Specifications

26 Issue Date: 2004/11/05 │ CONFIDENTIAL
CL765 │ Camera Application Processor
Datasheet │ Doc. #: CLQP-DS-743
Other pins (13 pins)
Pin
NO.
Pin Name I/O Type
Drive
(mA)
Interface
Group
Description
A10 STROBE Output 4
Pin to control the action of Strobe
light.
K5 USB_DP Input/Output USB USB Differential Data Bus
K6 USB_DM Input/Output USB USB Differential Data Bus
B7
GPIO_0
(SD_CLK)
Input/Output 4
GPIO / SD
CARD
- GPIO
When not using these pins,
connect them to GND.
- SD CARD Interface
This pin is used SD CARD
CLOCK and in this case, it works
as an output pin.
C7
GPIO_1
(SD_CMD)
Input/Output 4
- GPIO
When not using these pins,
connect them to GND.
- SD CARD Interface
Assigned to SD CARD Command
line.
A8
GPIO_2
(SD_D0)
Input/Output 4
GPIO / SD
CARD
- GPIO
When not using these pins,
connect them to GND.
- SD CARD Interface
Assigned to SD CARD Data 0.
B8
GPIO_3
(SD_D1)
Input/Output 4
GPIO / SD
CARD
- GPIO
When not using these pins,
connect them to GND.
- SD CARD Interface
Assigned to SD CARD Data 1.
C8
GPIO_4
(SD_D2)
Input/Output 4
GPIO / SD
CARD
- GPIO
When not using these pins,
connect them to GND.
- SD CARD Interface
Assigned to SD CARD Data 2.
A9
GPIO_5
(SD_D3)
Input/Output 4
GPIO / SD
CARD
- GPIO
When not using these pins,
connect them to GND.
- SD CARD Interface
Assigned to SD CARD Data 3.
J4 SCAN_EN Input Reserved (LOW)
K4 T_MODE0 Input Reserved (LOW)
K3 GPIO Input/Output 4
- GPIO Pin
When not using these pins,
connect them to GND.