Specifications

5-10
Chapter 5
MMC Programming
MMC 744 MMC 744 :: DECT Registration On/Off DECT Registration On/Off
DDescriptionescription
Enables DECT handset registration on a DECT system. If this MMC is not executed and an attempt is made
to register a DECT handset, an error message will be displayed. A passcode is required to enable registration.
The default passcode can be changed using MMC 202 (Change Feature Passcodes).
Caution: When you have finished handset registration, run this MMC again and reset it to DISABLE to prev-
ent unauthorised registration.
PProgram keyrogram keyss
Volume Up/Down scroll through options
Keypad enter selections
Soft keys cursor left and right
SPEAKER store data and advance to the next MMC
HOLD clear previous entry
AAction/Displayction/Display
1. Press TRSF 744
Display shows
ENABLE DECT REG.
PASSCODE:
2.
Enter passcode
If the correct code is entered the display shows
An incorrect code entry shows
ENABLE DECT REG.
PASSCODE:[[[[
ENABLE DECT REG.
DISABLE
ENABLE DECT REG.
PASSCODE ERROR
If the System ID in MMC 737 (DECT System Code) has not
been set, the message shown will be displayed
ENABLE DECT REG.
NO REG. SYSTEM ID
3. Dial 1 for ENABLE or 0 for DISABLE
OR
Press Up or Down key to select and press RIGHT
soft key
ENABLE DECT REG.
ENABLE
4. Press TRSF to exit
OR
Press SPEAKER to store and advance to next MMC
DDefault Dataefault Data
DISABLE
RRelated MMCelated MMC
MMC 202 : CHANGE FEATURE PASSCODES