User manual

English - 6
Sound
(depending on the model)
-
Mode / Equalizer /
Auto Volume / Pseudo Stereo /
Tur bo Plus
◆ Mode: Standard/Music
/Movie/Speech/Custom
You can select the type of
special sound effect to be
used when watching a given
broadcast.
➢
You can select these
options simply by pressing the S.MODE button on
the remote control.
◆ Equalizer
The television has several settings which allow you to
control the sound quality.
➢
If you make any changes to these settings, the
sound mode is automatically switched to Custom.
◆ Auto Volume
Each broadcasting station has its own signal conditions,
and so it is not easy to adjust the volume every time the
channel is changed. This feature lets you automatically
adjust the volume of the desired channel by lowering the
sound output when the modulation signal is high or by
raising the sound output when the modulation signal is
low.
◆ Pseudo Stereo
This feature converts a monaural sound signal into two
identical left and right channels. Once the Pseudo
Stereo is set to On or Off, these settings apply to the
sound effects such as Standard, Music, Movie, and
Speech.
◆ Turbo Plus
This feature suitably emphasizes both higher and lower
bands of sound (and includes other effects). You can
enjoy more magnificent and dynamic sound when
watching music, movie, or other channels.
➢
You can change the options simply by pressing the
TURBO button on the remote control.
Move Enter Exit
Mode : Custom
√√
Equalizer
√√
Auto Volume : Off
√√
Pseudo Stereo : Off
√√
Turbo Plus : Off
√√
Sound
TV
Picture - PIP
(depending on the model)
You can display a sub picture within the main picture of TV
programme or external A/V devices such as VCR or DVD. In
this way you can watch TV program or monitor the video
input from any connected devices while watching TV or other
video input.
◆ PIP: On/Off
You can activate or deactivate the PIP funtion.
11
◆ Source
You can select a source of the sub-picture.
22
➢
Depending on the models, the sub-picture can be
viewed only when a source different from the main
picture's is selected. If a TV programme is viewed
on the main picture, the sub-picture is not available
for TV programmes. If a TV source is selected, the
message Not available is displayed.
◆ Swap
You can interchange the main picture and sub-picture.
33
◆ Size: Small/Large
You can select a size of the sub-picture.
◆ Position: / / /
You can select a position of the sub-picture.
◆ Programme
You can select a channel of the sub-picture only when
the Source is set to TV.
Easy functions of the remote control
Move Enter Return
TV
PIP : On
√√
Source : TV
√√
Swap
√√
Size : Large
√√
Position :
√√
Programme : P 1
√√
Move Enter Exit
Mode : Dynamic
√√
Custom
√√
Color Tone : Normal
√√
Size : Normal
√√
Digital NR : Off
√√
PIP
√√
Picture
TV
PIP
You can freeze the sub-picture.
The DUAL I-II button
displays/controls the processing
and output of the audio signal.
When power is switched on, the
mode is automatically preset to either “Dual-I” or “Stereo”,
depending on the current transmission.
Selecting the Sound Mode
(depending on the model)
Type of broadcast
Mono
(Normal use)
Dual-I
NICAM
Dual-II
NICAM
Mono
(Normal)
↔↔
Regular +
NICAM Mono
Regular broadcast
(Standard audio)
NICAM Dual-I/II
On-screen indication
Mono
NICAM
Mono
(Normal)
↔
➢
◆ If the receiving conditions deteriorate, listening will
be easier if the mode is set to the Mono.
◆ If the stereo signal is weak and an automatic
switching occurs, then switch to the Mono.
◆ When receiving a mono sound in the AV mode,
connect to the “AUDIO-L” input connector on the
panel (front or side). If the mono sound comes out
only from left speaker, press the DUAL I-II button.
◆ NICAM Stereo
◆ A2 Stereo
NICAM Stereo
Stereo
NICAM
Mono
(Normal)
↔
Type of broadcast
Mono
(Normal)
Bilingual or Dual-I/II
Regular broadcast
(Standard audio)
On-screen indication
Dual-I
↔ Dual-II
Stereo Stereo
Mono
(Forced mono)
↔
AA68-03867A-06Eng_Ma/Afirc 2/20/08 6:26 PM Page 6