User Manual (ver.5.0)
Table Of Contents
- KEY FEATURES OF YOUR BLU-RAY DISC PLAYER
- SAFETY INFORMATION
- GETTING STARTED
- DESCRIPTION
- REMOTE CONTROL
- CONNECTIONS
- Connecting to a TV with an HDMI Cable - BEST QUALITY (RECOMMENED)
- Connecting to a TV with DVI Cable - BEST QUALITY (RECOMMENED)
- Connecting to a TV (Component) - BETTER QUALITY
- Connecting to a TV (Video) - GOOD QUALITY
- Connecting to an Audio System (HDMI supported Amplifier) - BEST QUALITY (RECOMMENED)
- Connecting to an Audio System (7.1 Channel Amplifier) - BETTER QUALITY
- Connecting to an Audio System (Dolby Digital, DTS Amplifier) - BETTER QUALITY
- Connecting to an Audio System (2 Channel Amplifier) - GOOD QUALITY
- Connecting to the Network
- BASIC FUNCTIONS OF YOUR BLU-RAY DISC PLAYER
- SYSTEM SETUP
- LANGUAGE SETUP
- AUDIO SETUP
- DISPLAY SETUP
- HDMI SETUP
- PARENTAL SETUP
- NETWORK SETUP
- PC STREAMING FUNCTION
- BD DATA MANAGEMENT
- SYSTEM UPGRADE
- WATCHING A MOVIE
- LISTENING TO MUSIC
- PLAYING BACK A PICTURE
- USING THE e-CONTENTS
- APPENDIX
42_ audio setup
audio setup
Speaker
Large : Delivers full bandwidth sound with bass below 100 Hz.
Small : If LFE is on, bass below 100 Hz will be outputted through a Subwoofer instead of the
speakers. If LFE is off and the Front Speaker is set to Large, sound will be outputted through the
Front Speaker.
None : Select to disable the speakers.
Subwoofer Speaker
On : Select to use the subwoofer speaker.
Off : Select to disable the subwoofer speaker.
(This option can only be selected when the Front (L+R) speakers are set to Large.)
Press the RED(A) button
A test tone will be sent to L
;
C
;
R
;
RS
;
RSB
;
LSB
;
LS
;
LFE in order so you can make
sure the speakers are set up correctly.
To end the test tone, press the RED (A) button again.
The test tone can only be activated when no discs are in the unit.
The test tone outputs through the 7.1 channel analog outputs only.
Press the RETURN or _ button to return to the previous menu.
Press the MENU button to exit the menu.
~
~
~
~
~
~
~
~
~
M
`