SCH-R261 P O R T A B L E M O B I L E T R I - B A N D P H O N E User Manual Please read this manual before operating your phone, and keep it for future reference.
Intellectual Property All Intellectual Property, as defined below, owned by or which is otherwise the property of Samsung or its respective suppliers relating to the SAMSUNG Phone, including but not limited to, accessories, parts, or software relating there to (the “Phone System”), is proprietary to Samsung and protected under federal laws, state laws, and international treaty provisions.
Nuance®, VSuite™, T9® Text Input, and the Nuance logo are trademarks or registered trademarks of Nuance Communications, Inc., or its affiliates in the United States and/or other countries. The Bluetooth® word mark, figure mark (stylized “B Design”), and combination mark (Bluetooth word mark and “B Design”) are registered trademarks and are wholly owned by the Bluetooth SIG. microSD™ and the microSD logo are Trademarks of the SD Card Association.
Disclaimer of Warranties; Exclusion of Liability EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE PURCHASER TAKES THE PRODUCT "AS IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE WORKMANSHIP OF THE P
Table of Contents Section 1: Getting Started .............................................. 4 Understanding this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . Text Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installing the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Removing the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Charging the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Create and Send Text Messages . . . . . . . . . . . . . . . . . . . . . . . 45 Receive Text Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Chat View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Send Picture Messages in Camera Mode . . . . . . . . . . . . . . . . 48 Send Picture Messages in Standby Mode . . . . . . . . . . . . . . . . 50 Receive Picture Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 Message Boxes . . . . . . . .
Samsung Mobile Products and Recycling . . . . . . . . . . . . . . . 107 UL Certified Travel Charger . . . . . . . . . . . . . . . . . . . . . . . . . 108 Display / Touch-Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108 GPS & AGPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109 Emergency Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Section 1: Getting Started This section explains how to start using your Samsung SCH-R261 phone by activating your service, setting up your Voicemail, or getting an understanding of how this manual is put together. Understanding this Manual The chapters of this guide generally follow the same order as the menus and sub-menus in your phone. A robust index for quick reference to most features begins on page 127. Also included is important safety information that you should know before using your phone.
➔ Used in place of “select” in long “drill down” procedure steps. Example: Select Settings ➔ Call Settings ➔ Call Answer. Installing the Battery Note: Your phone comes packaged with a partially charged rechargeable standard Li-Ion battery and travel adapter. Important!: You must fully charge the battery the first time you use your phone, otherwise you could damage the battery. 1. Grasp the device firmly and locate the cover release latch. 2.
Removing the Battery 1. Press and hold 2. Grasp the device firmly and locate the cover release latch. 3. Place your fingernail in the opening and firmly “pop” the cover off the device. 5. 6 Place the battery cover back over the battery (1) and press down lightly (2) until it clicks into place. to turn off the phone.
1. 4. Lift the bottom of the battery up (1) and away (2) from the phone. Caution!: For connection to an electrical supply not located in North America, you must use an adaptor of the proper configuration for the power outlet. Use of the wrong adapter could damage your phone and void your warranty. 2. Insert the smaller end of the Travel Adapter into the charger/accessory connector on the right side of your phone. Charging the Battery Your phone is powered by a rechargeable standard Li-Ion battery.
Low Battery Indicator The battery indicator ( ) in the upper-right corner of the display indicates power level. Monitor the battery strength and ensure your battery is adequately charged. Three bars ( ) indicate a full charge. An empty battery icon ( ) indicates a near empty battery. A blinking empty battery icon ( ) and a tone sounding indicate you have two to three minutes before the battery is too low to operate the phone.
2. Follow the prompts in the new user tutorial to setup your mail box. Listen to Voicemail 䊳 In standby mode, press and hold or dial your own mobile number to dial Voicemail. After connecting, you will hear your voice greeting. You are prompted to enter your password.
Section 2: Understanding Your Phone This section outlines some key features of your phone. It also describes the screen format and the icons that display when the phone is in use. Open View (Front) of the Phone Features of Your Phone • Domestic and international voice and text messaging service (available on participating networks).
Features 1. Earpiece: Lets you hear ringing and alert tones, alarm tones, and other parties during calls. 2. Main Display: Indicates the status of your phone, including numbers dialed, feature and function screens, status 3. 11. CLR Key: Deletes characters from the display when you are menu or screen when navigating features on the phone. OK Key: Pressing when navigating through a menu accepts Left Soft Key: Used to navigate through menus and SEND Key: Lets you place or receive a call.
Closed View (Front) of Your Phone Features Side Views of Your Phone 4 1 2 1 3 2 1. 1. 2. Volume Key: Lets you adjust the ring volume in standby Camera lens: Used to focus the subject when taking a mode, adjust the voice volume during a call, or mute the picture. ringer during an incoming call. Front Display: Indicates the status of your phone, including 2.
3. Camera Key: Launches the Camera feature of your phone and takes photos. 4. Accessory slot: Used to connect a carrying strap to the phone. Command Keys Functions for the soft keys are defined by what displays above each on the screen. There are two soft keys, Left ( ) and Right ( ). Left Soft Key Some functions of the Left soft key ( ) are as follows: • In standby mode, press the Messages soft key ( ) to launch the Messages menu.
• Press and hold • Briefly press to erase the entire sentence. to back up one menu level. Understanding the Display Screen 1. End Key • Press and hold the End key to turn your phone on or off. • Briefly press once to disconnect a call. • Press to return to standby mode from any menu, or to cancel the last input. Navigation Key Use the directional keys on the Navigation key ( ) to browse menus, sub-menus, and lists. Each directional key also acts as a shortcut to launch applications.
Menu Navigation Display Screen Icons Your R261 phone displays a table of definitions for the icons that display on the top line of the screen. To access the Icon Glossary: 䊳 In standby mode, press , then select Settings ➔ Phone Access the menus and sub menus in your phone using the navigation key ( ) and soft keys ( ), or use a shortcut. 1. Dialogue Boxes Dialogue boxes prompt for action, inform you of status, or warn of situations such as low battery.
Navigation Key Shortcuts Your Phone’s Modes In standby mode, press a navigation key to launch the key’s corresponding application. Create Txt Msg All Calls Messages Standby mode is the state of the phone once it has found service and is idle. The phone goes into standby mode: • After you power on the phone. • When you press after a call or from within a menu. In standby mode, you will see the time, day, and date as well as all phone status icons.
Adjusting Your Phone’s Master Volume In standby mode, press the Volume key up or down. 1. In standby mode, press the Volume key up or down to set the call ringer volume as desired. Options are: • • • • Silence All Vibrate Low Low/Medium • Medium • Medium/High • High Tip: You can add vibration to Master Volume settings Low – High. Just press Vib.on. 2. When you are satisfied with the setting, press SET. Your phone returns to standby mode.
The Ring icon ( ) displays on the screen. Tip: You can also set your phone to Vibrate by pressing the Volume key ( ) down until “Vibrate” displays on the screen. Speakerphone Mode Speakerphone mode increases the sound volume through the earpiece during a call. This lets you conduct a call handsfree, and/or lets you share a call with others. To enter Speakerphone Mode: 1. During a call, press 2. At the prompt press Yes to turn on the speakerphone. SPK.
Symbols. (For more information, refer to “Entering Text” on page 30.) Tip: You can cycle between T9 Word, Abc, and 123 by repeatedly pressing and holding until the phone beeps. Lock Mode When the phone is in Lock Mode, restrictions are placed on phone use. You can receive calls and messages, but cannot place outgoing calls (except for emergency numbers) until you unlock the phone. Lock Mode also restricts access to menus and the Volume key. Unlock your phone by entering the lock code when prompted.
Section 3: Call Functions This section explains how to make and answer calls. This section also includes the features and functionality associated with making or answering calls. Number Entry Dialing 1. Turn on the phone and enter the number to call. 2. Press to place the call. You can specify other numbers as emergency numbers using the Emergency # settings. (For more information, refer to “Emergency #” on page 94.) Important!: Emergency number 911 is preset into your phone.
Call Another Country — Shortcut Method 1. To manually call a number with pause(s) without storing to your Contacts list: In standby mode, press and hold 1. until a plus sign (+) Press Options. A pop-up menu displays the following manual pause options: • 2-Sec Pause: a two-second pause. • Wait: a hard pause (awaits input from you). 3. Highlight the desired pause option and press to enter the highlighted pause into your number sequence. displays on the screen.
Speed Dialing Once you store phone numbers to the Contacts List, you can set up to 8 speed dial entries and then dial them simply by touching the associated numeric key. One-Touch Dialing Speed Dial numbers 2 through 9 are special One-Touch dialing numbers. You can call the phone numbers stored in your phone’s Contacts list and assigned Speed Dial numbers 2 through 9 by pressing and holding a single key.
Name Dialing dials any number stored in your Contacts list by saying the name of the contact. Digit Dialing dials any valid telephone number, as well as numbers not stored to your Contacts list by speaking the digits of the number. 5. – or – Press Settings, then press Exit to exit Voice Dial without dialing.
If the number is recognized, Voice Dial repeats and dials the number. If Voice Dial is not sure it has recognized the number, it displays a choice list of up to three numbers and prompts you with “Did you say?” followed by the first number on the list. 4. Say “Yes” to confirm the number or “No” to hear the next one, or use the keypad to select the correct number from the list. (For more information, refer to “Choice Lists” on page 82.) • Press Repeat to say the name again.
Viewing the Calls Log 2. In standby mode, press Menu ➔ Calls. The following Calls logs and options display: • Outgoing Calls • Incoming Calls • Missed Calls • All Calls • Call Timer • Data Counter 2. Select the Calls log to view or the function you want to use. 1. Outgoing Calls Your phone retains information about the last 90 outgoing calls and stores them in the Outgoing calls log. You can review the Outgoing calls log for the time and date of a call, as well as other information.
Your phone retains information about the last 90 Incoming calls and stores them in the Incoming call log. You can review the Incoming call log for the time and date of the call, as well as other information. 1. 2. At the Calls menu, select Incoming Calls. A list of your Incoming calls displays on the screen.
• View Timer: Displays the number of calls and/or the total time spent on the Last Call, Outgoing Calls, Incoming Calls, Roaming Calls, All Calls, Last Reset, or Lifetime Calls. 4. Press Msgs. The following options display on the screen: • Text Message: Lets you send a text message to the selected called number. • Picture Message: Lets you send a picture message to the selected called number. Note: For more information, refer to “Types of Messages” on page 45. 5. Select an option to perform its function.
• Last Call: View the duration of your last call. • Outgoing Calls: View the duration of the total outgoing calls made on your phone, in your home zone, since the last erasure. • Incoming Calls: View the duration of the total incoming calls received on your phone, in your home zone, since the last erasure. • Roaming Calls: View the total calls duration on your phone while roaming since the last erasure.
Roaming What is Roaming? Roaming lets you use your R261 phone when you travel outside of your Wireless Carrier’s coverage area. The Roaming icon ( ) displays in the top line of the screen when Roaming is active, and extra charges may apply when making or receiving calls. Note: Some features may be unavailable while roaming. Roaming also consumes additional power from the battery requiring more frequent recharging. Contact your Wireless Carrier for more information about Roaming.
Section 4: Entering Text This section outlines how to select the desired text entry mode when entering characters using the phone keypad. This section also describes how to use the T9 predictive text entry system to reduce the number of key strokes needed to enter text. Changing the Text Entry Mode Text messages can be made up of alphabetical characters, numbers, and symbols.
Using T9® Mode Using Abc Mode T9 Word recognizes commonly used words for the numeric sequence of key presses and inserts the word into your message. T9 Word is much faster than the traditional method of text entry (Abc) and requires only one key press per letter of the word that you’re spelling. 1. While composing a text message, press the Left soft key, then select T9Word. 2. For practice, enter the word “Samsung” by pressing each of the following keys only once: 1.
Entering Symbols Example: Press for D. Enter symbols such as “@” or “%” into a text message. 1. While composing a text message, press the Left soft key, then select Symbols. The first of three symbol screens displays on the screen. 2. Use the Prev and Next soft keys to page through the other symbols, if desired. 3. Press the key that corresponds with the symbol that you wish to enter. 4. Repeat these steps to insert additional emoticon into your message. Adding Words to the T9 Dictionary 1.
Section 5: Understanding Contacts This section details how you can manage your daily contacts by storing their names and numbers in your Contacts list. You can have your Contacts entries sorted by name. Contacts Up to 1000 entries can be stored in Contacts. Each entry can have up to three associated phone numbers and one Email address. Each phone number can be up to 32 digits in length, including 2-Sec or Wait pauses (see “Manual Pause Calling” on page 21.
Finding a Contacts Entry – New Contact: Add a new entry to Contacts. – Erase: Erase the name and associated information. – Send Txt Msg: Create and send a text message to the selected Contact. – Send Pic Msg: Create and send a picture message to the selected Contact. – Call: Dial the number associated with the name. – Send Name Card Via Bluetooth: Send selected Contacts to another Bluetooth device.
– Send Txt Msg: Create and send a text message to the selected Contact. – Send Pic Msg: Create and send a picture message to the selected Contact. – Call: Dial the number associated with the Contact name. – Send Name Card Via Bluetooth: Send the select Contact’s information to another Bluetooth device. • If Voice SVC recognizes the name you said, the Contact entry information for that name displays on the screen.
3. Highlight the searched for Contact. • Press to call the Contact. • Press to view the Contact information. Menu Method 1. Adding a New Contacts Entry You can use either of two methods to add an entirely new entry to Contacts. Dial Method 1. Using the keypad, enter the number you wish to add to your Contacts. Press Save. The following options display on the screen: • Create New: Creates a new Contacts entry. • Update Existing: Adds the number you entered to an existing Contacts entry. 3.
3. Use the Navigation key to review the information for the entry that you wish to change, then press Edit. The Edit Contact screen displays on the screen. Highlight the particular information you want to add or change. • Press to backspace and delete numbers or letters. • Press and hold to clear all numbers or letters in the highlighted field. • Press Options and select one of the following: – Set Speed Dial / Remove speed dial: Assign/remove a speed dial number.
Press Options and select the pause option to add to the number sequence. • Wait: A hard pause (waits for input from you). • 2-Sec Pause: A 2-second pause after which dialing resumes. 4. Press to store the number to Contacts. 3. Pause Dial from Contacts 1. If you stored the number using 2-second pause(s), simply find the Contacts entry, highlight the number, and press . (For more information, refer to “Finding a Contacts Entry” on page 34.) 2.
Saving a Number After a Call 3. Note: If the call was incoming and Caller ID information was unavailable, then the Save option is also unavailable. 1. Press to end your call. The call time, length of call, phone number, and name of the party (if available) display on the screen. Press Save. The Save menu displays on the screen showing the following options: • Create New: Lets you create a new Contacts entry. • Update Existing: Lets you add the number you entered to an existing Contacts entry. 3.
2. After entering the Contacts entry name, do not press Instead, highlight a number field. . Press Options. The following options display on the screen: • Set Speed Dial: Assign a speed dial number. • Set as default: Set the number the phone will dial when Contacts dialing, speed dialing, or voice dialing. • Wait: A hard pause (waits for input from you). • 2-Sec Pause: A 2-second pause after which dialing resumes. (For more information, refer to “Add Pauses to Contacts Numbers” on page 37.) 4.
6. Select an Unassigned Speed Dial number or enter an Unassigned Speed Dial number in the Go To field using the keypad. Important!: Do not enter Speed Call numbers 1, 211, 311, 411, 611, or 911. These numbers are already assigned to Voicemail (001), to Information (411), to Customer Care (611), and to emergency use (911). 7. Press Set. You are prompted to confirm your Speed Dial number assignment. 8. Press Yes to save your Speed Dial assignment and return to the New Contact screen.
3. Highlight the Group field, then press Edit ➔ Set. You are returned to the New Contact/Edit Contact screen and the selected Group name populates the Group field. • Family • Friends 2. Highlight a Group, then press Options. The following options popup in the display: • Send Txt Msg: Send a text message to the selected Group. • Send Pic Msg: Send a picture message to the selected Group. • Rename: Change the name of the selected Group.
5. Press Done when you have marked the Contacts you want to add to the group. “Contact added to group” displays on the screen, followed by the selected Group list including the added Contacts. Remove Contacts Entry from a Group 1. In standby mode, press Menu ➔ Contacts ➔ Group. The Group List screen displays on the screen. 2. Highlight the Group (other than No Group) from which you want to remove a Contact, then press View. A list of the Contacts assigned to the selected Group displays on the screen.
Memory Info The Memory Info menu option lets you view the amount of memory you have used to store Contacts entries, as well as the memory remaining to store more Contacts entries. 䊳 In standby mode, press Info. Menu ➔ Contacts ➔ Memory The Memory Info Contacts screen displays on the screen showing the Total amount of memory in your phone, the amount of memory Used to store Contacts entries, and the remaining (Free) for Contacts entries.
Section 6: Messages This section explains how to send or receive different types of messages. This section also describes the features and functionality associated with messaging. Types of Messages 2. Enter the phone number or Email address of the recipient and press . – or – 3. Your phone is able to send and receive Text messages to compatible phones and devices. Text messages can be up to 160 characters in length.
• Deferred Delivery: Sets a delay time before the phone sends a message. • Delivery Ack: Choose On or Off — Requests confirmation when your message is received. • Add To Contacts: Save the recipient’s number or Email address as a Contacts list entry. • Cancel Message: End composition of this message. You are prompted to choose whether to save this message to your Drafts folder. 7. Press Send when finished entering your message.
Receive Text Messages When you receive a message in standby mode, the ringer sounds (unless turned off) and New Message displays on the screen along with the closed envelope icon ( ). 䊳 Select one of the following, displayed options. • View Now: Opens the message, where you have the option to Forward, Reply With Copy, Save Quick Text, Lock, Add To Contacts, Message Info, or Extract. • View Later: Saves the message to your Inbox, where you can view it later, then returns your phone to standby mode.
View a Text Message Later 1. In standby mode, press Messages ➔ Inbox. The Inbox screen displays on the screen. 2. Select the new message. The new text message displays on the screen in Chat View. (For more information, refer to “Chat View” on page 48.) Chat View Chat View mode is the default format for viewing text messages.
5. Enter a subject for the Picture message using the keypad. (For more information, refer to “Entering Text” on page 30.) 6. Press the Navigation key Down then enter the message text in the Text field using the keypad. (For more information, refer to “Entering Text” on page 30.) Your new picture displays in the Picture field. 7. Highlight the Sound field if you wish to insert a sound into your Picture message, and do the following; otherwise, proceed to step 11. 8. Press Sound.
Send Picture Messages in Standby Mode Send Picture messages to recipients with a compatible phone or other device, and accompany the Picture message with a voice memo, ring tone, or downloaded melody. 3. The Subject field displays on the screen. Enter a subject for the Picture message using the keypad. (For more information, refer to “Entering Text” on page 30.) 4. Press the Navigation key Down until the Text field is highlighted, then enter the message text using the keypad.
10. If you wish to insert a sound into your Picture message, use the Down navigation key to highlight the Sound: field press Sound; otherwise, proceed to step 12. The My Ringtones screen displays on the screen showing the following options: • Record New: Record a new memo to insert into the message. Note: You can record and insert a voice memo of up to 60 seconds in length, if you record first before attaching a picture.
䊳 Select one of the following options: • View Now: Retrieves and opens the message, where you have the option to Erase, Reply, Forward, Save Pic, Save Sound, Save Quick Text, Lock or Add to Contexts. • View Later: Saves the message to your inbox, where you can view it later, then returns your phone to standby mode. • Reject: Rejects the picture message. View a Picture Message Later 1. In standby mode, press Messages ➔ Inbox. The Inbox displays on the screen. 2.
4. • Extract: Calls the sender of the received message. Select an option to invoke its function. • Chat view: – View Last Message: Displays the most recent message exchanged with this sender/addressee in Normal mode. – Add To Contacts: Save the sender’s number to your Contacts. • Normal view: – Forward: Send a copy of this message to another recipient. – Reply With Copy: (Text Msg only) Compose and send a reply message to the originator of the received message and include a copy of the original message.
Press Options and select one of the following: • Reply: Compose and send a reply message to the originator of the received message. • Reply With Copy: Compose and send a reply message to the originator of the received message and include a copy of the original message. • Forward: Send a copy of this message to another recipient. • Lock / Unlock: Block/permit erasure of the highlighted message. • Add To Contacts: Save the sender’s number to your Contacts.
Press Options and select one of the following: • Forward: Send the highlighted message to another recipient. • Resend: Re-send the highlighted message to the original recipient. • Lock / Unlock: Block/permit erasure of the highlighted message. • Add To Contacts: Save the recipient’s number to your Contacts. • Erase Outbox: Delete all unlocked messages from the Outbox. • Message Info: Displays message delivery status, addressee, size, and so on. 4. Select an option to perform its function. 3.
• Delivery Ack: Choose On or Off — Requests confirmation when your message is received. • Add To Contacts: Save the recipient’s number or Email address as a Contacts list entry. • Remove Pic (Pic Msg only): Remove the picture from your message. • Remove Sound (Pic Msg only): Remove the sound file from your message. • Add Slide/Erase Slide (Pic Msg only): Inserts a blank page or erases the inserted slide in this message. • Cancel Message: End composition of this message.
• Listen Later: Returns you to standby mode where you can later choose to call your mailbox and review your messages. Listen to Voicemail Later If you choose to review your voicemail messages at a later time: 1. In standby mode, press Messages ➔ Voicemail. The Voicemail screen displays on the screen, showing the number of new voicemail messages received and the date and time the latest message was received. • Outbox: Deletes all unlocked messages stored in the Outbox.
• Voicemail #: Enter the voicemail number to the voice mailbox answering this dialed number. • Entry Mode: Choose the default method for entering text into messages. • callback #: Choose whether to include a callback phone number with your outgoing messages, and enter the number to include. • Signature: Choose whether to include a text signature in outgoing message text, and enter the text to include.
Section 7: Camera Use your R261 phone to take full color digital pictures, display them on your phone’s vivid color display, and instantly share them with family and friends. It’s fun, and as easy to use as a traditional point-and-click camera. This section explains how you can do the following: • Take pictures with the phone’s built-in digital camera. • Send pictures to others in Picture messages. • Set the options associated with the camera that help you take crisp, clear pictures.
Tip: You can change a number of the camera’s settings to suit particular uses for your pictures. See “Picture Options” on page 63 for more information. When taking pictures of moving subjects or subjects you cannot pose, such as children and pets, the camera’s Multi Shot mode simplifies the process of taking multiple pictures in quick succession.
6. Press Take when the image that you wish to capture displays on the screen. The camera takes one picture (Single Shot or Frame Shot) or multiple pictures in quick succession (Series Shot or Mosaic Shot). The picture displays on the screen. Series Shot 1. 2. Press Mark / Unmark to select/ 3. Press Erase to discard the deselect pictures for erasure. pictures. Press Save to save the picture to memory. Press Send ( ) to send the picture in a picture message. 3. Press Cancel to discard the picture.
• Series Shot: Takes a series ( ) of Take. photos automatically or manually when you press The number of photos taken depends upon the Series Shot setting. • Mosaic Shot: Takes multiple shots individually when you press Take. The number of shots taken depends upon the Divided Shot setting. All shots are combined into a single, mosaic photo. • Frame Shot: Takes one photo each time you press Take. Each photo is surrounded by a selected, colorful frame.
– View Mode: Selections are: - Landscape: Your pictures are wider than they are tall. - Portrait: Your pictures are taller than they are wide. – Shutter Sound: makes a sound when you press the Camera key to take a photo. Selections are: Off, Shutter, OK, or DingDong. – Reset Settings: Yes resets the camera settings to default values. No maintains the current camera settings. Brightness Brightness lets you temporarily lighten the pictures you take.
• Send: Send the currently displayed or highlighted picture as a Picture message. • Set As: Assign the currently displayed or highlighted picture to be standby screen Main Wallpaper, as a Picture ID for someone in your Contacts list, or as Front Wallpaper. • Erase Images: Erase selected unlocked pictures in the Picture Gallery. Locked pictures must be unlocked before you can erase them. • Rename: Rename the currently displayed or highlighted picture.
Section 8: Brew The Brew application allows you to download full featured applications over the air including games, personalized ring tones, pictures, and more. You can send and receive instant messages and email, or browse the web to catch up on all the latest news. For more information, contact your Wireless Carrier. Launching Brew 1. In standby mode, press Menu ➔ Brew ➔ Brew. The Brew menu displays on the screen as shown.
Section 9: Multimedia and Web This section outlines your phone’s multimedia and web functions. Accessing Multimedia 1. In standby mode, press Menu, then select Multimedia. The following sub-menus display on the screen: • Camera: Lets you launch and set up your phone’s camera. (For more information, refer to “Camera” on page 59.) • My Images: Lets you choose the pictures that display on your phone’s screen or in picture messages.
– Set As: Assign the selected picture as the Main Wallpaper, as the Picture ID for a Contact, or as the Front Wallpaper. – Erase Images: Erases one or more selected images. – Rename: Change the file name of the selected image. – Lock / Unlock: Prevent/permit deletion of the selected image. – Slide Show: View your images as an automatic slide show. – Image Info: Displays information about the selected image, such as the file Name, creation Date and Time, Resolution, and the data Size. 3.
Lock / Unlock: Prevent/permit deletion of the highlighted file. Erase: Delete the highlighted file. Rename: Change the name of the highlighted file. Ringtone Info: Displays information about the selected file, such as the file name, the file type, and the data size. Press to return to the previous menu. – – – – 3. 1. From the Multimedia menu, select My Ringtones ➔ Record New. The Record New screen displays on the screen. 2. Press Rec, then start speaking.
Note: For more information, contact your Wireless Carrier. Launching Brew 䊳 In standby mode, press Note: Air time charges may apply. Please check with your Wireless Carrier. 2. Press Continue and browse. Menu ➔ Brew ➔ Brew. The Brew menu displays on the screen as shown. Applications Shopping and Downloading (Brew) Download games, ring tones, e-mail, and more using Mobile Shop. Note: For information on airtime charges, contact your Wireless Carrier.
Section 10: Tools This section explains how to use your phone’s productivity assistance tools and utilities to schedule events, set reminders, perform calculations, and more. Tools Menu Tools is a suite of Personal Information Manager (PIM) applications such as a Calendar, and Memo Pad that run on your phone. You can use your phone to schedule events, set reminders, perform calculations, and more with the functions provided by this useful feature. Opening Tools Menu 1. In standby mode, press Menu ➔ Tools.
Registered List Registered List provides a list of Bluetooth wireless technology devices previously connected to your handset. 䊳 In standby mode, press Menu ➔ Tools ➔ Bluetooth ➔ Registered List. The Bluetooth screen displays on the screen showing a list of devices previously connected to your device. “Place device you are connecting to in discoverable mode” displays on the screen. 3. Place the Bluetooth device with which you are connection in discoverable mode.
7. Press Yes to connect with the device now. • Supported Profiles: Lists and explains the Bluetooth profiles supported by your phone. • Device Info: Displays the Bluetooth Type, Status, and Address of your phone. – or – Press No to connect with the device at a later time. Connecting to a Bluetooth Device From the Registered List, 1. In standby mode, press Menu ➔ Tools ➔ Bluetooth ➔ Registered List. 2. Select the desired device.
3. Press Options while viewing the calendar to access other options: • Go to Date: Lets you jump to any date you specify. • Go to Today: Lets you jump to today’s date. • Weekly: Switches from a full month calendar to a single week calendar. • Erase Old: Lets you erase past events. • Erase All: Lets you erase all events. Select the desired option to perform the related process. 4. Press to open the highlighted date. A list of scheduled events displays on the screen. 5. Select the desired event.
9. Highlight the Reminder field, and set the Reminder to Off or to select a reminder interval. View, Edit, and Erase Memos 1. In standby mode, press Menu ➔ Tools ➔ Memo Pad. A list of your stored memos displays on the screen. 2. Highlight the desired memo. 3. To view the memo, press 4. To edit the memo you are viewing, press Edit. 10. Highlight the Alert time field, then select the amount of time before the event occurs that you wish to be notified. 11.
Press Add and create a new alarm. A Set Alarm 1 screen displays the following: • Alarm • Time • Frequency • Ringer 3. Highlight the options you wish to change, then select values for the options. The alarm icon remains at the top of the display under 2. Use the keypad to enter the Time for the alarm. 4. Press when you’re finished entering and selecting values for the alarm. The Alarm Clock icon ( ) displays at the top of the screen.
2. Highlight an existing alarm. 3. Press Options. Select from the following options: • On / Off: Enables or disables the highlighted alarm while retaining the current settings. • Add new alarm: Define a new alarm. • Erase this alarm: Deletes the highlighted alarm. • Erase All: Deletes all alarms. World Time World Time lets you view the time of day or night in another part of the world. World Time displays time in the 24 different time zones around the world. 1.
Hawaii 3. Alaska San Francisco Los Angeles Do one of the following: • Press DST On [the DST on icon ( ) displays] to display Daylight Savings Time (DST) for the displayed time zone or press DST Off to display standard time. • Press Options and select Set as Home Zone to set the displayed time zone as the home time zone for your phone. You are prompted to confirm the Home Zone change. Press Yes to save your change. The Home Zone marker moves to the displayed time zone.
Stop Watch You can use this menu to set a stop watch. • Temperature To convert a currency, length, weight, volume, area, or temperature, do the following: 1. In standby mode, press Menu ➔ Tools ➔ Stop Watch. 1. 2. Press to Start, Stop, and continue the stopwatch count. In standby mode, press Menu ➔ Tools ➔ Converter. 2. 3. Press Record at the start of each succeeding event/lap to record the completion time for the previous event/lap. Select the conversion feature to use.
Currency — Reviewing/Editing Exchange Rates The Currency Converter includes long-term average exchange rates as default values. To review and/or change a default exchange rate to the current exchange rate, do the following: Menu ➔ Tools ➔ Converter 1. In standby mode, press ➔ Currency. 2. Press Rate. The Exchange Rate list for the USD (U.S. Dollars) currency displays on the screen. 7. Press Cancel to discard your changes and return to the Currency Converter screen.
7. Highlight the Exchange Rate field and enter a decimal exchange rate for the new currency using the keypad. (For more information, refer to “Entering Numbers” on page 31.) Note: Press Press to save the new exchange rate. The Exchange Rate list for the USD (U.S. Dollars) currency displays on the screen with your new exchange rate at the bottom of the list.
Voice Commands To start Voice SVC, do one of the following: • In standby mode, press and hold . “Say a Command” displays on the screen and is pronounced through the earpiece, followed by a list of available commands. • In standby mode, press Menu ➔ Voice SVC ➔ Voice Command. – Lookup: Lets you look up and display contact information for any name stored in your Contacts list by saying the name. (For more information, refer to “Finding a Contacts Entry” on page 34.
Ending Calls Before Restarting Voice SVC When you use Voice SVC to make a call, you must end that call before you can use Voice SVC again. Voice Settings Choice Lists Voice SVC uses choice lists when it is not confident it has correctly recognized a name or number. In this case, it can display a list of up to three possible choices, and prompt you to confirm the correct one. You can change the way that Voice SVC uses choice lists with name dialing, digit dialing, and contacts.
Tips for Adapting Digit Dialing • Use Adapt Digits in a quiet place. • Make sure you wait for the beep before starting to speak. • Speak clearly, and say each digit distinctly. • If you make a mistake while recording a sequence of digits, or if there is an unexpected noise that spoils the recording, re-record that sequence. • Only adapt digits if you are regularly having problems with digit dialing. Once you adapt, digit dialing will not work as well for other people using your phone.
Sound About Voice SVC Sound lets you specify what (if any) text prompts you want your phone to read to you through the earpiece. 1. In standby mode, press Menu ➔ Voice SVC, then select Voice Settings ➔ Sound. 2. Select the desired option and setting: select Voice Settings ➔ About. • • • • The About Nuance screen displays on the screen showing the version level of the Voice SVC (Vsuite) software currently installed on your phone. Prompts: Enables (On) or disables (Off) playing of prompts.
Section 11: Changing the Phone Settings This section explains how to customize your call and phone settings to suit your needs and preferences. • Phone Info: Access information about your phone, such as your phone number, meanings of phone status icons, hardware and software versions, and more. (Some of this information is valuable to you if you need to call for customer support.) Accessing Your Phone’s Settings 1. In standby mode, press Menu ➔ Settings.
Display Settings This section shows you how to change your phone’s menu appearance, display brightness and contrast, and display content to better meet your needs. To access the Display Settings sub-menu, do the following: 䊳 In standby mode, press Menu ➔ Settings ➔ Display Settings. The Display Settings sub-menu displays on the screen. The following sub-sections detail the available Display Settings.
2. Select the desired theme, then press to save your setting. • Samsung • Celestial Dialing Font Size Lets you select the size of your dialing font. Note: The Clock Format setting for the Front Clock automatically changes to Samsung when you change the Wallpaper setting for the Front Display. (For more information, refer to “Wallpaper” on page 86.) A “Clock Format Set” message displays on the screen, and you are returned to the Clock Format menu.
Backlight Front Contrast You can set the backlight for your display or keypad to remain on for a specified period of time or remain on as long as the folder is open. Note: Prolonged backlight use drains your battery faster. Front Contrast lets you choose the display contrast to suit yourself. In standby mode, press Settings ➔ Front Contrast. 2. Use the Left/Right navigation keys to sample any of the 21 display contrast settings from -50 to +50. The screen displays the effects of each new setting.
The following sub-sections detail the available Sound Settings: Master Volume Use the Master Volume option to set the volume for incoming calls and alarms. 1. In standby mode, press Menu ➔ Settings ➔ Sound Settings ➔ Master Volume. 2. Use the Navigation key or the Volume key (on the left side of your phone) to change the volume level (Silence All, Vibrate, Low, Low/Medium, Medium, Medium/High, High). Tip: You can add vibration to Master Volume settings Low – High. Just press Vib.on ( ).
Alerts 2. 1. In standby mode, press Settings ➔ Alerts. Menu ➔ Settings ➔ Sound Select the desired option: • Minute Beep: Sound an alert ten seconds before each elapsed minute of a call. • Roam/SVC Alert: Sound an alert when you leave your home service area while on a call. • Call Connect: Sound an alert when you connect a call. • Power On/Off: Play melodies when you turn your phone on or off. • Voice Privacy Alert: Sound an alert when Voice Privacy is turned on. 3.
1. In standby mode, press Settings ➔ Call Answer. 2. Select a Call Answer method: Menu ➔ Settings ➔ Call • Any Key: Press any key except the , , or Left soft key to answer an incoming call. • Send Key: Press to answer an incoming call. • Flip Open: Flip open the phone to answer an incoming call. Tip: You can set your phone to answer calls automatically, without any input from you. (For more information, refer to “Auto Answer” on page 91.
TTY Mode Your phone is fully TTY compatible. TTY equipment is connected to your phone through the headset connector on the right side of the phone. TTY Mode must be enabled before you can use your phone with a TTY device. 1. In standby mode, press Menu ➔ Settings ➔ Call Settings ➔ TTY Mode. You are prompted to confirm you want to change the current TTY Mode setting. Note: The “Enabling TTY may impair headset use and non-TTY accessory performance” message pops up when you select TTY Mode. 2.
Phone Settings The Phone Settings options let you tailor your phones basic operations. To access the Phone Settings sub-menu, do the following: 䊳 In standby mode, press Menu ➔ Settings ➔ Phone Settings. The Phone Settings sub-menu displays on the screen. The following sub-sections detail the available Phone Settings. Airplane Mode When set to On, Airplane Mode disables all radio functions of your phone.
Lock Phone Locking the phone limits all outgoing calls except calls to 911 emergency and the three user-programmable emergency numbers. You can lock the phone manually during use, or set the phone to lock automatically when it is turned on. With the phone in lock mode, you can answer incoming calls, but you must unlock the phone to place outgoing calls (except to emergency and secret numbers). 1. In standby mode, press Menu ➔ Settings ➔ Phone Settings ➔ Security ➔ Lock Phone. 2.
Store Emergency Numbers Note: Emergency number 911 is hard-coded into the phone. 911 is available any time, even when the phone is locked or restricted. If you call 911 a tone plays and an Emergency prompt displays for the call duration. 1. At the Security sub-menu, select Emergency #. 2. Select one of three emergency number entries. 3. Enter an emergency number (up to 32 digits in length). 4. Press to save the number entered.
Restriction Restriction lets you limit the use of your phone to make outgoing calls and/or to receive incoming calls to any numbers, to no numbers, or to calls from/to your Contacts. 1. In standby mode, press Menu ➔ Settings ➔ Phone Settings ➔ Security ➔ Restriction. 2. Select the type of calls or messages you want to allow or restrict. • Calls: Select restrictions for Incoming and Outgoing voice calls. • SMS Messages: Select restrictions for Incoming and Outgoing Text messages.
Set Time Speed Dial Use the Set Time option to set the current date and time. Note: In digital service mode, the Set Time feature is disabled. The network adjusts time and date automatically. 1. In standby mode, press Settings ➔ Set Time. 2. Select an option: Tip: Disabling Speed Dial also disables the Voicemail key function. (For more information, refer to “Voicemail Key” on page 11 and to “Setting Up Your Voicemail” on page 8.
For example, to search for “Sally” you could enter: 2. Press to return to the Settings menu. Phone Info S A L 2. Press the Up navigation key. The Find screen displays on the screen showing the Contacts entries with names that correspond to your key entries. 3. Highlight the desired Contacts entry. 4. Press to call the highlighted Contact. Memory Info The Memory Info screen lets you review your phone’s available memory and helps you manage your files stored there. 1.
Section 12: Health and Safety Information This section outlines the safety precautions associated with using your phone. The terms “mobile device” or “cell phone” are used in this section to refer to your phone. Read this information before using your mobile device. Exposure to Radio Frequency (RF) Signals The U.S. Food and Drug Administration (FDA) has published information for consumers relating to Radio Frequency (RF) exposure from wireless phones.
While RF energy does not ionize particles, large amounts can increase body temperatures and cause tissue damage. Two areas of the body, the eyes and the testes, are particularly vulnerable to RF heating because there is relatively little blood flow in them to carry away excess heat. Research Results to Date: Is there a connection between RF and certain health problems? The results of most studies conducted to date say no.
Risk of Brain Cancer from Exposure to Radio Frequency Fields in Childhood and Adolescence (MOBI-KIDS) MOBI-KIDS is an international study investigating the relationship between exposure to radio frequency energy from communication technologies including cell phones and brain cancer in young people. This is an international multi-center study involving 14 European and non-European countries. Additional information about MOBI-KIDS can be found at http://www.creal.
Hands-Free Kits Hands-free kits may include audio or Bluetooth® headsets and various types of body-worn accessories such as belt-clips and holsters. Combinations of these can be used to reduce RF energy absorption from cell phones. Headsets can substantially reduce exposure because the phone is held away from the head in the user's hand or in approved body-worn accessories. Cell phones marketed in the U.S.
• FCC RF Safety Program: http://www.fcc.gov/oet/rfsafety/. • Environmental Protection Agency (EPA): http://www.epa.gov/radtown/wireless-tech.html. • Occupational Safety and Health Administration (OSHA): http://www.osha.gov/SLTC/radiofrequencyradiation/. (Note: This web address is case sensitive.) • National Institute for Occupational Safety and Health (NIOSH): http://www.cdc.gov/niosh/. • World Health Organization (WHO): http://www.who.int/peh-emf/en/.
maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Before a new model phone is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the exposure limit established by the FCC. Tests for each model phone are performed in positions and locations (e.g.
Check the laws and regulations on the use of mobile devices and their accessories in the areas where you drive. Always obey them. The use of these devices may be prohibited or restricted in certain areas. For example, only hands-free use may be permitted in certain areas. Before answering calls, consider your circumstances. Let the call go to voicemail when driving conditions require.
phone and/or battery get wet, have them checked by your service provider or contact Samsung, even if they appear to be working properly. • Do not place your battery in or near a heat source. Excessive heating can damage the phone or the battery and could cause the phone or the battery to explode. Do not dry a wet or damp battery with an appliance or heat source such as a microwave oven, hair dryer, iron, or radiator. Avoid leaving your phone in your car in high temperatures.
Samsung Mobile Products and Recycling Samsung cares for the environment and encourages its customers to recycle Samsung mobile devices and genuine Samsung accessories. Proper disposal of your mobile device and its battery is not only important for safety, it benefits the environment. Batteries must be recycled or disposed of properly. Recycling programs for your mobile device, batteries, and accessories may not be available in your area.
Warning!: Never dispose of batteries in a fire because they may explode. UL Certified Travel Charger The Travel Charger for this phone has met applicable UL safety requirements. Please adhere to the following safety instructions per UL guidelines: FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD TO SERIOUS PERSONAL INJURY AND POSSIBLE PROPERTY DAMAGE. IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS. DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS.
GPS & AGPS Certain Samsung mobile devices can use a Global Positioning System (GPS) signal for location-based applications. A GPS uses satellites controlled by the U.S. Government that are subject to changes implemented in accordance with the Department of Defense policy and the 2008 Federal Radio navigation Plan (FRP). Changes may affect the performance of location-based technology on your mobile device.
Emergency Calls This mobile device, like any wireless mobile device, operates using radio signals, wireless and landline networks, as well as user-programmed functions, which cannot guarantee connection in all conditions, areas, or circumstances. Therefore, you should never rely solely on any wireless mobile device for essential communications (medical emergencies, for example). Before traveling in remote or underdeveloped areas, plan an alternate method of contacting emergency services personnel.
Dust and dirt Do not expose your mobile device to dust, dirt, or sand. Cleaning solutions Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the mobile device. Wipe it with a soft cloth slightly dampened in a mild soap-and-water solution. Shock or vibration Do not drop, knock, or shake the mobile device. Rough handling can break internal circuit boards. Paint Do not paint the mobile device.
• Do not turn the volume up to block out noisy surroundings. If you choose to listen to your portable device in a noisy environment, use noise-cancelling headphones to block out background environmental noise. By blocking background environment noise, noise cancelling headphones should allow you to hear the music at lower volumes than when using earbuds. • Limit the amount of time you listen. As the volume increases, less time is required before you hearing could be affected.
National Institute for Occupational Safety and Health (NIOSH) 395 E Street, S.W. Suite 9200 Patriots Plaza Building Washington, DC 20201 Voice: 1-800-35-NIOSH (1-800-356-4674) 1-800-CDC-INFO (1-800-232-4636) Outside the U.S. 513-533-8328 Email: cdcinfo@cdc.gov Internet: http://www.cdc.gov/niosh/topics/noise/default.
For more information see: http://www.fcc.gov/oet/rfsafety/rffaqs.html#. Other Medical Devices If you use any other personal medical devices, consult the manufacturer of your device to determine if it is adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information. Switch your mobile device off in health care facilities when any regulations posted in these areas instruct you to do so.
The intent of the HAC Act is to ensure reasonable access to telecommunications services for persons with hearing disabilities. While some wireless mobile devices are used near some hearing devices (hearing aids and cochlear implants), users may detect a buzzing, humming, or whining noise. Some hearing devices are more immune than others to this interference noise, and mobile devices also vary in the amount of interference they generate.
usage” while using their hearing aid with the particular wireless mobile device. “Normal usage” in this context is defined as a signal quality that is acceptable for normal operation. The M mark is intended to be synonymous with the U mark. The T mark is intended to be synonymous with the UT mark. The M and T marks are recommended by the Alliance for Telecommunications Industries Solutions (ATIS). The U and UT marks are referenced in Section 20.19 of the FCC Rules.
• Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the mobile device, its parts, or accessories. • For vehicles equipped with an air bag, remember that an air bag inflates with great force. Do not place objects, including installed or portable wireless equipment near or in the area over the air bag or in the air bag deployment area. If wireless equipment is improperly installed and the air bag inflates, serious injury could result.
Section 13: Warranty Information Standard Limited Warranty What is Covered and For How Long? SAMSUNG TELECOMMUNICATIONS AMERICA, LLC ("SAMSUNG") warrants that SAMSUNG's handsets and accessories ("Products") are free from defects in material and workmanship under normal use and service for the period commencing upon the date of purchase by the first consumer purchaser and continuing for the following specified period of time after that date: Phone 1 Year Batteries 1 Year Case/Pouch/Holster 90 Days Othe
What are SAMSUNG's Obligations? During the applicable warranty period, provided the Product is returned in accordance with the terms of this Limited Warranty, SAMSUNG will repair or replace the Product, at SAMSUNG'S sole option, without charge. SAMSUNG may, at SAMSUNG's sole option, use rebuilt, reconditioned, or new parts or components when repairing any Product, or may replace the Product with a rebuilt, reconditioned or new Product.
SAMSUNG MAKES NO WARRANTIES OR REPRESENTATIONS, EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, AS TO THE QUALITY, CAPABILITIES, OPERATIONS, PERFORMANCE OR SUITABILITY OF ANY THIRD-PARTY SOFTWARE OR EQUIPMENT USED IN CONJUNCTION WITH THE PRODUCT, OR THE ABILITY TO INTEGRATE ANY SUCH SOFTWARE OR EQUIPMENT WITH THE PRODUCT, WHETHER SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT IS INCLUDED WITH THE PRODUCT DISTRIBUTED BY SAMSUNG OR OTHERWISE.
of any award, but may not grant SAMSUNG its attorney fees, expert witness fees or costs unless it is determined that the claim was brought in bad faith. In a Small Claim case, you shall be required to pay no more than half of the total administrative, facility and arbitrator fees, or $50.00 of such fees, whichever is less, and SAMSUNG shall pay the remainder of such fees.
No reproduction in whole or in part allowed without prior written approval. Specifications and availability subject to change without notice. [060111] End User License Agreement for Software IMPORTANT. READ CAREFULLY: This End User License Agreement ("EULA") is a legal agreement between you (either an individual or a single entity) and Samsung Electronics Co., Ltd. for software owned by Samsung Electronics Co., Ltd.
use this information solely to improve its products or to provide customized services or technologies to you and will not disclose this information in a form that personally identifies you. 5. UPGRADES. This EULA applies to updates, supplements and add-on components (if any) of the Software that Samsung may provide to you or make available to you after the date you obtain your initial copy of the Software, unless we provide other terms along with such upgrade.
this mobile device to any names, marks, products, or services of any third-parties are provided solely as a convenience to Purchaser, and do not constitute or imply an endorsement, sponsorship, or recommendation of, or affiliation with the thirdparty or its products and services.
THE THRID-PARTY APPLICATION, THAT THE FUNCTIONS CONTAINED IN THE THIRD-PARTY APPLICATION WILL MEET PURCHASER'S REQUIREMENTS, THAT THE OPERATION OF THE THIRD-PARTY APPLICATION WILL BE UNINTERRUPTED OR ERROR-FREE, OR THAT DEFECTS IN THE THIRD-PARTY APPLICATION WILL BE CORRECTED. PURCHASER ASSUMES THE ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR, OR CORRECTION.
International Sale of Goods, the application of which is expressly excluded. If a dispute, controversy or difference is not amicably settled, it shall be finally resolved by arbitration in Seoul, Korea in accordance with the Arbitration Rules of the Korean Commercial Arbitration Board. The award of arbitration shall be final and binding upon the parties. 14. ENTIRE AGREEMENT; SEVERABILITY.
Index Numerics 2-Sec Pause 37 C A Activating Your Phone 8 Adding Contacts Dial Method 36 Menu Method 36 Adjust key beep 90 Ringer Setting 17 Alerts 90 B Battery Charging 7 Installing 5 Low Battery Indicator 8 Removing 6 Battery Use & Safety 105 Brew Applications Shopping and Downloading 65 69 Launching 65 69 , Browser introduction 69 , Call Functions Adjusting the Call Volume 24 Call Settings 90 Auto Answer 91 Auto Retry 91 Call Answer 90 TTY Mode 92 Camera My Images 63 Picture Options 63 Camera Mode
Front Contrast 88 Theme 87 Wallpaper 86 Do cell phones pose a health hazard? GPS & AGPS 109 99 Installing the Battery 5 International Calls 20 E Editing Contacts Add Pauses 37 Assigning a Ringtone 38 Changing Speed Dial Numbers 41 Email Address 38 Name and Numbers 36 Names and Numbers 36 Emergency Calls 20 110 Exposure to Radio Frequency (RF) Signals 99 , F FCC Hearing Aid Compatibility (HAC) Regulations for Wireless Devices 114 FCC Notice and Cautions 116 Finding Contacts Shortcut Key Method 34 Voice
Security 93 Picture Messages Online Viewing 52 Receiving 51 Send in Camera Mode 48 Powering the Phone Off 8 On 8 Q Quick Search contact search 97 R Receive Pic.
U UL Certified Travel Charger 108 Use the Travel Adapter 7 V Vibrate Mode 17 Voice SVC 80 About Voice SVC 84 Choice Lists 82 Digit Dialing 82 Sensitivity 82 Sound 84 Voice Commands 81 Voice Launch 84 Voicemail Listen 9 57 Setup 8 , W Wallpaper 86 Warranty Information 118 130
