Specifications

58 Issue Date: 2004/11/05 │ CONFIDENTIAL
CL765 │ Camera Application Processor
Datasheet │ Doc. #: CLQP-DS-743
}
return 0;
Figure 4-13. Decoding Flowchart
Error #1 – This error cannot occur in the normal status. If it has occurred, check if the
register setup is correct.
Error #2 – This error means that an underflow has occurred. It can occur when FIFO
size is set too small or writing speed is low. In this case, make the FIFO size
larger or speed up the writing by adjusting CS timing of the external I/O.