Downloaded From camera-usermanual.
Instructions Getting to Know your camera Use this camera in the following order. Set up the camera driver Before connecting the camera to a PC, via the USB cable, you will need to set up the camera driver. Install the camera driver that is contained in Application software CD-ROM. (p.79) Take a picture Take a picture. (p.16) Insert the USB cable Insert the supplied USB cable into the PC’s USB port and the camera’s USB connection terminal. (p.81) Check the camera's power Check the camera’s power.
Danger Warning DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. Do not attempt to modify this camera in any way. To do so may result in fire, injury, electric shock or severe damage to you or your camera. internal inspection, maintenance and repairs should only be carried out by your dealer or Samsung Camera Service centre.
Caution CAUTION indicates a potentially hazardous situation which, if not avoided, may result in a minor or moderate injury. Leaking, overheating, or damaged battery could result in fire or injury. - Use battery with the correct specification for the camera. - Do not short circuit, heat or dispose of battery in fire. - Do not insert the battery with the polarities reversed. Remove the battery when not planning to use the camera for a long period of time.
Contents 021 022 022 022 022 024 025 026 027 028 030 031 032 032 033 033 034 034 035 035 036 036 037 Things to Watch Out for When Taking Pictures Using the camera buttons to set the camera POWER button SHUTTER button ZOOM W / T button Face Detection(FD) button Function Description / Info / Up button Macro / Down button Focus lock Flash / Left button Self-timer / Right button MENU / OK button E (Effect) button E (Effect) button : Colour Fn button How to use the Fn menu Size Quality / Frame rate Metering Sha
Contents 046 046 047 047 048 048 049 049 Formatting a memory Initialisation File name Imprinting the recording date Auto power off Selecting Video out type Auto Focus lamp Selecting a battery type PLAY 050 Starting play mode 50 050 050 051 051 051 052 052 052 054 054 055 055 055 056 Playing back a still image Playing back a movie clip Movie clip capture function Playing back a recorded voice Playing back a voice memo LCD monitor Indicator Using the camera buttons to set the camera Thumbnail / Enlargeme
Contents SOFTWARE 077 Software Notes 77 077 078 079 081 084 085 085 085 086 089 System Requirements About the software Setting up the application software Starting PC mode Removing the removable disk Setting up the USB Driver for MAC Using the USB Driver for MAC Removing the USB Driver for Windows 98SE Samsung Master FAQ Downloaded From camera-usermanual.
System chart Please check that you have the correct contents before using this product. The contents can vary depending on the sales region. To buy the optional equipment, contact your nearest Samsung dealer or Samsung service centre. Included items 01 READY Camera AA Alkaline Batteries USB cable Camera strap Software CD (see p.78) User manual, Product warranty Rechargeable battery (SNB-2512) Charger (SBC-N2) AV cable AC cord Camera case Optional items SD/SDHC memory card / MMC (see p.
Identification of features Front & Top Mode dial Shutter button Power button Microphone Speaker Flash DC input connection port USB / AV connection terminal Lens/ Lens cover Downloaded From camera-usermanual.
Identification of features Back Camera status lamp Zoom T button (Digital zoom) Face Detection(FD) button E (Effects) button Strap eyelet LCD monitor Fn / Delete button 5 function button Play mode / Printer button Downloaded From camera-usermanual.
Identification of features Bottom / 5 Function button Self-timer lamp Battery chamber cover Tripod socket Memory card slot Battery chamber Icon Status Description - For the first 8 seconds, the lamp blinks at 1 second intervals. - For the final 2 seconds, the lamp blinks quickly at 0.25-second intervals. ✢ Blinking ✡ Blinking For the 2 seconds, the lamp blinks quickly at 0.25-second intervals.
Identification of features Connecting to a Power Source Mode icon We recommend batteries for a digital camera (Within a year from the date of manufacture). The batteries are listed below. - Non rechargeable batteries : 2 X AA Alkaline (High Capacity) - Rechargeable batteries (Optional) : SNB-2512 (Ni-MH) Refer to page 16 for more information about the camera mode setting.
Connecting to a Power Source Inserting the memory card Insert the battery as shown Insert the memory card as shown. - If the camera does not turn on after you have inserted battery, please check whether the battery (+ / -). - When the battery chamber cover is opened, do not force the battery chamber cover, this may damage it. - Turn off the camera’s power before inserting the memory card.
Instructions on how to use the memory card Downloaded From camera-usermanual.com Samsung Manuals If the memory card is subjected to any of the following, the recorded data may become corrupted : - When the memory card is used incorrectly. - If the power is switched off or the memory card is removed while recording, deleting (formatting) or reading. Samsung cannot be held responsible for lost data. It is advisable to copy important data onto other media as back-up e.g.
Instructions on how to use the memory card The camera can use SD/SDHC Memory Cards and MMC (Multi Media Cards). Card pins Write protect switch Label [SD (Secure Digital) memory card] The SD/SDHC memory card has a write protect switch that prevents image files from being deleted or formatted. By sliding the switch to the bottom of the SD/SDHC memory card, the data will be protected. By sliding the switch to the top of the SD/SDHC memory card, the data protection will be cancelled.
LCD monitor indicator The LCD monitor displays information about the shooting functions and selections. No. Description Icons Page 5 Memory card icon / Internal memory icon Ö/× - 6 Battery 8 [Image & Full Status] No. Description 1 Recording mode 2 3 4 Icons Page p.11 Optical / Digital Zoom bar / Digital Zoom rate Voice Memo / Without Sound Number of available shots remaining Ï/Ç p.39/40 5 p.14 Remaining time 00:00:00 p.22 p.14 Downloaded From camera-usermanual.
Starting the recording mode How to use the Auto mode ( μ ) How to use the Program mode ( ) Select this mode for quick and easy picture taking with minimal user interaction. Selecting the automatic mode will configure the camera with optimal settings. You can still manually configure all functions except the aperture value and shutter speed. 1. Insert the batteries (p.12). Insert the batteries taking note of the polarity (+ / -). 2. Insert the memory card (p.12).
Starting the recording mode How to use the Manual mode ( ¸ ) How to use the DIS mode ( ) You can manually configure all functions aperture value and shutter speed. Digital Image Stabilisation (DIS) mode. This mode will reduce the effect of camera shake and help you get a well-exposed image in dim conditions. Things to watch out for using the DIS mode 1. The digital zoom will not operate in the DIS mode. 2.
Starting the recording mode Using the Photo Help guide mode ( ` ) Available functions of the photo help guide Helps the user learn the correct picture taking method and includes solutions for potential problems that may occur. This also enables the user to practice the best way to take the pictures.
Starting the recording mode How to use the Portrait mode ( ) Please select this mode for quick and easy portraits. Select Portrait mode using mode dial. The scene modes are listed below. [Nightscene] ( ) : Use this for shooting still images at night or [Children] ( ) : To take a picture of fast moving objects, [Landscape] ( ) : To take pictures of distant scenery. [Close Up] ( ) : Close-up shooting for small objects such as [Text] ( ) : Use this mode to shoot a document.
Starting the recording mode How to use the Movie clip mode ( ´ ) A movie clip can be recorded for as long as the available recording time of the memory capacity allows. 1. Select the Movie clip mode by rotating the Mode dial. ( The Movie clip mode icon and available recording time will display on the LCD monitor.). 2. Point the camera towards the subject and compose the image by using the LCD monitor. 3.
Things to Watch Out for When Taking Pictures Pressing the shutter button down half way. Lightly press the shutter button to confirm focus and flash battery charge. Press the shutter button all way down to take the picture. [Press the shutter button] The available memory capacity may vary depending on shooting conditions and camera settings.
Using the camera buttons to set the camera ZOOM W / T button The recording mode function can be set up by using the camera buttons. If the menu is not displayed, this button works as the OPTICAL ZOOM or DIGITAL ZOOM button. This camera has a 3X optical zoom and a 3X digital zoom function. Using both will offer a total zoom ratio of 9X. POWER button Used for turning the camera’s power on / off.
ZOOM W / T button WIDE Zoom Optical zoom WIDE Images taken using the digital zoom may take a little longer for the Pressing the ZOOM W button Pressing the ZOOM W button [TELE zoom] [Optical zoom 2X] Digital zoom WIDE Optical zoom Digital zoom zoom. To view a clearer digital zoom image, press the shutter button halfway at the maximum optical zoom position and press the zoom T button again.
Face Detection(FD) button Face Detection(FD): This mode detects the face position of the subject automatically and then sets the focus and exposure. Select this mode for quick and easy face picture. Ä Selectable modes: Auto, Program, Manual, DIS, Portrait, Children, Beach & Snow 1. Press the FD(Face Detection) button ( ! ) in the selectable modes. The FD icon will be displayed on the screen left side. 2. The size and position of the auto focus frame is set at the face of the subject automatically. 3.
Face Detection(FD) button Function Description / Info ( î ) / Up button Self Portrait While the menu is showing, the Up button operates as a direction button. If the menu screen does not appear, information or function descriptions of the current filming image (filming mode) can be accessed through the liquid crystal monitor by pressing the Function description/ Information ( î ) button.
Macro ( e ) / Down button While the menu is showing, press the DOWN button to move from the main menu to a sub menu, or to move down the sub menu. When the menu is not showing, you can use the MACRO / DOWN button to take macro pictures. The distance ranges are shown below. Press the Macro button until the desired macro mode indicator appears on the LCD monitor.
Macro ( e ) / Down button Focus lock Available focusing method, by recording mode ( o : Selectable, " : Infinity focus range) To focus on a subject not positioned in the centre of the picture, use the focus lock function. Auto macro Š ‰ ✆ ÿ _ † o Mode Macro Normal o o o o o o o o o o o o SCENE Auto macro Macro Using the Focus Lock 1. Ensure the subject is in the centre of the autofocus frame. 2. Press the SHUTTER button halfway.
Flash ( # ) / Left button When the menu is displayed on the LCD monitor, pressing the LEFT button makes the cursor shift to the left tab. When the menu is not displayed on the LCD monitor, the LEFT button operates as the FLASH button. If you press the shutter button after selecting the Auto, Fill-in, Slow [Selecting the Auto flash] Selecting the flash mode 1. Press the Mode button to select a RECORDING mode with the exception of the Movie clip mode or the DIS mode.(p.16) 2.
Flash ( # ) / Left button Flash mode indicator Icon ] # ª Œ Auto flash Auto & Red eye reduction Fill in flash Slow synchro Flash off ( o : Selectable) Available flash mode, by recording mode Description If the subject or background is dark, the camera flash will operate automatically. If a subject or background is dark, the camera flash will work automatically and will reduce the red-eye effect by using the redeye reduction function. The flash fires regardless of the available light.
Self-timer ( ✢ ) / Right button When the menu is displayed on the LCD monitor, pressing the Right button makes the cursor shift to the right tab. When the menu is not displayed on the LCD monitor, the RIGHT button operates as the Self-timer ( ✢ ) button. This function is used when the photographer would also like to be in the image. If you operate the Self-timer button during the self-timer operation, the self-timer function is cancelled. Use a tripod to prevent the camera from shaking.
MENU / OK button Motion Timer MENU button - When you press the MENU button, a menu related to each camera mode will be displayed on the LCD monitor. Pressing it again will return the LCD to the initial display. - A menu option can be displayed when the following are selected : MOVIE CLIP and STILL IMAGE mode. There is no menu available when the voice recording function is selected.
E (Effect) button It is possible to add special effects to your images by using this button. Available Effects, by recording mode æ ( o : Selectable) † Š ‰ ✆ o o o o o o o o This button will not operate in DIS, Voice recording mode and some scene modes (Nightscene, Text, Sunset, Dawn, Backlight, Firework, Beach&Snow). Even if the camera is turned off, the effect setting will be preserved. To cancel the settings, select ( ä ). 1.
Fn button How to use the Fn menu You can use the Fn button to set the following menus. ( o : Selectable) ‰ ✆ ÿ Size o o o Quality/ Frame rate o o Metering Shapness ³ † Page o o o o p.34 o o o o o p.34 o o o o p.35 o o ISO o o White Balance o o EV o _ o p.35 o p.36 o o o p.36 o o o p.37 1. Press the Fn button in an available mode. 2. Select a desired menu by pressing the Up / Down button.
Quality / Frame rate Size You can select the image size appropriate for your application.
Sharpness If you cannot obtain suitable exposure conditions, you can change the metering method to take brighter pictures. You can adjust the sharpness of the picture you are about to take. You cannot check the sharpness effect on the LCD monitor before you take a picture, because this function is applied only when the captured image is stored on the memory. [Multi] : Exposure will be calculated based on an average of the available light in the image area.
ISO White balance You can select the ISO sensitivity when taking pictures. The speed or specific light-sensitivity of a camera is rated by ISO numbers. The white balance control allows you to adjust the colours to appear more natural. [Auto] : The camera's sensitivity is automatically changed by variables such as lighting value or subject brightness.
White balance Exposure compensation Using the Custom White Balance White balance settings may vary slightly depending on the shooting environment. You can select the most appropriate white balance setting for a given shooting environment by setting up the custom white balance. This camera automatically adjusts the exposure according to the ambient lighting conditions. You can also select the exposure value by using the Fn button. White paper 2. MENU/OK button : selects previous custom white balance.
Recording ( Ò ) You can use the menu on the LCD monitor to set up recording functions. The items indicated by are default settings. Auto Focus type Mode Menu Sub menu Available mode Page Foucs Area Center AF Multi AF p.38 Voice Memo Off On p.39 You can select your preferred Focus Area according to the shooting conditions. RECORDING Foucs Area Voice Memo Ò ( Recording ) Voice Mute - Off p.39 On p.
Recording ( Ò ) Voice Memo Foucs Area Voice Memo Voice Record Off OK Set - If the voice memo indicator is displayed on the LCD monitor, the setting is completed. Press the shutter button to record a voice. - Press the shutter button once and voice is recorded for as long as the available recording time (max:10 hour) allows. The recording time will be displayed on the LCD monitor. Voice will still be recorded if the shutter button is released.
Recording ( Ò ) Voice Recording Recording the movie clip without voice Pausing while recording a voice You can record the movie without voice. RECORDING SH Stop REC 1. Press the Pause button ( Ø ) to pause [Voice recording mode] recording. 2. Press the Pause button ( Ø ) again to resume the recording. 3. If you wish to stop recording, press the shutter button again. Select [On] of [Voice Mute] menu in the Movie clip mode. ( Ç ) icon will appear on the LCD monitor.
Sound menu Sound ( * ) In this mode, you can set up sound settings. You can use the setup menu in all camera modes, except Voice Recording mode. The items indicated by are default settings. Volume Start Sound Shutter Sound * ( Sound ) Beep Sound Off Low Medium High Off Sound 1 Sound 2 Sound 3 Off Sound 1 Sound 2 Sound 3 Off Sound 1 Sound 2 Sound 3 Available mode Page p.41 SOUND Volume Off Start Sound Low Shutter Sound Beep Sound High AF Sound Self Portrait p.
Setup menu Sound ( * ) Beep Sound If you set sound to ON, various sounds will be activated for camera startup, when buttons are pressed, so that you can be aware of the camera operation status. Mode Sub menu Menu Page SOUND Volume Start Sound Shutter Sound Beep Sound - [Beep Sound] sub menu : [Off], [Sound 1, 2, 3] In this mode, you can set up basic settings. You can use the setup menu in all camera modes, except Voice Recording mode. The items indicated by are default settings.
Setup menu Menu Sub menu Page LA, San Francisco Denver, Phoenix Date & Time (Display) Start Image LCD Bright Quick View Buenos Aires Mid-Atlantic Cape Verde - Off User Image Logo - Auto Dark Normal Bright Off 0.5 sec 1 sec 3 sec p.44 p.44 p.44 Off On p.45 Format No Yes p.46 Reset No Yes p.46 File Reset Series p.
Display ( , ) Setting up the Date / Time / Date type Start up image You can change the date and time that will be displayed on the captured images and set up the date type. Setting [World Time] enables you to display the local date and time on the LCD monitor when travelling overseas. You can select the image that is first displayed on the LCD monitor whenever the camera is turned on.
Display ( , ) Quick view LCD save If you enable Quick View before capturing an image, you can view the image you just captured on the LCD monitor for the duration set in the [Quick View] setup. Quick view is possible only with still images. If you set the [LCD save] to On and the camera isn't operated during the specified time, the LCD monitor will be turned off automatically. DISPLAY Language Date&Time Start Image LCD Bright Quick View LCD Save Back Off 0.
Settings ( ” ) Formatting a memory Initialisation This is used for formatting the memory. If you run [Format] on the memory, all images, including the protected images, will be deleted. Be sure to download important images to your PC before formatting the memory. All camera menu and function settings will be restored to their default values. However, values for DATE / TIME, LANGUAGE, and VIDEO OUT will not be changed. - Sub menus [No] : The memory will not be formatted.
Settings ( ” ) Imprinting the recording date This function allows the user to select the file naming format. There is an option to include DATE / TIME on still images. [Reset] : After using the reset function, the next file name will be set from 0001 even after formatting, deleting all or inserting a new memory card. [Series] : New files are named using numbers that follow the previous sequence, even when a new memory card is used, or after formatting, or after deleting all pictures.
Settings ( ” ) Auto power off Selecting Video out type This function switches the camera off after a set amount of time in order to prevent unnecessary battery drainage. The Movie output signal from the camera can be NTSC or PAL. Your choice of output will be governed by the type of device (monitor or TV, etc.) to which the camera is connected. PAL mode can support only BDGHI. : The power off function will SETTINGS Format not operate.
Settings ( ” ) Auto Focus lamp You can turn on and off the Auto Focus lamp. SETTINGS Reset File Imprint Power Off Video Out AF Lamp - Sub menus [Off] : The AF lamp will not light up in low light conditions. [On] : The AF lamp will light up in low light conditions. 03 SETUP - NTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico. - PAL : Australia, Austria, Belgium, China, Denmark, Finland, Germany, U.K.
Starting play mode Turn the camera on and select Play mode by pressing the play mode button ( Î ). The camera can now play back the images stored in the memory. If the memory card is inserted in the camera, all the camera functions apply only to the memory card. If the memory card is not inserted in the camera, all the camera functions apply only to the internal memory. Playing back a still image 1. Select the PLAY mode by pressing the play mode button ( Î ). 2.
Starting play mode Playing back a recorded voice 1. Select the recorded voice that you want to play back by using the Left/Right button. 2. Press the play & pause button ( Ø ) to play back a recorded voice file. - To pause a recorded voice file, while playing it back, press the play & pause button Play again. - To resume playback of the voice file, press the play & pause button - To rewind the voice file while it is playing, press the Left button. To fast forward the voice file, press the Right button.
LCD monitor Indicator Using the camera buttons to set the camera The LCD monitor displays shooting information about the displayed image. In Play mode, you can use the buttons on the camera to conveniently set up the Play mode functions. Thumbnail ( º ) / Enlargement ( í ) button You can view multiple pictures, enlarge a selected picture, and crop and save a selected area of an image. No.
Thumbnail ( º ) / Enlargement ( í ) button The maximum enlargement rate in proportion to the image size 1. Select an image that you want to enlarge and press the enlargement button. 2. Different parts of the image can be viewed by pressing the 5 function button. 3. Pressing the thumbnail button will zoom back to the original full sized image. - You can tell whether the image displayed is an enlarged view by checking the image enlargement indicator shown at the top left of the LCD monitor.
Info( î ) / Up button Play & Pause ( Ø ) / Down button When the menu is displayed on the LCD monitor, the UP button operates as a direction button. When the menu is not displayed on the LCD monitor, pressing the Info button will display image information on the LCD monitor. In Play mode, the play & pause/ down button works as follows: Info ( î ) button Info ( î ) button - If the menu is displayed Press the DOWN button to move from the main menu to a sub menu, or to move down the sub menu cursor.
Left / Right / Menu / OK button Delete ( Õ ) button LEFT / RIGHT / MENU / OK buttons activate the following. This deletes images stored on the memory card. - LEFT button Printer ( » ) button When the camera is connected to a PictBridge printer, you can print images by pressing the Printer button. Print 1. Select an image that you want to delete by pressing the Left / Right button and press the DELETE ( Õ ) button.
E (Effect) button : Resize Change the resolution (size) of pictures taken. Select [Start image] to save an image to be the start-up image. 1. Press the play mode button and press the E button. 2. Press the Left / Right button and select the [RESIZE] ( ñ ) menu tab. 3. Select a desired sub menu by pressing the Up / Down button and press the OK button.
E (Effect) button : Colour You can rotate the stored images by various degrees. It is possible to add colour effects to your images by using this button. 1. Press the play mode button and press the E button. 2. Press the LEFT / RIGHT button and select the [ROTATE] ( ò ) menu tab. 3. Select a desired sub menu by pressing the UP / DOWN button. 1. Press the play mode button and press the E button. 2. Select ( æ ) menu tab by pressing the Left / Right button.
E (Effect) button : Colour Custom colour You can change the R (Red), G (Green) and B (Blue) values of the image. Custom Color Move - OK button : Select / setup the Custom Colour - Up / Down button : Selects R, G, B - Left / Right button : Change the values OK Set Custom Color Move OK Set Downloaded From camera-usermanual.
Setting up the play back function using the LCD monitor PLAY mode functions can be changed by using the LCD monitor. In the PLAY mode, pressing the MENU button displays the menu on the LCD monitor. The menus you can set up in Play mode are as follows. To capture an image after setting up the play menu, press the PLAY mode button or shutter button. ( ❸) - All Pics - Sub Menu Secondary Menu Page - p.60 Auto - All Date - Select - p.
Setting up the play back function using the LCD monitor Menu Tab Main Menu Type Quality ❹ Date Print File Name Reset Sub Menu Secondary Menu Auto - Plain - Photo - FastPhoto - Auto - Draft - Normal - Fine - Auto - Off - On - Auto - Off - On - No - Yes - Page Images can be displayed continuously at pre-set intervals. You can view the Multi Slide Show by connecting the camera to an external monitor. 1. Press the play mode button and press the menu button. 2.
Starting the Multi Slide Show ( ❸ ) Configure Multi Slide Show effects You can select image to view Unique screen effects can be used for the Multi Slide Show. 1. Use the Up / Down buttons to select the [Image] menu and press the Right button. 1. Select the [Effect] sub menu by pressing the UP / DOWN button and press the RIGHT button. MULTI SLIDE SHOW Show 2. Select a desired sub menu by pressing Image All the Up / Down button.
Starting the Multi Slide Show ( ❸ ) Playback ( ø ) Setting play interval Voice memo Set the Multi Slide Show play interval. You can add your voice to a stored still image. 1. Select the [Interval] sub menu by pressing the UP / DOWN button and press the RIGHT button. 2. Use the Up / Down buttons to select the desired interval. 3. Press the OK button to save the configuration.
Playback ( ø ) Deleting images Protecting images This deletes images stored on the memory. This is used to protect specific shots from being accidentally erased (Lock). It also unprotects images that have been previously protected (Unlock). Of all the files stored in the memory card, the unprotected files in the DCIM subfolder will be deleted. Remember that this will permanently delete unprotected images. Important shots should be stored on a computer before deletion takes place.
Playback ( ø ) DPOF(Digital Print Order Format) allows you to embed printing information on your memory card’s MISC folder. Select the pictures to be printed and how many prints to make. The DPOF indicator will display on the LCD monitor when an image that has DPOF information plays back. Images can then be printed on DPOF printers, or at an increasing number of photo labs. This function is not available for Movie clips and Voice recording files.
Playback ( ø ) 1. Press the Up / Down button and select the [DPOF] menu tab. And then press the Right button. 2. Press the Right button again and select the [Size]. Sub menu will display. 3. Select a desired sub menu by pressing the UP / DOWN button and press the OK button. [Select] : Selection window to change the printed size of the image is displayed. - Up / Down / Left / Right : Select an image. - Zoom W / T Button : Change the print size.
Playback ( ø ) Copy To Card When this menu is selected without inserting a memory card, the [No This enables you to copy image files, movie clips and voice recording files to the memory card. If there is not enough space available in the memory card to copy 1. Select the [Copy To Card] menu tab by PLAYBACK pressing the Up / Down button. And then Voice Memo press the Right button. Delete 2. Select a desired sub menu by pressing the Protect DPOF UP/ DOWN button and press the OK button.
PictBridge You can use the USB cable to connect this camera to a printer that supports PictBridge (sold separately) and print the stored images directly. Movie clips and voice files cannot be printed. 1. Connect the camera and printer with USB cable. 2. Select the [Printer] menu by pressing Up / Down button and press the OK button. Select USB Computer Printer OK Confirm Connecting the Camera to a Printer Downloaded From camera-usermanual.
PictBridge : Picture Selection PictBridge : Print Setting You can select images you want to print. You can select the Paper Size, Print Format, Paper Type, Print Quality, Date Print, and File Name Print menus for printed pictures. Setting the Number of Copies to Print 1. Press the Menu button and the PictBridge menu will display. 2. Use the Up / Down buttons to select the [Images] menu and press the Right button. 3. Use the Up / Down buttons to select a desired sub menu and press the OK button.
PictBridge : Reset Important notes Initialises user-changed configurations. Be sure to observe the following precautions! Ä Default print setting varies depending on the printer manufacturer. For your printer’s default setting, refer to the user’s guide that came with your printer. This unit contains precision electronic components. Do not use or store this unit in the following locations. - Areas exposed to severe changes in temperature and humidity. - Areas exposed to dust and dirt.
Important notes - If you use this camera in wet places, such as beach or pool, do not let water or sand get inside the camera. Doing so may result in failure or may permanently damage the unit. Extremes in temperature may cause problems. - If the camera is transferred from a cold to a warm and humid environment, condensation can form on the delicate electronic circuitry. If this occurs, turn the camera off and wait for at least 1 hour until all moisture is dispersed.
Warning indicator There are several warnings that may appear on the LCD display. [ Card Locked! ] The memory card is locked $ SD/SDHC memory card : Slide the write protect switch to the top of the memory card 04 PLAY [ Card Error!] Memory card error $ Turn off the camera power and turn it on again $ Insert the memory card again $ Insert and format the memory card (p.46) [ File Error! ] File error $ Delete the file. Memory card error $ Contact a camera service centre.
Before contacting a service centre Please check the following The camera doesn’t switch on There is low battery capacity $ Insert fresh batteries. (p.12) Battery is inserted incorrectly with the polarities reversed. $ Insert the battery according to the polarity marks (+, -). The camera power ceases while in use The battery is exhausted $ Insert fresh batteries. The Camera is turned off automatically $ Turn on the camera power again.
Before contacting a service centre The flash does not fire Flash off mode has been selected $ Dis-engage flash off mode The camera mode can't use the flash $ Refer to the FLASH instruction (p.28) The camera buttons do not operate Camera malfunction $ Remove/re-insert battery and switch the camera on A card error has occurred while the memory card is in the camera.
Specifications Image Sensor - Type : 1/2.5" CCD - Effective Pixel : S860 : Approx. 8.1 Mega-pixel S760 : Approx. 7.2 Mega-pixel - Total Pixel : S860 : Approx. 8.3 Mega-pixel S760 : Approx. 7.2 Mega-pixel Flash - Modes : Auto, Auto & Red-eye reduction, Fill-in flash, Slow sync, Flash off - Range : Wide : 0.3m ~ 4.0m, Tele : 0.5m ~ 2.1m - Recharging Time : Approx. 5.5 sec Lens - Focal Length : SHD Lens f = 6.3 ~ 18.9mm (35mm film equivalent : 38 ~ 114mm) - F No. : F2.8(W) ~ F5.
Specifications Storage - Media ·Internal memory : About 11MB flash memory ·External Memory (Optional) : MMC card (Up to 1GB guaranteed) SD card (Up to 2GB guaranteed) SDHC card (Up to 4GB guaranteed) - File Format ·Still Image : JPEG (DCF), EXIF 2.2, DPOF 1.1, PictBridge 1.
Specifications Power Source - Primary Battery : 2 X AA Alkaline - Rechargeable battery (Optional) : SNB-2512B KIT( 2xAA Ni-MH Battery & Charger ) Ä Included battery may vary depending on sale region. Dimensions (WxHxD) - 93 X 62 X 26.5mm (excluding protrusions) Weight - Approx. 123g (without batteries and card) Operating Temperature - 0 ~ 40°C Operating Humidity - 5 ~ 85% Software - Samsung Master, Adobe Reader Specifications are subject to change without prior notice.
Software Notes For Windows For Macintosh PC with processor better than Pentium 450MHz (Pentium 800MHz recommended) Power Mac G3 or later Windows 98SE / 2000 / ME / XP/Vista Mac OS 9.2 ~ 10.
About the software After inserting the CD-ROM provided with this camera into the CD-ROM drive, the following window should automatically run. Before connecting the camera to the PC, you should first install the camera driver. Camera driver : This enables images to transfer between the camera and PC. This camera uses the USB Storage Driver as the camera driver. You can use the camera as a USB card reader.
Setting up the application software To use this camera with a PC, install the application software first. After this has been done, the stored images in the camera can be moved to the PC and can be edited by an image editing program. 2. Install the camera driver, DirectX, Samsung Master and Adobe Reader by selecting a button shown on the monitor. If a recent version of DirectX has been installed on your computer, DirectX may not be installed. You can visit the Samsung web-site through the internet.
Setting up the application software 3. After restarting the computer, connect the PC to the camera with the USB cable. 4. Turn the camera power on. The [Found New Hardware Wizard] will open and the computer will recognise the camera. Ä If your OS is Windows XP/ Vista, an image viewer program will open. If the download window of Samsung Master opens after starting Samsung Master, the camera driver was set up successfully. Downloaded From camera-usermanual.
Setting up the application software If you have installed the camera driver, the [Found New Hardware If you connect the USB cable to a USB port on your PC and then turn on the power, the camera will automatically switch to "computer connection mode". In this mode, you can download stored images to your PC through the USB cable. Camera settings for connection 1. Turn on the camera 2. Connect the camera and computer with the supplied USB cable. 3. Turn on the computer.
Starting PC mode Connecting the camera to a PC Downloading stored images You can download the still images stored on the camera to your PC's hard disk and print them or use a photo editing software to edit them. 1. Connect the camera to your PC with the USB cable. 2. On your computer's desktop display, select [My computer] and double click [Removable Disk $ DCIM$ 100SSCAM]. The image files will then be displayed.
Starting PC mode 4. A pop-up menu will open. Click the [Cut] or [Copy] menu. - [Cut] : cuts a selected file. - [Copy] : copies files. - By using [Samsung Master], you can see the stored images in the memory directly on the PC monitor and you can copy or move the image files. 5. Click a folder where you want to paste the file. view them. Opening images directly from the removable disk may be subject to unexpected disconnection.
Removing the removable disk Windows 98SE 1. Check whether the camera and PC are transferring a file. If the camera status lamp blinks, please wait until the lamp has finished blinking and is constantly on. 2. Unplug the USB cable. Windows 2000/ME/XP/Vista (The illustrations may differ from those shown depending on the Windows O/S.) 1. Check whether the camera and PC are transferring a file. If the camera status lamp blinks, please wait until the lamp has finished blinking and is constantly on. 2.
Removing the USB Driver for Windows 98SE 1. A USB Driver for MAC is not included with the software CD as MAC OS supports the camera driver. 2. Check the MAC OS version during start-up. This camera is compatible with MAC OS 9.2 ~ 10.4. 3. Connect the camera to the Macintosh and turn the camera power on. 4. A new icon will be displayed on the desktop after connecting the camera to the MAC. To remove the USB driver, refer to the process shown below. 1. Connect the camera to your PC and turn them on. 2.
Samsung Master You can download, view, edit and save your images and movies with this software. This software is only compatible with Windows. To start the program, click [Start $ Programs $Samsung $Samsung Master $Samsung Master]. Downloading images 1. Connect the camera to your PC. 2. A window for downloading images will be displayed after connecting the camera to your PC. - To download the captured images, select the [Select All] button.
Samsung Master Image viewer : You can view the stored images. Image edit : You can edit the still image. 05 SOFTWARE - Image viewer functions are listed below. Ì Menu bar : You can select menus. File, Edit, View, Tools, Change functions, Auto download, help, etc. Í Image selection window : You can select the desired images in this window. 0 Media type selection menu : You can select image viewer, image edit and movie edit functions in this menu.
Samsung Master Movie edit : You can get the still image, movie clip, narration, music files together in a movie clip. - Movie clip edit functions are listed below. Ì Edit menu : You can select the following menus. [Add Media] : You can add other media elements to a movie. [Edit Clip] : You can change the brightness, contrast, colour and saturation. [Effects] : You can insert an effect. [Set Text] : You can insert texts. [Narrate] : You can insert a narration.
FAQ Please check the following if the USB connection malfunctions. USB cable is not connected or it is not the supplied USB cable. $ Connect the supplied USB cable. Case 2 The camera is not recognised by your PC. Sometimes, the camera may appear under [Unknown Devices] in Device Manager. $ Install the camera driver correctly. Turn off the camera, remove the USB cable, plug in the USB cable again, and then turn on the camera. Case 3 There is an unexpected error during file transfer.
FAQ Correct Disposal of This Product When the DirectX 9.0 or later is not installed $ Install the DirectX 9.0 or later 1) Insert the CD provided with the camera 2) Run the windows explorer and select the [CD-ROM drive:\ USB Driver\DirectX 9.0] folder and click the DXSETUP.exe file. The DirectX will be installed. Visit the following site for downloading the DirectX.http://www.microsoft.
Correct disposal of batteries in this product Correct disposal of batteries in this product (Applicable in the European Union and other European countries with separate battery return systems.) To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system. The rechargeable battery incorporated in this product is not user replaceable.
MEMO Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
