Specifications

Disassembly and Reassembly
Samsung Electronics 3-27
3-7-3 Housing Ass’y Removal
(1) Remove Belt .
(2) Push the Hook in the direction arrow “A” and lift up Pulley Gear .
(3) Push the Slider Housing in the direction arrow “B” and lift up the Gear Tray .
(4) Lift up the Slider Housing .
(5) Remove the soldering of 2 points (Red, Black).
(6) Remove 2 Screws and lift dowm the Motor Load Assy .
(7) Push the 3 Hooks bottom side in the direction arrow “C” and lift up the Housing PCB .
(8) Push the Hooks and remove Deck PCB .
Fig. 3-7-3 Housing Ass’y Removal
"C"
"C"
"C"