Unit installation

4 5
ENGLISH
Installing the unit
Deciding on where to install the unit
 Install the unit in indoor and do not install it outside. The unit is designed only for indoor.
 Direct heat can make the kit have some failures in operation.
 Choose locations that are dry and sunny, but not exposed to direct sunlight or strong winds.
 Choose location where pipes and cables can be easily connected to the indoor unit.
 Avoid locations where flammable elements and explosive chemicals are stored.
 Choose a specific wall which can withstand the weight of unit and an outside force.
Mounting the unit
Procedure Remark
1. Remove 2 bolts from the unit.
Bolt
2. Open the top cover and install 4 screws on the wall.
3. Close the top cover and install 2 bolts again into the unit.
Product specifications
Item Description
MIM-E03A
Wired remote controller
Temperature sensor (Thermistor / 1EA)
Remote controller cable (1EA, 4core 15m)
Main components
Model name MIM-E03A
Detail components
Parts Qty.
Main PBA 1
Wire holder Total 7EA (2 type)
PCB support 4
Grounding screw 8
Rubber 4
Base plate 1
Top cover plate 1
Case screw 2
Weight (Net) 3kg
Packing size (W x H x D) 323 mm x 339 mm x 131 mm