Specifications

JOHNSON CONTROLS

Form 201.28-NM1.EN.PED/CE (0211)

UNIT REMOVAL FROM SHIPPING CONTAINER

1. Place a clevis pin into the holes provided at the end

of each base rail on the unit. Attach chains or nylon

straps through the clevis pins and hook onto a suit-

able lift truck for pulling the unit out of the container.

(chain shown)

2. Slowly place tension on the chains or straps until the

unit begins to move and then slowly pull the unit from

the container. Be sure to pull straight so the sides do

not scrape the container.

3. Place a lifting ﬁ xture on the forks of the lift truck and

reattach the chain or strap. Slightly lift the front of

the unit to remove some weight from the ﬂ oor of the

container. Continue pulling the unit with an operator

on each side to guide the lift truck operator.

4. Pull the unit until the lifting locations are outside of

the container. Place 4 X 4 blocks of wood under the

base rails of the unit. Gently rest the unit on the blocks

and remove the chains and lift truck.

5. Attach lifting rigging from the crane and slowly

complete the removal from the container then lift up

and away.