Service manual

Samsung Electronics 4-25

Alignment and Adjustment

4-3. LCD Adjustment

Notes: For LCD adjustment, use the buttons on the video camera and the remote control.

After each adjustment step is completed, OSD shows "OK".

EEPROM(ICL202) stores confirmed adjustment value of each adjustment step.

After finishing the adjustment, turn power off.

Note: In service adjustment mode, button names are different from those in customer function control

mode.

STEP 1

1. Connect the power source

(battery/DC cable).

2. Set the "CAMERA/PLAYER" switch to

"CAMERA" position.

3. Camera screen and OSD appears.

4. Open housing of the video camera and

remove tape.

5. Open the LCD.

STEP2

1) Press and hold the "EDIT(+)" button on the

video camere and"SELF TIMER" button on the

remote control at the same time for more than 5

seconds.

When monitor OSD shows as above screen, LCD

adjustment mode has been activated successfully.

Note : "XX" indicates variable values.

1. How to get into the LCD adjust mode.

2. Functions of each button on the Remote Control

Monitor screen

Remote Control Button Location

LCD

USR BRT

EPR:XX EVR:XX

Description

Button

START/STOP (Confirm)

FF (Mode Up)

REW (Mode Down)

PLAY (Data Up)

STOP (Data Down)

Stores changed value in the adjustment mode.

Shift adjustment address to left.

Shift adjustment address to right.

Down value.

Up value.