NOTICE Don’t remove the memory card when the AF lamp(Green) is illuminated as this may cause damage to data in the memory card. Instructions on how to use the memory card Using a new memory card for the first time Before using the memory card, it must be initialized.
Preparation When using the internal memory, the specified shooting capacity will be as follows. (These figures are intended as an indication of expected performance) Number of shots Recorded image size Recorded image quality Internal Memory 8MB 1600X1200 (Large) 800 X 600 (Small) Super Fine 10 Fine 15 Normal 20 Super Fine 30 Fine 45 Normal 60 These figures are approximate as image capacities can be affected by variables such as memory performance and subject matter.
Preparation Preserving the memory card data If the memory card is subjected to any of the following, the recorded data may become corrupted : - When the CARD is used incorrectly. - If the power is switched off or the CARD is removed while recording, deleting(formatting) or reading. Samsung cannot be held responsible for lost data. It is advisable to copy important data onto other media as back-up e.g. floppy disks, hard disks, CD etc.
Recording mode Starting Recording Mode If the CARD is inserted in the camera, all the camera functions are applied only to the CARD. If the CARD is not inserted in the camera, all the camera functions are applied only to the internal memory. Recording a Movie clip MOVIE CLIP mode 6. The MOVIE CLIP mode icon and available recording time will display on the LCD monitor. (max. 3min) 35 ADVANCED 1. Insert the batteries(p.27). Insert the batteries taking note of the polarity (+ / -). 2. Insert the CARD(p.
Recording mode 7. Point the camera towards the subject and compose the shot by using the viewfinder or LCD monitor. Press the shutter button and movie clips are recorded for as long as the available recording time. Movie clips will still be recorded if the shutter button is released. The movie clip icon will blink during the recording process. If you wish to stop recording, press the shutter button again. Image size and type are listed below. - Image size : QVGA (320 x 240) - File type : *.
Recording mode INFORMATION Under the following conditions, the date/time setting menu may be displayed. If the date/time is incorrect, reset the date/time before taking a picture. (p.82) - When you use this camera for the first time. - Whenever the AC adapter and batteries are removed. NOTICE ADVANCED Under certain conditions the auto focus system may not perform as expected. - When photographing a subject that has little contrast. - If the subject is highly reflective or shiny.
Recording mode Using the camera button to adjust the camera The STILL IMAGE/MOVIE CLIP mode function can be set up by using the camera button. POWER switch Used for turning the camera power on / off. If this camera isn t operated during the specified time(about 60 SEC.), the camera power will be idle(LCD monitor : Off, Mode dial lamp : Blinking ) automatically. To use the camera again, press any of the camera buttons except the power switch.
Recording mode LCD button Pressing the LCD button in the RECORDING(STILL IMAGE, MOVIE CLIP) mode will change the display as shown below.
Recording mode MENU button When you press the MENU button, a menu related to each camera mode will be displayed on the LCD monitor. Pressing it again will return the LCD to the initial display. STILL IMAGE 1/2 Pressing the MENU button IMAGE SIZE QUALITY EXPOSURE 0.0 WHITE BALANCE EXIT:MENU MENU off AUTO PAGE: MENU on A menu option can be displayed when the following are selected : STILL IMAGE mode, MOVIE CLIP mode, PLAY mode and SETUP mode. There is no menu available when the PC mode is selected.
Recording mode ZOOM (W/T) button Used for digital or optical zooming in / out (STILL IMAGE mode) This camera has a 3X optical zoom and a 2X digital zoom function. Using both will offer a total zoom ratio of 6X. When you press the zoom (W/T) button, the zoom bar will display in the upper left of the LCD monitor. Optical Zoom ADVANCED Zoom TELE Press zoom button T. This will zoom into the subject i.e. the subject will appear nearer. Zoom WIDE Press zoom button W. This will zoom out from the subject i.e.
Recording mode NOTICE The digital zoom cannot be used in the MOVIE CLIP mode. The digital zoom only applies to the LARGE(1600X1200) image size. An image that is taken by using the digital zoom is stored as an 800x600 image size. The digital zoom function doesn’t apply to a SMALL(800 X 600) image size.
Recording mode UP( ) button When the menu is displayed on the LCD monitor, pressing the UP( ) button makes the menu cursor move up. DOWN( ) button When the menu is displayed on the LCD monitor, pressing the DOWN( ) button makes the menu cursor move down. When the menu is displayed on the LCD monitor, pressing the LEFT( ) button makes the menu cursor move to the main menu. When the menu is not displayed on the LCD monitor, the LEFT ( ) button operates as the FLASH button( ).
Recording mode Flash mode indicator FLASH MODE Auto flash Indicator Definition If the subject or background is dark, the camera flash will operate automatically. If a subject or background is dark, the camera flash will work automatically and will reduce the red-eye effect by using the redeye reduction function. Auto & Red eye reduction Slow synchro When you take an image at night, a slow shutter speed results in the background and the subject being bright. We recommend using a tripod.
Recording mode NOTICE Using the flash frequently will reduce the life of the batteries. Under normal operating conditions the charging time for the flash is normally within 10 seconds. If the batteries are weak, the charging time will be longer. Take photographs within the flash range. ADVANCED The flash range The flash ranges are listed below - WIDE(W) : 0.5m ~ 2.5m - TELE(T) : 0.5m ~1.8m In the macro mode, the flash is turned to Flash off automatically.
Recording mode SELF-TIMER( )/ RIGHT( ) button When the menu is displayed on the LCD monitor, pressing the RIGHT( ) button makes the menu cursor move to sub menu. When the menu is not displayed on the LCD monitor, the RIGHT( ) button operates as the SELF-TIMER button( ) in RECORDING(STILL IMAGE/ MOVIE) mode. This function is used when the photographer would also like to be in the picture. Selecting the self-timer The self-timer activates only in RECORDING (STILL IMAGE/ MOVIE CLIP) mode.
Recording mode OK button When the menu is displayed on the LCD monitor, the OK button is used for confirming data that is changed by using the / / / buttons. MACRO( ) button Used for macro shots ADVANCED Selecting the Macro focus 1. Turn the camera power on. 2. Select the STILL IMAGE mode by rotating the mode dial. 3. Press the Macro button and the Macro indicator will be displayed on the LCD monitor( ). 4.
Recording mode Using the LCD monitor to adjust the camera Recording functions can be changed by using the LCD monitor. In the RECORDING (STILL IMAGE/MOVIE CLIP) mode, pressing the MENU button displays the menu on the LCD monitor. The following functions are available, depending on the mode you have selected (STILL IMAGE, MOVIE CLIP ). Mode STILL IMAGE mode MOVIE CLIP mode PAGE IMAGE SIZE O X p.49 IMAGE QUALITY O X p.50 EV COMPENSATION O X p.52 WHITE BALANCE O O p.53 QUICK VIEW O X p.
Recording mode IMAGE SIZE In the STILL IMAGE mode, you can select the image size. A large image uses more memory, so increasing image size will reduce the total number of shots you can store on a memory. The image sizes are listed below. 1600X1200 800X600 ADVANCED Selecting the image size 1. Turn the camera power on. 2. Select the STILL IMAGE mode by rotating the mode dial. 3. Do not turn the LCD monitor off. 4. Press the MENU button to display the menu on the LCD monitor. 5.
Recording mode IMAGE QUALITY In the STILL IMAGE mode, you can select the image quality. (Data compression rate) The higher the QUALITY setting, the better the final image will be. However, the high quality setting will require more memory and therefore reduce the number of images you can store on the memory. SUPER FINE is the highest quality and NORMAL is the lowest setting. Choose the setting appropriate for your needs. The image qualities are listed below.
Recording mode NOTICE The image file is stored in *.jpg. This file format complies with DCF(Design rule for Camera File system) JPEG 51 ADVANCED JPEG [Joint Photographic Experts Group] : The name of the committee that designed the standard image compression algorithm. The JPG file format is designed for compressing digital images without harmful influence to the original image. It is the most common type of compressed image file format used in the world wide web.
Recording mode EV COMPENSATION This camera automatically adjusts the exposure according to the ambient lighting conditions. However, you can select the exposure value by using the [EXPOSURE] sub menu. In the STILL IMAGE mode, you can select the exposure value. If you increase the exposure value, the image will be brighter. If you decrease the exposure value, the image will be darker. Selecting the exposure value 1. Turn the camera power on. 2. Select the STILL IMAGE mode by rotating the mode dial. 3.
Recording mode NOTICE Exposure compensation setting range : -2.0 ~ +2.0 EV (0.5 EV steps) This change to the exposure will remain until the camera is switched off. When the camera is turned on again, the exposure compensation setting returns to 0.0EV (discarding the exposure compensation). When you have selected a change in exposure value, the value is displayed on the LCD. Decreasing or increasing the exposure value may lead to images being under or over exposed (too dark or too bright).
Recording mode 5. Press the UP( )/ DOWN( ) button and select [WHITE BALANCE]. 6. Press the RIGHT( ) button and the sub menu will display. 7. Press the UP( )/ DOWN( ) button and select the desired white balance sub menu. 8. Press the OK button to confirm the setting. The default is [AUTO]. 9. Press the MENU button to cancel the menu display.
Recording mode DIGITAL ZOOM Using the Digital zoom 1. Select the maximum(3X) optical zoom by pressing the ZOOM T button. 2. Press the ZOOM T button and the digital zoom will be activated. Pressing the ZOOM T button ADVANCED Pressing the ZOOM W button A normal image Digital zoom image INFORMATION To use the digital zoom the LCD monitor has to be turned on. Images taken using the digital zoom may take a little longer for the camera to process. Allow time for this to take place.
Recording mode QUICK VIEW In STILL IMAGE mode, you can select the quick view menu. You can briefly review the last image captured. Selecting the quick view function 1. Turn the camera power on. 2. Select the STILL IMAGE mode by rotating the mode dial. 3. Do not turn the LCD monitor off. 4. Press the MENU button to display [STILL IMAGE 1/2] menu on the LCD monitor. 5. Select [STILL IMAGE 2/2] menu by pressing the RIGHT( ) button. 6. Press the UP( )/ DOWN( ) button and select [QUICK VIEW]. 7.
Recording mode LCD BRIGHTNESS In STILL IMAGE/MOVIE CLIP mode, you can select the LCD brightness. You may adjust the LCD brightness. Brightness range : -5 ~ 0 ~ +5 Selecting the LCD brightness STILL IMAGE 2/2 QUICK VIEW ON LCD BRIGHTNESS EXIT:MENU 0 ADVANCED 1. Turn the camera power on. 2. Select the MOVIE CLIP/STILL IMAGE mode by rotating the mode dial. 3. Do not turn the LCD monitor off. 4. Press the MENU button in the STILL IMAGE mode to display [STILL IMAGE 1/2] menu on the LCD monitor. 5.
Play mode Starting Play Mode Turn the camera on and select the PLAY mode by rotating the MODE dial. The camera can now play back the images stored on a memory. You can set up the PLAY mode function by using the camera buttons and LCD monitor. Playing back a still image 1. Slide the power switch to turn on the camera. 2. Select the PLAY mode by rotating the mode dial. 3. The last image stored on the memory is displayed on the LCD monitor. 4.
Play mode Playing back a movie clip Steps from 1-3 are the same as those to play back a still image. ADVANCED 4. Select the movie clip that you want to play back by using the LEFT( )/RIGHT( ) button. If you select a movie clip file, the movie clip indicator( ) will be displayed on the LCD monitor. 5. Press the OK button or PLAY/STOP/DOWN button to play back a movie clip - To pause playing back a movie clip, press the PLAY/STOP/ DOWN( ) button again.
Play mode NOTICE If there are no images stored on the internal memory or the memory card, a [NO IMAGE !] message will be displayed on the LCD monitor. INFORMATION If the memory card is inserted in the camera, all the camera functions are applied only to the CARD. If the CARD is not inserted in the camera, all the camera functions are applied only to the internal memory. The last image stored on the internal memory will be displayed on the LCD monitor.
Play mode Setting up the play back function by using the camera button You can set up the PLAY mode function by using the camera buttons. Power switch LCD button Pressing the LCD button in the PLAY mode will change the display as shown below.
Play mode DELETE button This deletes an image stored on the internal memory or memory card. Deleting an image A protected image can t be deleted. 1. Turn the camera power on. 2. Select the PLAY mode( ) by rotating the mode dial. 3. Select an image that you want to delete by pressing the DELETE IMAGE? LEFT( )/ RIGHT( ) button. 4. Press the DELETE button( ) and a message will display YES NO as shown alongside on the LCD. 5. Select [NO] or [YES] by pressing the LEFT( ) / RIGHT( ) button. 6.
Play mode MENU button When you press the MENU button, the PLAY mode menu will be displayed on the LCD monitor. Pressing it again will return the LCD to the initial display.
Play mode THUMBNAIL / ZOOM W button You can view up to 9 images at a time by using the THUMBNAIL function. Thumbnail display 1. Turn the camera power on. 2. Select the PLAY mode by rotating the mode dial. 3. An image will be displayed on the LCD monitor. 4. Press the THUMBNAIL( ) button in the PLAY mode. 9-images will be displayed at the same time on the LCD monitor. The thumbnail display will highlight the image that had been showing at the time the thumbnail mode was selected.
Play mode ZOOM T button When viewing a single image in PLAY mode, use the ZOOM T button to enlarge the selected image. Image enlargement ADVANCED 1. Turn the camera power on. 2. Select PLAY mode( ) by pressing the MODE button. 3. Select a image that you want to enlarge by pressing the LEFT/ RIGHT button. 4. Press the Zoom T button and 2X enlarged image will display. 5. Different parts of the image can be viewed by pressing the / / / buttons. 6.
Play mode 5-function button Explanation of the 5-function button BUTTON MENU DISPLAY ON UP( ) button OFF ON DOWN( ) button PLAY mode Makes the menu cursor move up Moves upwards to select a previously stored image (Thumbnail display) p.67 Moves to the upper part of the image (Digital zoom) Makes the menu cursor move down Playing back/ Pause a movie clip and slide show OFF Page Moves downwards to select a later stored image (Thumbnail display) p.
Play mode UP( ) button When the menu is displayed on the LCD monitor, pressing the UP( ) button makes the menu cursor move up. When the menu is not displayed on the LCD monitor, pressing the UP( ) button activates the following. - Thumbnail display : Moves upwards to select a previously stored - Digital zoom : Moves to the upper part of the image ADVANCED PLAY/STOP/DOWN( ) button When the menu is displayed on the LCD monitor, pressing the DOWN( ) button makes the menu cursor move down.
Play mode RIGHT( ) button When the menu is displayed on the LCD monitor, the RIGHT ( ) button makes the sub menu data change. When the menu is not displayed on the LCD monitor, pressing the RIGHT( ) button activates the following.
Play mode Setting up the play back function using the LCD monitor PLAY mode functions can be changed by using the LCD monitor. In the PLAY mode, pressing the MENU button displays the menu on the LCD monitor. SLIDE SHOW Images can be displayed continuously at pre-set intervals. This is useful and convenient for checking recorded images and for presentations. You can select the slide show play back time (1sec/ 3sec/ 5sec/ 7sec/ 9sec) ADVANCED Starting the slide show 1. Turn the camera power on. 2.
Play mode PROTECT This is used to protect specific shots from being accidentally erased (LOCK). It also releases images that have been previously protected (UNLOCK). Protecting images 1. Turn the camera power on. 2. Press the MODE button to select the PLAY mode( ). 3. Do not turn the LCD monitor off. 4. Select an image that you want to protect by pressing the LEFT( )/ RIGHT( ) button. 5. Press the MENU button to display the PLAY mode menu on the LCD monitor. 6.
Play mode NOTICE An image in LOCK mode will be protected from [DELETE] or [DELETE ALL] functions, but will NOT be protected from the [FORMAT] function. DELETE ALL Deleting all images Deleting all images 1. Turn the camera power on. 2. Select the PLAY mode( ) by rotating the mode dial. 3. Do not turn the LCD monitor off. 4. Press the MENU button to display the PLAY mode menu on the LCD monitor. 5. Press UP( ) /DOWN( ) button and select [DELETE ALL]. 6.
Play mode NOTICE Remember that this will permanently delete unprotected images. Important shots should be stored on a computer before deletion takes place. LCD BRIGHTNESS You may adjust the LCD brightness. Brightness range : -5 ~ 0 ~ +5 Selecting the LCD brightness 1. Turn the camera power on. 2. Select the PLAY mode( ) by rotating the mode dial. 3. Do not turn the LCD monitor off. 4. Press the MENU button to display the PLAY mode menu on the LCD monitor. 5.
Play mode COPY TO CARD This enables you to copy image files to the CARD. Copying image files to the memory card 73 ADVANCED 1. Insert a memory card. PLAY 2/2 2. Turn the camera power on. COPY TO CARD 3. Select the PLAY mode( ) by rotating the mode dial. DPOF 4. Do not turn the LCD monitor off. 5. Press the MENU button to display [PLAY 1/2] menu on the LCD monitor. 6. Select [PLAY 2/2] menu by pressing the RIGHT( ) button. EXIT:MENU CHANGE: 7. Press the UP( )/ DOWN( ) button and select [COPY TO CARD].
Play mode INFORMATION If you select this menu and press the OK button without inserting the memory card, a [NO CARD !] message will display. If the memory card capacity is smaller than the internal memory, a [CARD FULL !] message will be displayed by rotating the mode dial to the RECORDING mode. The rest of the image files that stored on the internal memory will not be copied. Before doing [COPY TO CARD], delete unnecessary files.
Play mode DPOF (Digital Print Order Format) DPOF(Digital Print Order Format) allows you to embed printing information on your memory card. Select the pictures to be printed and how many prints to make. Images can then be printed on DPOF printers, or at an increasing number of photo laboratories. This function is not available for Movie clips. The DPOF file is only stored on the memory card. To make a DPOF file for the images that are stored on the internal memory, apply the [COPY TO CARD] function first.
Setup mode Starting the SETUP mode Rotate the mode dial to the SETUP mode, allowing you to set up the basic camera settings. BEEP A beep will sound when you press the camera button and you can check the camera conditions. Selecting the beep sound 1. Turn the camera power on. 2. Select the SETUP mode( ) by rotating the mode dial. 3. [SETUP 1/3] menu will display. 4. Select [BEEP] by pressing the UP( )/ DOWN( ) button. 5. Press the RIGHT( ) button and the sub menu will display. 6.
Setup mode Remove the memory card to format the internal memory. Insert the memory card to format the memory card. This is used for formatting the internal memory / SD memory card. All the files in the memory are deleted by [FORMAT] function. Formatting the memory SETUP 1/3 BEEP ON ADVANCED 1. Turn the camera power on. 2. Select the SETUP mode( ) by rotating the mode dial. 3. [SETUP 1/3] menu will display. 4. Select [FORMAT] by pressing the UP( ) / DOWN( ) button and press the RIGHT( )button. 5.
Setup mode POWER OFF This function switches the camera off after a set amount of time in order to prevent unnecessary battery drainage. You can set the power to switch off at any specified time( 3, 5, 10, 30MIN) from the last operation. If you select [CANCEL], the power off function will not operate. Note that the automatic power off does not operate if the camera is in slide show or PC mode. Selecting the power off function 1. Turn the camera power on. 2.
Setup mode RESET This menu allows you to reset the camera settings to the default. Selecting the default camera setting SETUP 1/3 BEEP ON FORMAT POWER OFF 3 MIN RESET ADVANCED 1. Turn the camera power on. 2. Select the SETUP mode( ) by rotating the mode dial. 3. [SETUP 1/3] menu will display. 4. Press the UP( )/ DOWN( ) button and select [RESET]. 5. Press the RIGHT( ) button and the sub menu will display. 6. Select [YES] or [NO] by pressing the UP( )/ DOWN( ) button and press the OK button.
Setup mode DATE IMPRINT There is an option to include DATE/TIME on still images. Selecting the date imprint function 1. Turn the camera power on. 2. Select the SETUP mode( ) by rotating the mode dial. 3. [SETUP 1/3] menu will display. 4. Select [SETUP 2/3] menu by pressing the RIGHT( ) button. 5. Press the UP( )/ DOWN( ) button and select [DATE IMPRINT]. 6. Press the RIGHT( ) button and the sub menu will display. 7. Select [ON] or [OFF] by pressing the UP( )/ DOWN( ) button.
Setup mode DATE TYPE You can select the date format that is imprinted on the image. - Y/M/D : year /month/ day - M/D/Y : month/ day /year - D/M/Y : day /month /year Selecting the date format SETUP DATE IMPRINT DATE TYPE 2/3 ADVANCED 1. Turn the camera power on. 2. Select the SETUP mode( ) by rotating the mode dial. 3. [SETUP 1/3] menu will display. 4. Select [SETUP 2/3] menu by pressing the RIGHT( ) button. 5. Press the UP( )/ DOWN( ) button and select [DATE TYPE]. 6.
Setup mode DATE SETUP You can change the imprinted date/time Changing the date/time 1. Turn the camera power on. 2. Select the SETUP mode( ) by rotating the mode dial. 3. [SETUP 1/3] menu will display. 4. Select [SETUP 2/3] menu by pressing the RIGHT( ) button. 5. Press the UP( )/ DOWN( ) button and select [DATE SETUP]. 6. Press the RIGHT( ) button and the sub menu will display. You can change the date/time on the LCD monitor display by pressing the UP( )/ DOWN( )/ LEFT( )/ RIGHT( ) button.
Setup mode VIDEO OUT The Movie output signal from the camera can be NTSC or PAL. Your choice of output will be governed by the type of machine (monitor or TV, etc.) to which the camera is connected. Select the correct movie standard for the outer monitor. PAL mode can support only BDGHI. Selecting the video out type SETUP DATE IMPRINT DATE TYPE 2/3 ADVANCED 1. Turn the camera power on. 2. Select the SETUP mode( ) by rotating the mode dial. 3. [SETUP 1/3] menu will display. 4.
Setup mode Connecting to an external monitor In STILL IMAGE/ MOVIE CLIP/ PLAY mode, you can view the stored still images or movie clips by connecting the camera to an external monitor via the video cable. When the camera is connected to an external monitor, the LCD monitor will be turned off automatically. When the camera is connected to an external monitor, the menu will be visible on the external monitor and the menu functions are the same as those indicated on the LCD monitor.
Setup mode LANGUAGE There is a choice of languages that can be displayed on the LCD monitor. You can select English/ Korean/ German/ French/ Spanish/ Italian/ Taiwanese/ Chinese. Selecting a language SETUP 3/3 LANGUAGE ADVANCED 1. Turn the camera power on. 2. Select the SETUP mode( ) by rotating the mode dial. 3. [SETUP 1/3] menu will display. 4. Select [SETUP 3/3] menu by pressing the RIGHT( ) button twice. 5. Press the UP( )/ DOWN( ) button and select [LANGUAGE]. 6.
PC mode Starting PC mode If you insert the USB cable to a USB connection terminal, the camera working mode will change to the PC mode automatically. In this mode, you can download stored images to your PC through the USB cable. There is no associated menu in PC mode and the LCD monitor is always turned off in PC mode. The AF indicator lamp blinks when the files are transferring via the USB connection. Connecting the camera to PC 1. Turn the camera power on. 2. Turn the PC power on. 3.
PC mode Downloading stored images Once you have downloaded images to your PC, they can be edited and printed. 1. Connect the camera to your PC with the USB cable. (p.86) ADVANCED 2. On your computer s desktop display, select [My computer] and double click [Removable Disk DCIM 100SSCAM]. The image files will then be displayed. 3. Select an image and press the right mouse button. 4. A pop-up menu will open. Click [Cut] or [Copy] menu. [Cut] : cuts a selected file. [Copy] : copies files.
PC mode 5. Click a folder that you want to paste the file. 6. Press the right mouse button and a pop-up menu will open. Click [Paste]. 7. An image file is transferred from camera to your PC. - When the memory card is inserted, you can view the images are stored in the memory card. - When the memory card is not inserted, you can view the images are stored in the internal memory.
Important notes Caution! Sand can be particularly troublesome to cameras. Sand or other small particles can cause severe malfunctions. Ensure that there is no contact with sand or similar particles. Extremes in temperature may cause problems. If the camera is transferred from a cold to a warm and humid environment, condensation can form on the delicate electronic circuitry. If this occurs, turn the camera off and wait for at least 1 hour until all moisture is dispersed.
Important notes If the digital camera is not used for a long period, an electric discharge can occur. It is a good idea to remove the batteries and the CARD, the camera is not used for some time. If the camera is exposed to electronic interference, it will turn itself off to protect the CARD. Maintenance Use a soft brush (available from photo stores) to GENTLY clean the lens and LCD assemblies. If this does not work, lens-cleaning paper with lens cleaning fluid can be used.
Important notes Warning indicator There are several warnings that may appear in the LCD display Warning indicator Causes A memory card is not inserted. NO CARD ! MEMORY FULL ! MEMORY ERROR ! Insert a memory card and do [COPY TO CARD] Turn off the camera and turn it on again There are no images stored on the internal memory or the CARD. Take images. Insert a CARD that is holding some images. There is insufficient memory capacity to take an image.
Before contacting a service center Please check the following Symptom The camera doesn t switch on The camera power is down whilst in use Batteries drain quickly Causes Remedy There is low battery capacity An AC Power Adapter is not connected Insert fresh batteries Connect an AC Power Adapter The batteries are exhausted The Camera is turned off automatically due to the Auto power off function The Adapter plug is not connected securely Insert fresh batteries Slide the power switch to reactivate camer
Before contacting a service center Please check the following Symptom The camera buttons do not operate The memory card error Images are too bright The play back display is not very clear The Date is not displayed on the LCD monitor in PLAY mode When using the PC s explorer, emovable Disk] does not show Remedy Camera malfunction Remove /re-insert batteries and switch camera on Incorrect memory card format Re-format the memory card. (p.
Specifications Image Sensor Lens Viewfinder Focusing Shutter Exposure Flash White Balance Shooting Self-timer Storage 94 Type Effective Pixels Total Pixels 1/3.2" CCD Approx. 2.0 Mega pixels Approx. 2.1 Mega pixels Samsung SHD lens f=5.2 ~ 15.6mm Focal Length (35mm film equivalent : 39 ~ 117mm) F No. F 2.8 ~ F 4.8 Still Image mode : 2X (Large size only) Digital Zoom Play mode : 2X Optical Viewfinder Real image Optical Viewfinder LCD Monitor 1.6" color TFT LCD Type TTL autofocus Normal : 0.
Specifications Capacity (8MB) Image Play Interface Power Source Software Camera Driver Application System Requirements For Windows For Macintosh Digimax 240 PC with processor better than MMX Pentium 266MHz (XP : Pentium II 300MHz) Windows 98/98SE/2000/ME/XP Minimum 32MB RAM (XP : 128MB) 110MB of available hard-disk space USB port, CD-ROM drive 800X600 pixels, 16-bit color display compatible monitor (24-bit color display recommended) Power Mac G3 or later Mac OS 8.6 ~ 10.
Software manual Software Notes Please ensure that you read the instruction manual carefully before use. The attached software is a camera driver and image editing software tool for Windows. Under no circumstances should all or part of either the software or the user manual be reproduced. Copyright for both software is licensed only for use with a camera. In the unlikely event of a manufacturing fault, we will repair or exchange your camera.
Software manual About software After inserting the CD-ROM provided with this camera into the CD-ROM drive, the following window is automatically run. Before connecting the camera to the PC, you should first install the camera driver. NOTICE Disable other programs before installing the camera driver. Setting up the application program Access to the Samsung camera web-site. Driver and Application : for connecting the camera to the PC. All application programs (Digimax Viewer 1.
Software manual Image Viewer Digimax Viewer 1.0 : Program for viewing a stored image You can see the stored images in the memory directly on the PC monitor. And you can copy, move, delete the images and scale up /downscale the image sizes with Digimax Viewer. For windows only. Using Digimax Viewer (p.113) Application MGI PhotoSuite III SE : Image editing program Image editing program for downloaded images. For Windows only. Using MGI PhotoSuite III SE (p.
Software manual Setting up the application software 1. Click [Driver and Application] menu n the Autorun frame. 2. A [Welcome] window will open. Click the [Next>] button. 3. A [Start installation] window will open. Click the [Next>] button. If you select [Cancel] at the step 2, the camera driver installation will be cancelled and a window for installing Digimax Viewer 1.0 will be displayed.
Software manual 4. Installation is complete. Click the [Finish] button and the [Digimax Viewer 1.0] installation will be started. 5. The [Digimax Viewer 1.0] installation window will be displayed as shown alongside. Click [Next] button. 6. The Software License Agreement window will displayed. If you agree to it, click [Yes]. INFORMATION If you select [Cancel] at the step 5, the Digimax Viewer 1.0 installation will be cancelled and a window for installing MGI PhotoSuite III SE will be displayed.
Software manual 7. Select a destination folder and click [Next]. 8. Select the Program folder and click [Next]. 9. Installation is complete. Click [OK] button and the [MGI PhotoSuite III SE] installation will be started. NOTICE 10. The [Choose Setup Language] window will open. Select a language and click [OK] button.
Software manual INFORMATION If you select [Cancel] at the step 10, the MGI PhotoSuite III SE installation will be cancelled and a window for installing DirectX 8.1 will be displayed. Refer to camera user manual (p.114~128) for using the MGI PhotoSuite III SE. 11. A [Welcome] window will be displayed. Click [Next] to move to the next step. 12. The Software License Agreement window will be displayed. If you agree to this, click [Yes] button. 13. A [Setup Type] window will open.
Software manual 15. The MGI Registration window will be displayed. Click the [Continue] button. 16. The [Online Registration Utility] window will be displayed. Fill in the blanks and click the [Register] button. 17. Installation is complete. Click the [Finish] button. 18. [Windows MGI PhotoSuite Read it and close the window. ] window will open. SOFTWARE 19. All application programs are installed correctly. Check [Yes, I want to restart my computer now.] button and click [Finish] button.
Software manual NOTICE You must restart your computer after the installation, or your computer can t recognize the camera as a Removable disk. INFORMATION If you have ever installed the DirectX program in your computer, the following windows will open. 19. The [DirectX 8.1] installation window will be displayed as shown alongside. Click [OK] button. 20. All application programs are installed correctly. Click [OK] button and the computer will restart. 21.
Software manual 23. If you can see [Removable Disk] under [My computer], the camera driver installation is successful. Now you can transfer image files from the camera to PC via the USB cable. INFORMATION SOFTWARE If you have installed the camera driver, [Found New Hardware Wizard] may not open. After the [Found New Hardware Wizard] window opens, a window may open to select the camera driver file location. In this case, select [C:\WINDOWS\INF\OTHER] folder.
Software manual INFORMATION After installing the camera driver, you have to restart your PC. If you connect the camera to the PC before installing the camera driver, the [Found New Hardware Wizard] will open. In this case, cancel the [Found New Hardware Wizard] and disconnect the connection. Install the camera driver and connect the camera and PC again. Should the computer not find the camera driver after installation, please try one or more of the following measures. 1. Delete the camera driver (p.
Software manual Removing the USB Driver for Windows 98SE 1. Trace [Start Settings] and click [Control Panel] 2. Double-click [Add/Remove programs].
Software manual 3. The [Add/Remove Programs Properties] window will open. Click [Digimax 240 Mass Storage Driver] and click [Add/Remove] button. [Click!] 4. A window will open. Click [Next>] button. 5. Uninstall is complete. Click the [Finish] button and the window will disappear.
Software manual Removable Disk To use this camera as a Removable Disk, install(p.99~106) the USB Driver. 1. Before turning the camera power on, connect the camera to the PC with the USB cable. 2. Click [ Removable Disk ] under [My computer] or [ Windows Explorer]. 3. Image files stored in the Removable Disk(DCIM 100SSCAM) can be transferred to the PC.
Software manual Removing the removable disk Windows 98SE 1. Check whether the camera and PC are transferring a file. If the green camera status LED (next to viewfinder) blinks, you have to wait until the LED is off. 2. Unplug the USB cable. Windows 2000/ME/XP 1. Check whether the camera and PC are transferring a file. If the green camera status LED (next to viewfinder) blinks, you have to wait until the LED is off. 2. Double-click the [Unplug or Eject Hardware] icon on the task bar. [Double-click] 3.
Software manual 4. The [Stop a Hardware device] window will open. Select the [USB Mass Storage Device] and click the [OK] button. [Click!] 5. A [Safe to Remove Hardware] window will open. Click the [OK] button. [Click!] 6. A [Unplug or Eject Hardware] window will open. Click the [Close] button and the removable disk will be removed safely. SOFTWARE 7. Unplug the USB cable.
Software manual Setting up the USB Driver for MAC 1. A USB Driver for MAC is not included with the Application CD as MAC OS support the camera driver. 2. Check the MAC OS. You can check the MAC OS version during MAC OS start-up. This camera is compatible with MAC OS 8.6~10.2. 3. Connect the camera to the Macintosh and turn the camera power on in PC mode. 4. A new icon (Untitled) will be displayed on the desktop after connecting the camera to the MAC. Using the USB Driver for MAC 1.
Software manual Digimax Viewer This software is only compatible with Windows. To open Digimax Viewer, click the [ Start Programs Viewer 1.0 ] and Digimax Viewer 1.0 will then open. Samsung Digimax Viewer 1.0 Digimax Select an image and press the right mouse button. A pop-up menu will open. Open : allows you to view a selected sequence of images, one at a time. Copy : copies files. After copying a file, select a folder where you want to paste the copied file.
Software manual MGI PhotoSuite III SE This software is only compatible with Windows. To open MGI PhotoSuite lll SE, click the [Start Programs PhotoSuite lll SE] and MGI PhotoSuite lll SE will then open.
Software manual An introduction to the Welcome screen Get Get images. Prepare A number of photo editing activities can be performed within this module. Compose Use your photos in a variety of fun, creative and interesting ways. Organize Organize your photos and other media files into albums. SOFTWARE Share Save your results to show to others. Print Print hard copies of photos and projects.
Software manual Introduction to navigation bar Back Return to the previous step. Home Return to Welcome screen. Help Display help window. Get Get images. Prepare A number of photo editing activities can be performed within this module. Compose Use your photos in a variety of fun and interesting ways. Organize Organize your photos and other media files into albums. Share Save your results to show to others. Print Print hard copies of photos and projects. Browse Browse the web site.
Software manual GET To obtain images from the computer 1. To acquire images, Click the large [Get] button on the Welcome screen, or the [Get] button on the Navigation bar. Click [Computer] from the list of options displayed on the activity panel. 2. The Open file selector is displayed. Now select the image file and click [open]. SOFTWARE 3. The Welcome screen will change to the next work step, with the selected image displayed.
Software manual When you obtain images from the digital camera. Before transferring an image file, check the USB connection. 1. To acquire images, click the large [Get] button on the Welcome screen, or the [Get] button on the Navigation bar. Click [Computer] from the list of options displayed on the activity panel. 2. The Open file selector is displayed. Click [Look in :] to choose [Removable Disk( :)] and click [open] for the open file window to be displayed. 3. Select the [ DCIM 100SSCAM ] folder.
Software manual 4. The Welcome screen will change to the next work step, with the selected image displayed. NOTICE [Computer and Album Only] 119 SOFTWARE When you use the Digimax camera, only [Computer] and [Album] from the list of options displayed are available. You will be able to obtain images from the digital camera.
Software manual Acquiring images from an Album. 1. To acquire images, click the large [Get] button on the Welcome screen, or the [Get] button on the Navigation bar. Click [Album] from the list of options displayed on the activity panel. 2. After selecting Album on the [ Choose a photo album], click an image in the album and click [Open]. 3. The Welcome screen will change to the next work step, with the selected image displayed. Refer to page 124 for more information about creating an Album.
Software manual PREPARE When the image is loaded, the step changes to Prepare automatically. Menu of [PREPARE] steps Rotate & Crop You can rotate, flip or crop images along with a host of others. Touchup Remove Red eye, Remove Scratches etc.. are available in this menu. SOFTWARE Special Effects A number of special effects can be applied. Stitching Join a series of photos together to create a sweeping panoramic effect.
Software manual COMPOSE Add text, Compound Images etc. are available in this step. Menu of [COMPOSE] steps Collages : A collage consists of several photos or sections of photos arranged together on a common background. Photo Layouts : The Photo Layouts activity includes many collage and layout options. Cards & tags : Use your photos to create items such as Gift Tags, Greeting Cards, Invitations, Postcards, and Sports Cards.
Software manual ORGANIZE Organize your photos and other media files into albums. Menu of [ORGANIZE] steps [ [ [ SOFTWARE Choose a photo album to view or edit] Select Album : To create an Album, click [Organize] in the welcome screen or navigation bar. Album.. : Open Master Album. Select a photo, and choose an action below.] - Open : Open selected image. - Delete : Delete selected image. - Properties... : view image information. Choose an action to manage your album.
Software manual Creating an Album 1. To create an Album, click the large Organize button on the Welcome screen, or the Organize button on the Navigation bar. 2. Click [Album..] in [ Choose a photo album to view or edit.] 3. The Master Album window will be displayed, then click [New..]. 4. Put a new Album name in the New Album window and click [OK]. A new album will now be created. 5. [Master Album] window will open. Click [OK] button.
Software manual Add images to the album 1. Select [ Choose an action to manage your album. Add..] to add images to the album. [Click!] 2. Click [Computer] in Add Photos menu. [Click!] SOFTWARE NOTICE [Digital Camera(Direct)], [Scanner(TWAIN)], [Digital Camera(TWAIN)] sources can't be used.
Software manual 3. [Add photo to Album] window will open. Select images that you want to add. Click [Add] button. [Click!] 4. Adding images is complete.
Software manual SHARE Saving or sharing images. Menu of [SHARE] step Save To save the active file according to its current name and path. Save As To assign a new name or path to the file. Send E-mail e-mailing images. Slide Show Viewing images as a slide show.
Software manual PRINT You can print images. Menu for the [PRINT] step Print Printing images. Print Multiples Print multiple copies of a photo or project, or one copy of each of the photos included in an album, according to a predefined template. Choose a printer, an orientation, the print size, and the number of copies. You can then print the images. INFORMATION For more information, please refer to the Help file in [Help MGI PhotoSuite lll help].
FAQ About USB Please check the following if the USB connection malfunctions. [Case 1] The camera power is off. Turn the camera power on. We recommend using an AC power adapter in PC mode. If you use batteries, check the battery condition. [Case 2] USB Driver is not installed correctly. Install the USB Driver correctly. Refer to pages 99~106. [Case 3] The USB cable is not connected or you are using a cable with an incorrect specification. Use a USB cable with the correct specification.
FAQ About USB [Case 6] How do I know my computer supports a USB Interface? Check the USB port in your computer or keyboard. Check OS version. USB Interface is available in Windows 98, 98SE, 2000, ME .XP. Check [Universal serial bus controller] in Device Manager. Do the following to check [Universal serial bus controller].
MEMO SOFTWARE 131
SAMSUNG TECHWIN CO., LTD. OPTICS & DIGITAL IMAGING DIVISION 145-3, SANGDAEWON 1-DONG, JUNGWONGU,SUNGNAM-CITY, KYUNGKI-DO, KOREA 462-121 TEL : (82) 31-740-8086,8088, 8090, 8092, 8099 FAX : (82) 31-740-8398, 8111 SAMSUNG OPTO-ELECTRONICS AMERICA, INC. HEADQUARTERS 40 SEAVIEW DRIVE, SECAUCUS, NJ07094, U.S.A. TEL : (1) 201-902-0347 FAX : (1) 201-902-9342 WESTERN REGIONAL OFFICE 18600 BROADWICK ST., RANCHO DOMINGUEZ, CA 90220, U.S.A. TEL : (1) 310-537-7000 FAX : (1) 310-537-1566 SAMSUNG OPTO-ELECTRONICS UK LTD.
