Specifications

6–3
Configuring the Console Terminal
The console terminal should be set up with the following parameters:
!
Emulation: VT-100/ANSI Compatible
! B
ps: 9600
!
Stop bit: 1
!
Data bit: 8
!
Parity bit: None
!
Flow control: None
On a PC, the software download procedure employs the HyperTerminal feature in Windows. This
is described next.
Downloading Software Using Windows HyperTerminal
Setting Up HyperTerminal
1. Switch on the PC and boot with Windows
95 or later
.
2. Click [Start] at the bottom of the screen and select
Program
➔
➔➔
➔
Accessories
(in Windows 95) or
Program
➔
➔➔
➔
Accessories
➔
➔➔
➔
Communications
(in later Windows versions). Select
Hyper-
Terminal
from the displayed menu.
3. When you see the following HyperTerminal window, click the
Hypertrm
icon
4. When you see the following <Connection Description> window, type a name for the connection
in the “Name” box (e.g. 8BSI) and select an icon from the icons displayed in the “Icon” box.
Then, click [OK].
Hypertrm
icon