User Manual (ver.5.0)
Table Of Contents
- KEY FEATURES OF YOUR BLU-RAY DISC PLAYER
- SAFETY INFORMATION
- GETTING STARTED
- DESCRIPTION
- REMOTE CONTROL
- CONNECTIONS
- Connecting to a TV with an HDMI Cable - BEST QUALITY (RECOMMENED)
- Connecting to a TV with DVI Cable - BEST QUALITY (RECOMMENED)
- Connecting to a TV (Component) - BETTER QUALITY
- Connecting to a TV (Video) - GOOD QUALITY
- Connecting to an Audio System (HDMI supported Amplifier) - BEST QUALITY (RECOMMENED)
- Connecting to an Audio System (7.1 Channel Amplifier) - BETTER QUALITY
- Connecting to an Audio System (Dolby Digital, DTS Amplifier) - BETTER QUALITY
- Connecting to an Audio System (2 Channel Amplifier) - GOOD QUALITY
- Connecting to the Network
- BASIC FUNCTIONS OF YOUR BLU-RAY DISC PLAYER
- SYSTEM SETUP
- LANGUAGE SETUP
- AUDIO SETUP
- DISPLAY SETUP
- HDMI SETUP
- PARENTAL SETUP
- NETWORK SETUP
- PC STREAMING FUNCTION
- BD DATA MANAGEMENT
- SYSTEM UPGRADE
- WATCHING A MOVIE
- LISTENING TO MUSIC
- PLAYING BACK A PICTURE
- USING THE e-CONTENTS
- APPENDIX

English _35
● BASIC FUNCTIONS
PLAYING A DISC
Press the OPEN/CLOSE button.
Place a disc gently into the tray with the disc’s label facing up.
Press the PLAY button or OPEN/CLOSE button to close the disc tray.
When you stop disc play, the player remembers where you stopped, so when you press the PLAY button
again, it will pick up where you left off. This is called the "Resume" function.
With some BD discs(BD-J), this function may not work.
Press the STOP button twice during playback to disable the Resume function.
To pause the playback, press the PAUSE button during playback.
To resume, press the PLAY button.
If the player is left in the stop mode more than 5 minutes without any user interface, a screen saver will
appear on your TV. If the player is left in the screen saver mode for more than 15 minutes, the power will
automatically turn off except during playback of a CD-DA (Automatic Power-Off Function).
If no buttons are pressed on the unit or remote control for more than 5 minutes when the unit is in Pause
mode, operation will stop (except for some Blu-ray Discs).
SETTING THE SOUND
Setting the Power On / Off Melody Sound
A Melody sound can be set so it is heard each time you turn the player on or off.
With the unit in Stop mode, press the MENU button.
Press the ENTER or
►
button.
Press the
▲%
buttons to select Setup, then press the
ENTER or
►
button.
Press the
▲%
buttons to select System, then press the
ENTER or
►
button.
Press the
▲▼
buttons to select Power On/Off sound,
then press the ENTER or
►
button.
Press the
▲%
buttons to select On or Off, then press the ENTER or
►
button.
Press the MENU button to exit the setup menu.
Setting the Touch Key Sound On / Off
You can set the player so a sound is heard each time a button is pressed on the front panel of the unit.
To setup, follow steps 1 through 4 above.
Press the
▲%
buttons to select Touch Key Sound,
then press the ENTER or
►
button.
Press the
▲%
buttons to select On or Off, then press
the ENTER or
►
button.
Press the MENU button to exit the setup menu.
1.
2.
3.
M
`
`
`
`
`
1.
2.
3.
4.
5.
6.
7.
5.
6.
7.
System
◄
Language
Audio
Display
HDMI
Network
Parental
System Information
Time Zone
Clock Set
Power On/Off sound : PCM
►
Touch Key Sound : On
BD Data Management
DivX(R) Registration
DivX(R) Deactivation
System Update
✓
On
Off
No disc
Music
Photo
Setup
System
◄
Language
Audio
Display
HDMI
Network
Parental
Time Zone
Clock Set
Power On/Off sound : On
Touch Key Sound : PCM
►
BD Data Management
DivX(R) Registration
DivX(R) Deactivation
System Update
✓
On
Off
No disc
Music
Photo
Setup










