Ⅰ. SPECIFICATION 1. CAMERA SPECIFICATION Image Sensor - Type : 1/2.5" CCD - Effective Pixel : ·S860 : Approx. 8.1 Mega-pixel ·S760 : Approx. 7.2 Mega-pixel - Total Pixel : ·S860 : Approx. 8.3 Mega-pixel ·S760 : Approx. 7.2 Mega-pixel Lens - Focal Length : SHD Lens f = 6.3 ~ 18.9mm (35mm film equivalent : 38 ~ 114mm) - F No. : F2.8(W) ~ F5.2(T) - Digital Zoom :·Still Image mode :1.0X ~ 3.0X ·Play mode : Play mode : 1.0X ~ 12.8X (depends on image size) LCD Monitor - 2.
Ⅰ. SPECIFICATION Date Imprinting - Date, Date & Time, Off (user selectable) Shooting - Still Image : ·Mode : Auto, Program, Manual, DIS, Photo Help Guide , Portrait, Scene ·Scene : Night, Children, Landscape, Close-up, Text, Sunset, Dawn, Backlight, Firework, Beach & Snow ·Self-timer : 10 sec., 2 sec.
Ⅰ.
Ⅰ. SPECIFICATION 2. System Requirements For Windows PC with processor better than Pentium 450MHz (Pentium 800MHz recommended) Windows 98SE / 2000 / ME / XP/Vista Minimum 128MB RAM (Over 512MB recommended) 200MB of available hard disk space (Over 1GB recommend) For Macintosh Power Mac G3 or later Mac OS 9.2 ~ 10.
Ⅰ. SPECIFICATION 3. The capacities of the memory card The camera can use SD/SDHC Memory Cards and MMC (Multi Media Cards). ● The SD/SDHC memory card has a write protect switch that Card pins prevents image fi les from being deleted or formatted. By sliding the switch to the bottom of the SD/SDHC memory card, the data Write protect switch will be protected. By sliding the switch to the top of the SD/SDHC memory card, the data protection will be cancelled.
Ⅰ. SPECIFICATION 4.
Ⅰ. SPECIFICATION No.
Ⅰ. SPECIFICATION 5.
Ⅰ. SPECIFICATION 6.
Ⅰ.
Ⅱ. INSTALLATION 1. About the software After inserting the CD-ROM provided with this camera into the CD-ROM drive, the following window should automatically run. Before connecting the camera to the PC, you should first install the camera driver. ■ Camera driver : This enables images to transfer between the camera and PC. This camera uses the USB Storage Driver as the camera driver. You can use the camera as a USB card reader.
Ⅱ. INSTALLATION 2. Setting up the application software To use this camera with a PC, install the application software first. After this has been done, the stored images in the camera can be moved to the PC and can be edited by an image editing program. 1. The auto run frame will display. Click the [Samsung Digital Camera Installer] menu in the Auto run frame. 2. Install the camera driver, DirectX, Samsung Master and Adobe Reader by selecting a button shown on the monitor.
Ⅱ.
Ⅱ. INSTALLATION 3. After restarting the computer, connect the PC to the camera with the USB cable. 4. Turn the camera power on. The [Found New Hardware Wizard] will open and the computer will recognise the camera. ※ If your OS is Windows XP/ Vista, an image viewer program will open. If the download window of Samsung Master opens after starting Samsung Master, the camera driver was set up successfully. ● If you have installed the camera driver, the [Found New Hardware Wizard] may not open.
Ⅱ. INSTALLATION 3. USB : FAQ Please check the following if the USB connection malfunctions. Case 1 USB cable is not connected or it is not the supplied USB cable. → Connect the supplied USB cable. Case 2 The camera is not recognised by your PC. Sometimes, the camera may appear under [Unknown Devices] in Device Manager. → Install the camera driver correctly. Turn off the camera, remove the USB cable, plug in the USB cable again, and then turn on the camera.
Ⅲ. EXPLODED VIEW AND PART LIST 1.
Ⅲ. EXPLODED VIEW AND PART LIST ▶ PARTS LIST Fig.No 1-1 1-2 Old Parts No. New Parts No.
Ⅲ. EXPLODED VIEW AND PART LIST 2.
Ⅲ. EXPLODED VIEW AND PART LIST ▶ PARTS LIST Fig.No Old Parts No. New Parts No.
Ⅲ. EXPLODED VIEW AND PART LIST ▶ PARTS LIST Fig.No New Parts No.
Ⅲ. EXPLODED VIEW AND PART LIST ▶ PARTS LIST Fig.No Old Parts No. New Parts No.
Ⅲ. EXPLODED VIEW AND PART LIST 3.
Ⅲ. EXPLODED VIEW AND PART LIST ▶ PARTS LIST Fig.No Old Parts No. New Parts No.
Ⅲ. EXPLODED VIEW AND PART LIST ▶ PARTS LIST Fig.No 3-9 28 Old Parts No. New Parts No.
Ⅲ. EXPLODED VIEW AND PART LIST ▶ PARTS LIST Fig.No 3-9 Old Parts No. New Parts No.
Ⅲ. EXPLODED VIEW AND PART LIST 4.
Ⅲ. EXPLODED VIEW AND PART LIST ▶ PARTS LIST Fig.No Old Parts No. New Parts No.
Ⅲ. EXPLODED VIEW AND PART LIST 5.
Ⅲ. EXPLODED VIEW AND PART LIST ▶ PARTS LIST Fig.No Old Parts No. New Parts No.
Ⅲ. EXPLODED VIEW AND PART LIST ▶ PARTS LIST Fig.No Old Parts No. New Parts No.
Ⅲ. EXPLODED VIEW AND PART LIST ▶ PARTS LIST Fig.No Old Parts No. New Parts No.
Ⅲ. EXPLODED VIEW AND PART LIST 6.
Ⅲ. EXPLODED VIEW AND PART LIST ▶ PARTS LIST Fig.No Old Parts No. New Parts No.
Ⅲ. EXPLODED VIEW AND PART LIST ▶ PARTS LIST Fig.No Old Parts No. New Parts No.
Ⅲ. EXPLODED VIEW AND PART LIST ▶ PARTS LIST Fig.No Old Parts No. New Parts No. Parts Name Q6901300901A AD69-01588A GT_BOX_D760_EXP_AUS_Silver 1 O Q6901301001A AD69-01589A GT_BOX_D760_USA_Silver 1 O Q6901301101A AD69-01590A GT_BOX_D760_CAN_Silver 1 O Q6901300501A AD69-01584A GT_BOX_D860_EXP_AUS_Silver 1 O Q6901300601A AD69-01585A GT_BOX_D860_USA_Silver 1 O Q6901300701A AD69-01586A GT_BOX_D860_CAN_Silver 1 O 6-12 Q4301001801A AD81-00867A ALKALINE (1.
Ⅵ.
Ⅵ.
Ⅵ.
Ⅵ.
Ⅵ.
Ⅵ.
Ⅵ.
Ⅵ.
Ⅵ. SERVICE INFORMATION 1. The order of disassembly and assembly ■ Caution 1. Do the disassembling and assembling camera where the blocking static electricity mat is on the table. 2. When handling the major PCBs of camera, please wearing the band which cuts off the electric current on the wrist. 3. When handling the major parts, be careful of below caution. Parts Caution F PCB type When assembling the F PCB to the CONNECTOR by using pincette, be careful of tearing and hooking.
Ⅵ. SERVICE INFORMATION ■ Disassembling the Camera 1. Remove the 2 screws. 2. Remove the 2 screws. 3. Remove the 2 screws.
Ⅵ. SERVICE INFORMATION 4. Separate the Back Cover. 5. Separate the Front Cover.
Ⅵ. SERVICE INFORMATION 6. Separate the Belt Pin. 7. Remove the 2 screws. 8. Separate the Top Cover.
Ⅵ. SERVICE INFORMATION Caution •Discharge Point: Discharge to the main condenser as shown by the figure below. 9. Separate the LCD PCB from the connector. 10. Separate the LCD Assy.
Ⅵ. SERVICE INFORMATION 11. Remove the 2 screws. 12. Separate the LCD Assy plate. 13. 1> Disconnect the Barrel Assy. PCB from the connector and remove the three screws on the CCD Assy. 2> Remove the two screws on the main PCB Assy. 3> Remove the soldering on connector 2 of the battery armature.
Ⅵ. SERVICE INFORMATION 14. Separate the MAIN PCB Assy. 15. Remove the 2 screws.
Ⅵ. SERVICE INFORMATION 16. Separate the Flash PCB Assy. 17. Remove the screw.
Ⅵ. SERVICE INFORMATION 18. Separate the barrel Assy.
Ⅵ. SERVICE INFORMATION ■ Disassembling the Barrel 1. Unsolder the shutter PCB. 2. Remove the 3 screws. 3. Lift the Lens Base Assy. and the Zoom Position Sensor as well.
Ⅵ. SERVICE INFORMATION 4. Remove the screw from the zoom gearbox. 5. Remove the screw on the front of the zoom gearbox.
Ⅵ. SERVICE INFORMATION 6. Remove the Lens Base Assy. completely. 7. Remove the screw fixing the Shutter PCB. 8. Separate the Outer Guide Barrel with reference to the part circled in blue as shown below.
Ⅵ. SERVICE INFORMATION 9. Separate the Outer Guide Barrel with reference to the part circled in blue as shown below. 10. Separate the Outer Guide Barrel. 11. Separate the Inner Cam Barrel Assy with reference to the part circled in blue as shown below.
Ⅵ. SERVICE INFORMATION 12. Separate the Inner Cam Barrel Assy with reference to the part circled in blue as shown below. 13. Separate the Lens Cap Assy with reference to the part circled in blue as shown below. 14. Separate the Lens Cap Assy.
Ⅵ. SERVICE INFORMATION 15. Separate the Shutter Assy with reference to the part circled in blue as shown below. 16. Separate the Shutter Assy.
