Specifications

56 Issue Date: 2004/11/05 │ CONFIDENTIAL
CL765 │ Camera Application Processor
Datasheet │ Doc. #: CLQP-DS-743
4.12.3. Flowchart & Pseudo Code
Figure 4-12. Encoding Flowchart
Error #1 – This error cannot occur in the normal status. If it has occurred, check if the
register setup is correct.
Error #2 – This error means that an overflow has occurred. It can occur when FIFO
size is set too small or JPEG Quality factor (Q factor) is set too low. In this
case, make the FIFO size larger or Q factor higher.