Specifications

3-18
Chapter 3
Features
Station feature descriptions
Appointment Reminder
Keysets With an alarm key can be used like an alarm clock. When programmed for a
specific time, the keyset will sound a distinctive ring to remind you of meetings or
appointments. Alarms can be set for “today only” or for “every day” at the same time. Up
to two alarms may be set at each keyset. Display keysets can also show a programmed
message when the alarm rings.
Automatic Hold
Station users can enable or disable automatic hold at their keysets. While a user is engaged
on an outside (C.O.) call, pressing another trunk key, route key or CALL key automatically
puts the call on hold when this feature is enabled. Pressing TRSF, CONFERENCE, PAGE
or a DSS key will always automatically place the call on hold. This type of automatic hold is
not a user-selectable option.
Automatic Privacy
All conversations on outside lines and intercom calls are automatically private. The privacy
feature can be turned off on a per-line basis.
Background Music
When a customer-provided music source is connected, each keyset user may listen to
background music. The HOLD key turns background music on or off and the volume
control keys control the volume. One music source can be externally connected to the
system. Chime music is available by default.
Busy Station Callback
When reaching a busy station, callers may request a callback by pressing one key or dialing
a code. The system rings the caller back when that station becomes idle (a system-wide
maximum of 30 callbacks are allowed at one time, including busy station and busy trunk).
Busy Station Indications (BLF)
DSS/BLF keys may be assigned to any keyset. These keys will be oft when the station is
idle, light red when that station is in use and flash distinctively when that station is in DND
mode.