Specifications

4-2-3 Test Pattern (Aging Mode)
1. This mode can be used during servicing, or for
confirming that the convergence and purity
adjustments are correct.
2. Access the Test Pattern parameters by pressing
a CHANNEL keys (▲ ,▼) while the Service
Mode is on. The cursor will move to the test
pattern. Press the VOLUME keys. On-screen
display:
• WHITE
• AGING
3. AGING Mode (Reference Only)
This pattern is used for pre-heating the CRT
during manufacturing
Ñit is accessed in the factory by twice press-
ing the ÒSLEEP ® FACTORY®FACTORY Ò
key, then white pattern will be displayed.
Even if the TV power is cut off, the Aging
Mode is not cancelled, The aging mode is can-
celled by repressing the ÒFACTORYÓ key or
pressing the local ÒCH UP/DOWNÓ keys.
Alignment and Adjustments
Samsung Electronics 4-9