Specifications

104 Issue Date: 2004/11/05 │ CONFIDENTIAL
CL765 │ Camera Application Processor
Datasheet │ Doc. #: CLQP-DS-743
B. Page Program
To program 256byte or 512byte-page, the registers should be set as following flow
chart. The dotted lined-boxes in the following flow chart are performed only
when programming in Spare area. Then Status read register is read to check if the
program operation had successfully completed. If the result is Program Fail, the
fail is reported in use of an interrupt or polling. Also, under DMA command
mode, the result is reported to DMA controller, too.
Figure 4-38. Page Program – Flowchart