User Manual

E-17
Airing Your Room
Adjusting the Air Flow Direction
If the atmosphere in your room is stale, you can air it using the
FAN feature.
If necessary, press (ON/OFF) button.
Result:
◆ The On/Off indicator on the wired remote controller comes on.
◆ The air conditioner runs in the mode selected when the unit
was last used.
1
Select the fan speed by pressing the Fan button one or more times until
the intended value is displayed:
3
To control the direction of the air flow, refer to below.
4
Depending on the position of the indoor unit, you can adjust the posi-
tion of the air flow blades, thus increasing the efficiency of the air con-
ditioner.
Press the Swing button.
Result:
The blades are moving between up and down.
1
To stop the blades, press the Swing button again.
To set to the required position, press the Swing button again.
When the blades are in the required position.
2
When the air conditioner is first turned on, the blades are
moved.
IMPORTANT
You can also adjust by the hands the blades which are not
operated by the Swing button.
N
N
o
o
t
t
e
e
Low
Medium
High
To select the FAN mode, press the Mode button until is displayed at
the top of the wired remote controller.
Result:
◆ The air conditioner runs in FAN mode.
2
ENGLISH