Specifications

14
EN
Multistage Cooking
Your microwave oven can be programmed to cook food in up to three
stages (the Convection , Microwave+Convection and Fast Preheat mode
can not be used in Multistage cooking). Example: You wish to Power
defrost food and cook it without having to reset the oven after each stage.
You can thus defrost and cook a 1.8 kg chicken in three stages:
• Defrosting
• Microwave cooking for 30 minutes
• Grill for 15 minutes
 Defrosting must be the first stage. Combination and Grill can only be
used once during the remaining two stages, However microwave can
be used twice(at two different power levels).
Fast Preheating the Oven
For convection cooking, it is recommended that you preheat the oven to
the appropriate temperature before placing the food in the oven.
When the oven reaches the requested temperature, it is maintained for
approximately 10 minutes; it is then switched off automatically.
Check that the heating element is in the correct position for type of
cooking that you require.
 In case the inner temperature has reached the preset
temperature, the beeps 6 times when temperature and the preset
temperature is kept for 10 minutes.
 If you would like to know the current temperature of oven cavity,
press
Fast Preheat ( ) button.
1. Press the Power Defrost ( ) button.
2. Select the type of food that you are cooking by pressing
the Power Defrost ( ) button.
3. Set the weight by pressing the
() and () buttons the
appropriate number of times (1800 g in the example).
4. Press the Microwave ( ) button.
5. Set the microwave power level by pressing the Microwave
( ) button to select the appropriate Power Level
(450W in the example).
6. Set the cooking time by pressing the
() and () buttons.
(30 minutes in the example)
7. Press the Grill ( ) button.
8. Set the cooking time by pressing the
() and () buttons.
(15 minutes in the example).
9. Press Start button.
Result:
Cooking starts:

When cooking has finished, the oven will beep
and flash “0” four times. The oven will then
beep one time per minute.
1. Press the Fast Preheat button.
Result: The following indications are displayed:
250°C (temperature)
2. Press the Fast Preheat button one or more times to set
the temperature.
3. Press the Start button.
Result:
The oven is preheated to the requested
temperature.

The display times are 8 seconds for the
selected cooking mode and 2 seconds for the
preset temperature in sequence.
Ex) In fast preheat mode at 200°C
(displayed for 8 seconds) (displayed for 2 seconds)
 Upon arrival at the preset temperature, the
oven beeps 6 times and the temperature is
kept for 10 minutes.
 After 10 minutes, the beeps 4 times and the
operation stops.
jlXW^WT{zl|TWZXZ]mluUGGwGX[GGtSGhGYWSGYWW^GGXa\[Gwt
Downloaded From Microwave-Manual.com Manuals