Specifications

3–7
DECT Survey Report Form
DECT Survey Report FormDECT Survey Report Form
DECT Survey Report Form
Number: Date:
From : [Survey Engineer]
To : [Customer Installation Engineer]
1. SITE
[full address of site]
2. Survey Engineers
[name and addresses of engineer(s) who executed the survey]
3. Outline description of site
[short description of site (dimensions, environment, number and type of buildings, etc)]
4. Number of handsets and expected traffic
[description of expected traffic and indication of above- or below-average traffic areas]
5. Test results
[this should include the site maps and any additional information that may be useful]
6. Connections–BSI to DBSs
[list of planned DBSs with approximate cable length and type, and whether existing
wiring can be used or new cabling is required]
7. Type and location of keyphone system
[description, location and system configuration]
8. Existing cabling
[indicate what cabling is available and how it is distributed across the site]
9. Base station installation
[for each DBS, indicate exactly where it can be installed, e.g. “in the corridor against
the wall of room 32, 2.5m high” and where customer restrictions apply as to where
DBSs may be installed]
10. Possible configurations
[list alternative configurations for the deployment of DBSs—refer to coverage maps
and indicate areas where coverage cannot be guaranteed]