Service manual

Samsung Electronics 4-33
Alignment and Adjustment
1) Connect the power source
(battery/DC cable).
2) Set the "POWER(CAMERA/PLAY-
ER)" switch to "CAMERA" position.
STEP 1
Press and hold the "EDIT(+)" button
and "SELFTIMER" button on the
video camera at the same time for
more than 5 seconds.
STEP 2
Press the “DISPLY” button to make color bar
appear.
STEP 3
4-5-1. EVF adjustment Preparation
Monitor screen
Note : "XX" indicates variable values.
LCD
MODE 1
EPR:XX EVR:XX
01
Remote Control Button Location
1) VIDEO GAIN
a) Connect an oscilloscope probe to
TP-V.
b) Adjust the VRE02 so that A level is
2.5 Vp-p
4-5-2. EVF adjustment
10 PIN CON.
Location of Test Point
VR
2 PIN CON.
4-5. EVF Adjustment