Blu-ray Disc Player User’s Manual BD-P1400 AK68-01457A
Correct Disposal of This Product (Waste Electrical &Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature,indicates that it should not be disposed with other household wastes at the end of its working life.
key features of your new Blu-ray Disc Player Player Features Digital Photo Viewer (JPEG) You can enjoy digital photos on your TV. MP3 Playback This unit can play mp3 files from CD-R/-RW, DVD-R/-RW discs. HDMI (High Definition Multimedia Interface) HDMI reduces picture noise by allowing a pure digital video/audio signal path from the player to your TV. Blu-ray Disc Features Blu-ray Discs can store 25 GB (single layer) or 50 GB (dual layer) on a single sided disc - about 5 to 10 times the capacity of a DVD.
Graphic planes Two individual, full HD resolution (1920x1080) video layers are available, on top of the HD video layer. One layer is assigned to video-related graphics (like subtitles), and the other layer is assigned to interactive elements, such as buttons or menus. Various wipes, fades and scroll effects may be available on both layers.
safety information WARNING TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates “dangerous voltage” inside the product that presents a risk of electric shock or personal injury. This symbol indicates important instructions accompanying the product. Do not install this equipment in a confined space such as a bookcase or similar unit.
The product unit accompanying this user manual is licenced under certain intellectual property rights of certain third parties. This licence is limited to private non-commercial use by end-user consumers for licenced contents. No rights are granted for commercial use.
safety information Handling Cautions • Before connecting other components to this Blu-ray Disc Player, be sure to turn them all off. • Do not move the Blu-ray Disc Player while a disc is being played, or the disc may be scratched or broken, the Bluray Disc Player internal parts may be damaged. • Do not put a flower vase filled with water or any small metal objects on the Blu-ray Disc Player. • Be careful not to put your hand into the disc tray. • Do not place anything other than the disc in the disc tray.
contents 3 What’s included 4 5 Warning Precautions GETTING STARTED 9 10 13 Before Reading the User’s Manual Disc Type and Characteristics Disc Storage & Management DESCRIPTION 14 14 15 Front Panel Front Panel Display Rear Panel REMOTE CONTROL 16 18 18 19 Tour of the Remote Control Setting the Remote Control REGARDING THE BATTERY Controllable TV Codes CONNECTIONS 20 21 22 23 24 25 26 Connecting to a TV WITH AN HDMI Cable HDMI Auto Detection Function Connecting to a TV with DVI Cable Connecting
contents 34 35 37 38 41 43 Setting up the Language Options Setting up the Audio Options Setting up the Speaker Options Setting up the Video display/output Options Setting up the HDMI setup options Setting up the Parental Lock 45 47 47 Firmware Upgrade System Information Network Setup WATCHING A MOVIE 49 50 51 51 52 53 53 Using the Display Function Using the Disc Menu & Popup/Title Menu Repeat Play Selecting the Audio Language Selecting the Subtitle Language Changing the Camera Angle Using the Bookmark
getting started BEFORE READING THE USER’S MANUAL Make sure to check the following terms before reading the user manual. Icons that will be used in manual Term Definition h BD-ROM This involves a function available on a BD-ROM. DVD-VIDEO This involves a function available on DVD-Video or DVD-R/DVD-RW discs that have been recorded and finalized in Video Mode. DVD-RW This involves a function available on DVD-RW. (V mode and finalized only) DVD-R This involves a function available on DVD-R.
getting started DISC TYPE AND CHARACTERISTICS Disc types that can be played Disc Types Disc Logo Recorded content AUDIO + VIDEO BD-ROM DVD-VIDEO AUDIO + VIDEO AUDIO AUDIO-CD Disc Shape Single sided (25GB/50GB) Max. Playing minute Playing time depends on the Title Single sided(12 cm) 240 Double sided(12 cm) 480 Single sided(8 cm) 80 Double sided(8 cm) 160 Single sided(12 cm) 74 Single sided(8 cm) 20 DVD-RW (V mode and finalized only) AUDIO + VIDEO 12 cm (4.
Discs that cannot be played Blu-ray Discs with a region code other than "Region B". HD DVD Disc DVD-Video with a region number other than “2” or “ALL” DVD-RAM 3.9 GB DVD-R Disc for Authoring. DVD-RW(VR mode) DVD-ROM/PD/MV-Disc, etc CVD/CD-ROM/CDV/CD-G/CD-I/LD [Note] • Some commercial discs and DVD discs purchased outside your region may not be playable with this product. When these discs are played, either “No disc.” or “Please check the regional code of the disc.” will be displayed.
getting started Disc Types ❖ BD-ROM Blu-ray Disc Read Only Memory. A BD-ROM disc contains pre-recorded data. Although a BD-ROM may contain any form of data, most BD-ROM discs will contain movies in High Definition format, for playback on Blu-ray Disc Players. This unit can play back pre-recorded commercial BD-ROM discs. ❖ DVD-Video • A digital versatile disc (DVD) can contain up to 135-minutes of images, 8 audio languages and 32 subtitle languages.
❖ Using JPEG disc • CD-R/-RW, DVD-RW/-R recorded with UDF, ISO9660 or JOLIET format can be played back. • Only JPEG files with the ".jpg", ".JPG", ".jpeg" or "JPEG" extension can be displayed. • Progressive JPEG is supported. ❖ DVD-RW/-R (V) DISC STORAGE & MANAGEMENT Disc Handling • Use discs with regular shapes. If an irregular disc (a disc with a special shape) is used, this Blu-ray Disc Player may be damaged.
description FRONT PANEL DISC TRAY Opens to accept a disc. OPEN/CLOSE BUTTON Opens and closes the disc tray. Remote Control Sensor PLAY/PAUSE BUTTON Plays a disc or pauses playback. STOP BUTTON Stops disc playback. SEARCH/SKIP BUTTONS Goes to the next title/chapter/track or goes back to the previous title/chapter/track. DISPLAY Displays the playing status, time, etc. STANDBY INDICATOR When the unit is first plugged in, this indicator lights.
REAR PANEL ● DESCRIPTION Fan The fan always revolves when the power is on. Ensure a minimum of 10 cm of clear space on all sides of the fan when installing the product. 5.1CH ANALOG AUDIO OUT Connect to a 5.1CH analog input on an A/V amplifier AUDIO OUT Connects to the audio input of external equipment using audio cables. VIDEO OUT Connects the input of external equipment using a video cable. COMPONENT VIDEO OUT Connects to equipment having Component video input.
01457A_BD-P1400_XEU_1005.indd 16 Press to search a disc backwards or forwards. REVERSE/FORWARD SEARCH Buttons Press to skip backwards or forwards. REVERSE/FORWARD SKIP Buttons Each time this button is pressed, the disc will play slowly. SLOW Button CANCEL Button NUMBER Buttons STANDBY/ON Button To open and close the disc tray. OPEN/CLOSE Buttons 1. Lift the cover at the back of the remote control upward as shown. 2. Install two AAA size batteries.
01457A_BD-P1400_XEU_1005.indd 17 TV VOL Buttons Press this to switch the BD/DVD’s subtitle language. SUBTITLE Button Use this to bookmark a position while playing a disc. MARKER Button Use this to access various audio functions on a disc (BD/DVD). AUDIO Button Allow access to common functions of the Blu-ray Disc Player such as the Music or Photo List. COLOR Buttons : RED(A), GREEN (B), YELLOW(C), BLUE(D) Use this to enter the disc menu. DISC MENU Button Displays current setting or disc status.
remote control SETTING THE REMOTE CONTROL You can control certain functions of your TV with this remote control. Control function buttons include : TV STANDBY/ON, TV PROG ,., TV VOL + –, TV MUTE, TV INPUT SEL.. To determine whether your television is compatible, follow the instructions below. 1. Switch your television on. 2. Point the remote control towards the television. 3.
CONTROLLABLE TV CODES Brand SAMSUNG Code TV STANDBY/ON+01, +02, +03, +04, +05, +06, +07, +08, +09 AIWA TV STANDBY/ON+82 ANAM TV STANDBY/ON+10, +11, +12, +13, +14, +15, +16, +17, +18 TV STANDBY/ON+57 BLAUPUNKT TV STANDBY/ON+71 BRANDT TV STANDBY/ON+73 BRIONVEGA TV STANDBY/ON+57 CGE TV STANDBY/ON+52 CONTINENTAL EDISON TV STANDBY/ON+75 DAEWOO TV STANDBY/ON+19, +20, +23, +24, +25, +26, +27, +28, +29, +30, +31, +32, +33, +34 EMERSON TV STANDBY/ON+64 FERGUSON TV STANDBY/ON+73 FINLUX TV STAND
connections This section involves various methods of connecting the Blu-ray Disc Player to other external components. CONNECTING TO A TV WITH AN HDMI CABLE 1. Using an HDMI-HDMI cable (not included) connect the HDMI OUT terminal on the rear of the Blu-ray Disc Player to the HDMI IN terminal of your TV. 2. Press the input selector on your TV remote control until the HDMI signal from the Blu-ray Disc Player appears on your TV screen.
HDMI AUTO DETECTION FUNCTION The player's video output will automatically change to HDMI mode when connecting an HDMI cable while power is on (see page 40). M Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user's manual of your TV. If an HDMI or HDMI-DVI cable is connected from the player to a TV, the Blu-ray Disc Player’s output is set to If Component and HDMI are both connected, HDMI mode is automatically selected.
connections CONNECTING TO A TV WITH DVI CABLE 1. Using the HDMI-DVI cable (not included), connect the HDMI OUT terminal on the rear of the Blu-ray Disc Player to the DVI IN terminal of your TV. 2. Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the Blu-ray Disc Player to the AUDIO (red and white) IN terminals of your TV. Turn on the Blu-ray Disc Player and TV. 3.
CONNECTING TO A TV (COMPONENT) Connecting to your TV using Component video cables. 1. Using component video cables (not included), connect the COMPONENT VIDEO OUT terminals on the rear of the Blu-ray Disc Player to the COMPONENT IN terminals of your TV. 2. Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the Blu-ray Disc Player to the AUDIO (red and white) IN terminals of your TV. Turn on the Blu-ray Disc Player and TV.
connections CONNECTING TO A TV (S-VIDEO) Connecting to your TV using an S-Video cable. You will enjoy high quality images. S-Video separates the picture element into black and white(Y) and color(C) signals to present clearer images than regular video input mode. (Audio signals are delivered through the audio output.) 1. Using an S-Video cable (not included), connect the S-VIDEO OUT terminal on the rear of the Blu-ray Disc Player to the S-VIDEO IN terminal of your TV. 2.
CONNECTING TO A TV(VIDEO) 2. Turn on the Blu-ray Disc Player and TV. 3. Press the input selector on your TV remote control until the Video signal from the Blu-ray Disc Player appears on the TV screen. • If you have set the remote control to properly operate with your TV (see pages 18~19), press the TV INPUT SEL. button on the remote control and select VIDEO as the external source of the TV. Yellow M Red ● CONNECTIONS 1.
connections CONNECTING TO AN AUDIO SYSTEM (2 CHANNEL AMPLIFIER) 1. Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the Blu-ray Disc Player to the AUDIO (red and white) IN terminals of your Amplifier. 2. Using the video signal cable(s), connect the HDMI, COMPONENT, S-VIDEO, or VIDEO OUT terminals on the rear of the Blu-ray Disc Player to the HDMI, COMPONENT, S-VIDEO, or VIDEO IN terminal of your TV as described on pages 20 to 25. 3.
CONNECTING TO AN AUDIO SYSTEM (5.1 CHANNEL AMPLIFIER) 2. Using the video signal cable(s), connect the HDMI, COMPONENT, S-VIDEO, or VIDEO OUT terminals on the rear of the Blu-ray Disc Player to the HDMI, COMPONENT, S-VIDEO, or VIDEO IN terminal of your TV as described on pages 20 to 25. 3. Turn on the Blu-ray Disc Player, TV and Amplifier. 4. Press the input select button of the Amplifier to select external input in order to hear sound from the Blu-ray Disc Player.
connections CONNECTING TO AN AUDIO SYSTEM (DOLBY DIGITAL, DTS AMPLIFIER) 1. If using an optical cable (not included), connect the DIGITAL AUDIO OUT (OPTICAL) terminal on the rear of the Blu-ray Disc Player to the DIGITAL AUDIO IN (OPTICAL) terminal of your Amplifier. If using a coaxial cable (not included), connect the DIGITAL AUDIO OUT (COAXIAL) terminal on the rear of the Blu-ray Disc Player to the DIGITAL AUDIO IN (COAXIAL) terminal of the Amplifier. 2.
CONNECTING TO AN AUDIO SYSTEM (HDMI SUPPORTED AMPLIFIER) 2. Using the HDMI-HDMI cable, connect the HDMI OUT terminal of the Amplifier to the HDMI IN terminal of your TV. 3. Turn on the Blu-ray Disc Player, TV, and Amplifier. 4. Press the input select button of the Amplifier to select external input in order to hear sound from the Blu-ray Disc Player. Refer to your Amplifier's user manual to set the Amplifier's audio input. M ● CONNECTIONS 1.
connections CONNECTING TO SAMSUNG'S FTP/INTERNET SITE FOR SOFTWARE UPGRADES 1. Using the Direct LAN Cable (UTP cable), connect the LAN terminal on the rear of the Blu-ray Disc Player to the LAN terminal of your modem. - Connect to the Internet for future software upgrades. M See pages 45~48 for the Software Upgrade procedure. 30_ connections 01457A_BD-P1400_XEU_1005.
basic functions of your Blu-ray Disc Player This section introduces basic playback functions and playback by disc type. • Turn on your TV and set it to the correct Video Input (the input the Blu-ray player is connected to). • If you connected an external Audio System, turn on your Audio System and set it to the correct Audio Input. After plugging in the player, the first time you press the STANDBY/ON button, this screen comes up: If you want to select a language, press a NUMBER button.
basic functions of your Blu-ray Disc Player ON-SCREEN MENU NAVIGATION Video Language Setup Subtitle Music Disc Menu Photo Setup Audio Menu Audio Setup Digital Output PCM Down Sampling Dynamic Compression Speaker Setup Display Setup TV Aspect Movie Frame (24 Fs) Resolution Screen Message Front Display HDMI Setup Anynet+ (HDMI-CEC) Format Parental Setup System Upgrade System Information Network Setup Upgrade Start PLAYING A DISC 1. Press the OPEN/CLOSE ( ) button.
USING THE SEARCH AND SKIP FUNCTIONS During play, you can search quickly through a chapter or track, and use the skip function to jump to the next selection. Searching through a Chapter or Track During playback, press the SEARCH ( hZCV ) button. ● BASIC FUNCTIONS • If you want to search at a faster speed on the BD/DVD, press this button.
system setup For your convenience, configure proper settings for the external device to connect or any other environment before using the player. SETTING UP THE LANGUAGE OPTIONS If you set the audio, subtitle, disc menu and player menu, in advance, they will come up automatically every time you watch a movie. 1. With the unit in Stop mode, press the MENU button. 2. Press the ▲▼ buttons to select Setup, then press the OK or ► button.
SETTING UP THE AUDIO OPTIONS Allows you to set up the Audio device and sound status depending on the audio system being used with the player. 1. With the unit in Stop mode, press the MENU button. 2. Press the ▲▼ buttons to select Setup, then press the OK or ► button. No Disc Photo Language Setup Setup Audio Setup Display Setup HDMI Setup Parental Setup 3. Press the ▲▼ buttons to select Audio Setup, then press the OK or ► button.
system setup PCM Down Sampling • On : Select this when the Amplifier connected to the player is not 96KHz compatible. 96KHz signals will be down converted to 48KHz • Off : Select this when the Amplifier connected to the player is 96KHz compatible. Signals will be output without any changes.
SETTING UP THE SPEAKER OPTIONS If you have connected this player to an Amp/Receiver or Home theater via the 5.1 channel Analog outputs you need to set the Speaker Options for the best sound. 1. With the unit in Stop mode, press the MENU button. 2. Press the ▲▼ buttons to select Setup, then press the OK or ► button. No Disc Photo Language Setup Setup Audio Setup Display Setup HDMI Setup System Upgrade 3. Press the ▲▼ buttons to select Audio Setup, then press the OK or ► button.
system setup SETTING UP THE VIDEO DISPLAY/OUTPUT OPTIONS This function allows you to setup the TV screen settings. This function depends on the disc or TV type. It may not work with some discs or TVs. 1. With the unit in Stop mode, press the MENU button. Language Setup No Disc Photo Audio Setup Setup Display Setup 2. Press the ▲▼ buttons to select Setup, then press the OK or ► button. HDMI Setup Parental Setup System Upgrade 3.
Movie Frame (24 Fs) Movies are usually filmed at 24 frames per second. Some Bluray Discs have the capability of playing back at this frame rate. Setting the Movie Frame (24Fs) feature to ON allows you to adjust the Blu-ray player's HDMI output to 24 frames per second for improved picture quality.
system setup ❖ Resolution according to the output mode • BD playback Output HDMI Component VIDEO/S-Video 1080p, Movie Frame(24Fs) off 1080p@60F 1080i 576i/480i 1080p/1080i, Movie Frame (24Fs) on 1080p@24F 1080i 576i/480i 1080i, Movie Frame (24Fs) off 1080i 1080i 576i/480i 720p 720p 720p 576i/480i 576p/480p 576p/480p 576p/480p 576i/480i 576i/480i 576p/480p 576i/480i 576i/480i HDMI Component VIDEO/S-Video 1080p 1080p@60F 576p/480p 576i/480i 1080i 1080i 576p/480p 576i/480i
SETTING UP THE HDMI SETUP OPTIONS 1. With the unit in Stop mode, press the MENU button. 2. Press the ▲▼ buttons to select Setup, then press the OK or ► button. Audio Setup No Disc Photo Display Setup Setup HDMI Setup Parental Setup 3. Press the ▲▼ buttons to select HDMI Setup, then press the OK or ► button. HDMI setup menu will be displayed. System Upgrade ● SYSTEM SETUP 4. Press the ▲▼ buttons to select the desired display option (Anynet or Format), then press the OK or ► button.
system setup • Available buttons on the Samsung TV remote: These buttons work the same as this player's remote control. - Playback control buttons : - Menu operation button : - Numeric buttons : - Color buttons : A B C D ENTER TV Anynet+ Menu When pressing the Anynet+ button on your Samsung TV's remote control, the following On-Screen Display (OSD) will be shown.
SETTING UP THE PARENTAL LOCK The Parental Lock function works in conjunction with BD/DVDs that have been assigned a rating which helps you control the types of BD/DVDs that your family watches. There are up to 8 rating levels on a disc. hZ 1. With the unit in Stop mode, press the MENU button. HDMI Setup No Disc ● SYSTEM SETUP 2. Press the ▲▼ buttons to select Setup, then press the OK or ► button. Display Setup Photo Parental Setup Setup System Upgrade 3.
system setup Setting the Rating Level 1. Press the ▲▼ buttons to select Rating Level, then press the OK or ► button. Display Setup No Disc Photo HDMI Setup Parental Lock : Off Setup Parental Setup Rating Level :8 8(Adults) (Adults) System Upgrade New Password 7 6 5 4 3 2 1 (Kids) 2. Press the ▲▼ buttons to select the rating level you want, then press the OK button. For example, if you select up to Level 6, discs that contain Level 7, 8 will not play.
system upgrade Samsung may offer upgrades to your Blu-ray player's firmware in the future. To upgrade this firmware you must : 1. Go to samsung.com and refer to 'SUPPORT' page to download the firmware and burn an update CD. or 2. Connect this player's LAN terminal to the LAN terminal on your modem (see page 30) and follow the steps below. ● SYSTEM UPGRADE FIRMWARE UPGRADE 1. With the unit in No Disc mode, press the MENU button. 2. Press the ▲▼ buttons to select Setup, then press the OK or ► button.
system upgrade 6. To perform the system upgrade, press the ◄► buttons to select Start and then press the OK button. Photo No Disc Setup HDMI Setup System Information Parental Setup Network Setup System Upgrade System Upgrade Upgrade Start The new update data was found. Current Version : XXXXX New Version : XXXXX Start 7. The system update gets started.
SYSTEM INFORMATION When the firmware upgrade is done, check the firmware details by following the steps below. 1. With the unit in Stop mode, press the MENU button. HDMI Setup 2. Press the ▲▼ buttons to select Setup, then press the OK or ► button. No Disc Photo Parental Setup Setup System Upgrade 3. Press the ▲▼ buttons to select System Upgrade, then press the OK or ► button. ● SYSTEM UPGRADE 4. Press the ▲▼ buttons to select System Information, then press the OK or ► button.
system upgrade 6. Press the ▲▼ buttons to select a desired item, then press the OK button. • If DHCP is set to Off and DNS is set to Manual HDMI Setup No Disc Parental Setup Photo Network Setup System Information Setup DHCP System Upgrade : Off Network Setup IP Address Subnet Mask Gateway DNS Primary DNS Secondary DNS : : : : : : 000 . 000 . 000 . 000 Start 255 . Upgrade 255 . 255 . 000 000 . 000 . 000 . 000 Manual 000 . 000 . 000 . 000 000 . 000 . 000 .
watching a movie USING THE DISPLAY FUNCTION hZCV 2. Press the ▲▼ buttons to select the desired item. 3. Press the ◄► buttons to make the desired setup and then press the OK button. • You may use the number buttons of the remote control to directly access a title, chapter or to start the playback from a desired time. BD ● WATCHING A MOVIE 1. During playback, press the INFO button on the remote control.
watching a movie USING THE DISC MENU & POPUP/TITLE MENU hZ Using the Disc Menu 1. During playback, press the DISC MENU button on the remote control. PLAY MOVIE LANGUAGES SCENE SELECTIONS PREVIEWS 2. Press the ▲▼◄► buttons to make the desired setup, then press the ► or OK button. • The Disc menu setup items may vary from disc to disc. ▼ 3 M 4 5 6 7 8 9 10 11 12 13 14 15 Depending on the disc, the Disc Menu may not be available. Z Using the Title Menu 1.
REPEAT PLAY Repeat the current chapter or title. hZCV Repeat playback 1. During playback, press the REPEAT button on the remote control. Repeat screen appears. Repeat Off 3. To return to normal play, press the REPEAT button again, then press the ▲▼ buttons to select Off. M ● WATCHING A MOVIE 2. Press the ▲▼ buttons to select Chapter or Title. • BD/DVD repeats play by chapter or title. Depending on the disc, the Repeat function may not be available. hZCV Using the A-B Repeat function 1.
watching a movie Using the INFO button 1. During playback, press the INFO button on the remote control. 2. Press the ▲▼ buttons to select Audio language. 3. Press the ◄► buttons on the remote control to select the desired audio. M This function depends on what audio languages are encoded on the disc and may not be available. A BD disc can contain up to 32 audio languages and a DVD up to 8.
CHANGING THE CAMERA ANGLE When a BD/DVD contains multiple angles of a particular scene, you can use the ANGLE function. hZ Using the ANGLE function 1. During playback, press the INFO button on the remote control. 2. Press the ▲▼ buttons to select Angle. BD Info : 001/006 Chapter : 003/016 ● WATCHING A MOVIE Title Playing Time : 00:11:14 Audio : ENG Multi CH Subtitle : ENG Angle : 01/01 § CHANGE ¨ MOVE 3.
watching a movie Playing back a bookmark 1. During playback, press the MARKER button on the remote control. Marker BD ► T:1 00:12:17 00:12:21 / 01:53:26 T:1 00:12:27 Add a DELETE Add Add § MOVE Add s Play Add Add e EXIT 2. Press the ◄► buttons to select a bookmarked scene. 3. Press the OK or PLAY/PAUSE( ) button to start playing from the selected scene. Clearing a bookmark 1. During playback, press the MARKER button on the remote control.
listening to music B PLAYING AN AUDIO CD(CD-DA) TRACK 001 CD 01/12 ► 00:01:29 / 00:04:06 2. To move to the Music List, press the STOP or RETURN button. The Music List screen is displayed a Play Mode Video 3. Press the ▲▼ buttons to select the track you want to play, and then press the OK button.
listening to music BUTTONS ON THE REMOTE CONTROL USED FOR AUDIO CD (CD-DA)/ MP3 DISC PLAYBACK 1. SKIP ( ) button: During playback, plays the next track. Moves to the next page in the Music List or the Playlist. 2. PLAY/PAUSE ( ) button: Plays the currently selected track. If pressed during playback, the current track is paused. 3. ▲▼ buttons : Selects a track(song) or a folder in Music List or Playlist. OK 4.
Playlist You can create a playlist with up to 99 tracks. To setup, follow steps 1 to 2 in page 55. Video 1. Press the GREEN(B) button. Music CD Photo Setup TRACK 006 00:03:20 TRACK 007 00:03:32 00:04:36 TRACK 009 00:04:17 TRACK 010 00:04:11 TRACK 011 00:04:07 TRACK 012 00:04:46 TRACK 013 00:04:21 TRACK 014 00:03:43 b Playlist Original 2. Press the ▲▼ buttons to select a track, then press the OK button to add it to the Playlist. Repeat this procedure to add additional tracks.
Viewing a Picture VIEWING A PICTURE 1. Insert a JPEG disc into the disc tray. • The Menu screen is displayed. 2. Press the ▲▼ buttons to select Photo, then press the OK button. Music 176.JPG Setup BEACH.JPG 17 Feb 2004 KE.JPG 10 Apr 2003 194 KB KE2.JPG 10 Apr 2003 191 KB MBHONG.JPG 20 Apr 2002 30 KB NEW_BEE.JPT 08 Jul 2004 76 KB _____1_.JPG 18 Feb 2004 17 KB CD • The Photo List is displayed. 3. Press the ▲▼ buttons to select a picture. • To see the next page, press the SKIP ( ) button.
ZOOM To setup, follow steps 1 to 3 in "Viewing a Picture" on page 58. CD KE.JPG 04/07 4. Press the OK button. 5. Press the YELLOW(C) button. b u90 Zoom d Speed © Slide Show 6. Use the RED(A) and GREEN(B) buttons to zoom in/out the image. x2 a Zoom In b Zoom Out ● VIEWING A PICTURE ar90 m MOVE Zoom Off - To stop the Zoom Press the YELLOW(C) button. GO TO PHOTO LIST To setup, follow steps 1 to 3 in "Viewing a Picture" on page 58. CD BEACH.JPG 03/07 4. Press the OK button. 5.
troubleshooting Before requesting service, please check the following. PROBLEM SOLUTION No operations can be performed with the remote control. • Check the batteries in the remote control. They may need replacing. • Operate the remote control at a distance of no more than 6.1m. • Remove batteries and hold down one or more buttons for several minutes to drain the microprocessor inside the remote control to reset it. Reinstall batteries and try to operate the remote control again. Disc does not play.
SOLUTION If the HDMI output is set to a resolution your TV cannot support (for example, 1080p), you may not see a picture on your TV. • Press the $ button (in front panel) for more than 5 seconds with no disc inside. All settings will revert to the factory settings. Forgot password • Press the $ button (in front panel) for more than 5 seconds with no disc inside. All settings including the password will revert to the factory settings. Don't use this unless absolutely necessary.
appendix SPECIFICATIONS General Power Requirements AC 110-240V ~ 50/60Hz Power Consumption 29 W Weight 4.2 kg Dimensions 430 (W) x 79 (H) x 325 (D) mm Operating Temperature Range + 5° C to + 35° C Operating Humidity Range 10 % to 75 % BD (Blu-ray Disc) Reading Speed : 4.917m/sec DVD (Digital Versatile Disc) Disc CD : 12 cm (COMPACT DISC) CD : 8 cm (COMPACT DISC) Composite Video Reading Speed : 3.49 ~ 4.06 m/sec. Approx. Play Time (Single Sided, Single Layer Disc) : 135 min.
Compliance and Compatibility Notice • Because AACS (Advanced Access Content System) is approved as content protection system for BD format, similar to use of CSS (Content Scramble System) for DVD format, certain restrictions are imposed on playback, analog signal output, etc., of AACS protected contents. The operation of this product and restrictions on this product may vary depending on your time of purchase as those restrictions may be adopted and/or changed by AACS after the production of this product.
UNITED KINGDOM This Samsung product is warranted for the period of twelve (12)months from the original date of purchase,against defective materials and workmanship.In the event that warranty service is required,you should return the product to the retailer from whom it was purchased. However,Samsung Authorised Dealers and Authorised Service Centres in other EC Countries will comply with the warranty on the terms issued to purchasers in the country concerned.
Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Region North America Latin America Country CANADA MEXICO U.S.A ARGENTINE BRAZIL CHILE COSTA RICA ECUADOR EL SALVADOR GUATEMALA JAMAICA PANAMA PUERTO RICO REP. DOMINICA 1-800-SAMSUNG(726-7864) www.samsung.com/latin VENEZUELA COLOMBIA BELGIUM 0-800-100-5303 01-8000112112 0032 (0)2 201 24 18 844 000 844 Distributor pro Českou republiku : Samsung Zrt.
Blu-ray Disc Player User’s Manual BD-P1400 AK68-01457A
