Specifications

3-12
Chapter 3
Features
Message Waiting Indications
When calling a station and receiving a busy signal or the no answer condition, the caller can
leave an indication that a message is waiting. The message key will flash red at the
messaged keyset. A single line phone will receive a distinctive message waiting dial tone.
Three message-waiting indications can be left at any station.
Microphone On/Off per Station
The microphone can be disabled at any keyset. When a microphone is disabled, the keyset
cannot use the speakerphone, although on-hook dialing and group listening is still possible.
Music On Hold-Flexible
Each C.O. line may be programmed to receive chimed music source, external sources,
internally-generated tones or no music when it is placed on hold. The system-generated
tone is a beep for every 10 seconds.
Night Service
The system provides separate ringing locations for all trunks in both the day and the night
modes.
y Automatic
Automatic night service allows the system to automatically go in and out of night service
according to the system clock. There are separate time options available for each day of the
week.
y Manual
The operator presses the NIGHT key and then dials a passcode to change day mode to night
mode operation.
y Holiday
There are 60 holiday tables. If it is a holiday, DCS-408 operates on night mode.
Operator Group
The station groups can contain 8 stations to answer incoming calls. Calls to this group can
be set for distributed, sequential or unconditional ringing. Operators can use the In/Out of
Group feature to meet flexible operator requirements. Default operator group is 50, but this
can be changed to 51~53.