Specifications

- 23 -
3-16 Replacement of Heater Convection twin
Parts Explaination Photo Explaination
Heater
Convection
Twin
1. Remove the two connectors.
2. Remove two screws securing heater
convection twin at the rear.
3. Pull the securing bracket at the left
forward, and pull it toward the left to
separate heater convection twin.
3-17 Replacement of Assy Partition S/W
Parts Explaination Photo Explaination
Partition
S/W
1. Remove a connector.
2. Remove two screws.
The Assembly is reverse order of disjointing.