User manual

English - 2
Remote Control (depending on the model)
➢
Operation of remote control may be affected by bright
artificial light near to the TV.
1 POWER
Used to switch the TV
on and off.
2 MENU
Used to display the
on-screen menu or
return to the previous
menu.
3 ▲/▼/◄/►
Used to control the
cursor in the menu.
P < / >
Used to display the
next or previous stored
channel
= + / -
Used to increase or
decrease the volume.
4 MUTE
Used to switch the
sound off temporarily. To
turn the sound back on,
press the MUTE,
= + or = - button.
5 Numeric buttons
Used to select channels
directly.
6 INFO
Used to view the
channel information
and setting status you
selected.
7 SOURCE
Used to display all of
the available video
sources.
8 TOOLS
(depending on
the model)
You can check the
following selection by
pressing Tools button.
1. Sleep Timer(Used to
select a preset time
interval for automatic
turn off.)
2. Picture Mode(Used
to select the picture
effect.)
3. Sound Mode(Used
to select sound
effect.)
4. Dual I-II(Used to
select sound mode.)
5. Turbo Sound(Used
to select the turbo
sound option.)
6. Sound Adjust(Used
to display the sound
menu)
9 ENTER
While using the on-
screen menus, press
the ENTER button to
activate (or change) a
particular item.
0 EXIT
Used to exit from any
display or return to
normal viewing.
! PRE-CH
Used to switch
repeatedly between
the last two channels
displayed.
Turning the TV On and Off
Press the POWER button,or P</> button, or Numeric
button on the remote control. You can also use the P button
on the TV.
➢
Caution: One pole switch is totally not off (one line still live)
if power cord is not unplugged.
Installing Batteries
Remove the cover. Install two AAA size
batteries, then replace the cover.
When the remote control does not operate
normally, check that the “+” and “–” ends of
the batteries are inserted correctly or the
batteries are drained.
➢
Do not mix battery types, i.e. alkaline and manganese.
continued... continued...
AA68-03992F.indd 2 2009-02-04 오후 3:34:20