Specifications

1-3
Programming
DCS-408 is self-configuring. This means that when the power is switched ON, the system
reads the types and locations of all installed cards and telephones and assigns default data
to them. This data provides for system operation within seconds after power is switched
ON. All trunks and stations are assigned according to the default numbering plan. This
numbering plan is flexible and may be changed to suit customer requirements. The
installing technician customizes these default data to meet the end user’s requirements.
The systems can be programmed from any LCD display keyset without interrupting
system operation. There are three levels of programming: technician (or system),
customer and station. The technician (system) level has access to all programs and can
allow the customer access to system programs as needed. Technician and customer access
is controlled by different security passcodes and access procedures.