Specifications

-SAMSUNG SDI Confidential Proprietary –
Spec. No. ICR18650-26C Version No. 1.0
9
1-8 Mechanical guides.
- PCBA and Cell stack should have heat insulation material between them.(Such
as plastic barrier which is giving air isolation or non-thermal conductive
material.)
- B+ and B- wire connection should not be crossed each other. Do not make wire
which had the voltage difference more than 4.0V get together.
- The material such as double sided tape and rubber which are used in battery
pack should be verified for its flammability
If Pack cannot meet above requirement,
we cannot take responsibility for quality issue.