BD-D7000 Blu-ray™ Disc Player user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.
Key features Blu-ray Disc Features Blu-ray Discs support the highest quality HD video available in the industry - Large capacity means no compromise on video quality. The following Blu-ray Disc features are disc dependant and will vary. Appearance and navigation of features will also vary from disc to disc. Not all discs will have the features described below. Video highlights The BD-ROM format supports three highly advanced video codecs: AVC, VC-1 and MPEG-2.
Safety Information 02 Warning CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lighting flash and Arrowhead within the CAUTION: TO REDUCE THE RISK OF ELECTRIC The explanation point within the triangle triangle is a warning sign alerting you of SHOCK, DO NOT REMOVE COVER (OR BACK) is a warning sign alerting you of important dangerous voltage inside the product. NO USER SERVICEABLE PARTS INSIDE. REFER instructions accompanying the product. SERVICING TO QUALIFIED SERVICE PERSONNEL.
Safety Information Precautions Important Safety Instructions Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings.
Disc Shape • Use discs with regular shapes. If you use an irregular disc (a disc with a special shape), you can damage the player. Holding discs • Avoid touching the surface of a disc where data has been recorded. Blu-ray Discs • Do not leave a Blu-ray Disc in the player for long periods of time. Remove the Blu-ray Disc from the player and store it in its case. • Be careful not to scratch or leave fingerprints on the surface of the Blu-ray Disc.
Safety Information • Do not expose the player to dripping or splashing. Do not place objects filled with liquids, such as vases, on the player. • To turn off the player completely so that it draws no power, you must remove its power plug from the wall socket. Consequently, you should keep the player’s power plug easily accessible at all times. • Do not touch the power plug with a wet hand. Otherwise, it can cause an electric shock. • Do not share one power socket with multiple electric devices.
Contents 2 2 Blu-ray Disc Features Blu-ray Disc Player Features Safety Information 3 4 4 4 5 5 Warning Precautions Important Safety Instructions Viewing using 3D function Disc Storage & Management Disc Handling Getting Started 11 11 11 12 12 13 13 14 16 16 17 18 19 19 20 Before using the User Manual Disc Types and Contents your player can play Disc types your player cannot play Blu-ray Disc Compatibility Disc Types Region Code Copyright Supported File Formats Logos of Discs the player can play Access
Contents Connections 25 25 26 Connecting to an Audio System Case 1 : Connecting to an Audio System (HDMI supported AV receiver) - Best Quality (Recommended) Case 2 : Connecting to an Audio System (AV receiver with Dolby Digital or DTS decoder) - Better Quality Case 3 : Connecting to an Audio System (Stereo Amplifier) - Good Quality Connecting to the Network Cable Network Wireless Network 27 28 29 29 30 30 30 30 32 32 33 33 33 33 33 35 35 35 35 36 36 36 39 40 Initial Settings Accessing the Settings Menu
40 40 40 40 41 41 41 41 41 41 41 41 42 42 42 42 42 44 System Initial Settings Anynet+(HDMI-CEC) BD Data Management Time Zone DivX® Video On Demand Reset Language Security BD Parental Rating DVD Parental Rating Change Password General Front Display Network Remote Control Support Software Upgrade Contact Samsung Basic Functions 45 45 45 46 46 46 46 46 46 47 47 47 47 47 47 Playing a Video Playback 3D Converter Disc Structure Using the Disc Menu/Title Menu/Popup Menu Using the Disc Menu Using the Title Menu
Contents 10 Basic Functions 47 48 48 48 48 49 49 49 50 50 50 50 51 51 52 52 52 53 Using the TOOLS button Moving to a Desired Scene Directly Repeating the Title or Chapter Repeating a Section Changing to Full Screen Selecting the Picture Settings Selecting the Audio Language Selecting the Subtitle Language Changing the Camera Angle Setting BONUSVIEW Listening to Music Playing an Audio CD (CD-DA)/MP3 Repeat an Audio CD (CD-DA)/MP3 Playlist Playing back Pictures Playing JPEG files Using the TOOLS button Pl
Getting Started 03 Before using the User Manual Term Logo Icon Definition h z Indicates a function available on a BD-ROM or BD-RE/-R disc recorded in the BD-RE format. Z � Indicates a function available on a DVD-VIDEO or recorded DVD+RW/ DVD-RW(V)/ DVD-R/+R discs that have been recorded and finalized. � Indicates a function available in a CD-RW/-R, DVD-RW/-R, BD-RE/-R disc or a USB storage media containing DivX, MKV, MP4 contents.
Getting Started ✎ NOTE ▪ Some commercial discs and DVDs purchased ▪ ▪ ▪ ▪ ▪ ▪ ▪ outside your region may not play on this player. Playback may not work for some types of discs, or when you use specific operations, such as angle change and aspect ratio adjustment. Information about the discs is written in detail on the disc box. Please refer to this if necessary. Do not allow the disc to become dirty or scratched.
AVCHD (Advanced Video Codec High Definition) • This player can play back AVCHD format discs. These discs are normally recorded and used in camcorders. • The AVCHD format is a high definition digital video camera format. • The MPEG-4 AVC/H.264 format compresses images with greater efficiency than the conventional image compressing format. • Some AVCHD discs use the “x.v.Color” format. This player can play back AVCHD discs that use “x.v.Color” format. • “x.v.Color” is a trademark of Sony Corporation.
Getting Started Supported File Formats Notes on the USB connection • • • • • • • • • • • • Your player supports USB storage media, MP3 players, digital cameras, and USB card readers. The player does not support folder or file names longer than 128 characters. Some USB/digital camera devices may not be compatible with the player. Your player supports the FAT16, FAT32, and NTFS files systems. Connect USB devices directly to the player’s USB port.
*.vro VRO VOB *.mpg *.mpeg *.ts *.tp *.trp H.264 BP/MP/HP 1920x1080 6 ~ 30 25 MPEG4 SP/ASP 1920x1080 6 ~ 30 8 MPEG2 1920x1080 24/25/30 30 MPEG1 352 X 288 24/25/30 30 MPEG2 1920x1080 24/25/30 30 MPEG2 1920x1080 24/25/30 H.264 1920x1080 6 ~ 30 25 VC1 1920x1080 6 ~ 30 25 MPEG1 PS 352 X 288 H.
Getting Started Logos of Discs the player can play Blu-ray Disc 3D Blu-ray Disc DTS-HD Master Audio DivX BD-LIVE Dolby TrueHD NTSC broadcast system in U.S.A, Canada, Korea, Japan Java Accessories Check for the supplied accessories below.
03 Front Panel Getting Started a h g f ed cb 1 DISC SLOT Inserts a disc. 3 EJECT BUTTON Ejects a disc. ENTER BUTTON Selects menu items or starts a disc. PLAY/PAUSE BUTTON Plays a disc or pauses playback. STOP BUTTON Stops disc playback. DISPLAY Displays the playing status. POWER BUTTON Turns the player on and off. REMOTE CONTROL SENSOR Detects signals from the remote control.
Getting Started Rear Panel a b c d DC 12V AV OUT HDMI OUT e f DIGITAL AUDIO OUT OPTICAL LAN 5V 500mA 1 2 3 4 5 6 DC 12V Connects to power supply. USB HOST You can connect a USB memory flash stick here and use it as storage when the player is connected to BD-LIVE. You can also use the USB Host for software upgrades and MP3/JPEG/DivX/MKV/MP4 playback. A/V OUT Connects the input of external equipment using a audio/video cable.
03 Remote Control Turn the player on and off. Press to eject a disc. Press to use the 3D function. Press numeric buttons to operate options. Press to switch the Blu-ray Disc/DVD’s subtitle language. TV POWER POWER 2D�3D SOURCE 1 2 3 4 5 6 7 8 SUBTITLE 0 Turn the TV on and off. (To operate your TV, please refer to page 20) After setup, allows you to set the input source on your TV. 9 Use to access various audio functions on a disc (Blu-ray Disc/DVD).
Getting Started Setting the Remote Control to Operate Your TV You can control certain functions of your TV with this remote control. Button TV POWER TV SOURCE TV VOL (+/–) Function Used to switch the television on and off. Used to select an external source connected to the TV. Used to adjust the volume of the television. TV CH (,/.) Used to select the desired channel. TV MUTE Used to toggle the sound on and off. ✎ NOTE ▪ The functions listed above will not necessarily work on all televisions.
Connections 04 Connecting to a TV 1. Using an HDMI cable, connect the HDMI OUT terminal on the player to the HDMI IN terminal of your TV. 2. Turn on the player and TV. 3. Press the input selector on your TV remote control until the HDMI signal from the player appears on your TV screen. • If you have set the remote control to operate your TV (See page 20), press the TV SOURCE button on the remote control and select HDMI as the external source of the TV.
Connections Case 2 : Connecting to a TV with an Audio/Video cable - Good Quality 1. Using an Audio/Video cable, connect the A/V OUT (yellow) terminal on the player to the VIDEO IN (yellow) / AUDIO IN (red and white) terminals of your TV. 2. Turn on the player and TV. 3. Press the input selector on your TV remote control until the “VIDEO” signal from the player appears on the TV screen.
04 Connecting to an Audio System Case 1 : Connecting to an Audio System (HDMI supported AV receiver) - Best Quality (Recommended) 1. Using an HDMI cable, connect the HDMI OUT terminal on the player to the HDMI IN terminal of your AV receiver. 2. Using an HDMI cable, connect the HDMI OUT terminal of the AV receiver to the HDMI IN terminal of your TV. 3. Turn on the player, TV, and AV receiver. 4. Press the input select button of the AV receiver to select the external input and hear sound from the player.
Connections Case 2 : Connecting to an Audio System (AV receiver with Dolby Digital or DTS decoder) - Better Quality 1. Using an optical cable, connect the DIGITAL AUDIO OUT (OPTICAL) terminal on the player to the DIGITAL AUDIO IN (OPTICAL) terminal of your AV receiver. 3. Turn on the player, TV, and AV receiver. 4. Press the input select button of the AV receiver to select the external input and hear sound from the player. Refer to your AV receiver’s user manual to set the AV receiver’s audio input. 5.
04 Connecting to the Network Cable Network 1. Using a Direct LAN Cable (UTP cable), connect the LAN terminal of the player to the LAN terminal of your modem or router. 2. To set the network options, see pages 36~40.
Connections Wireless Network Your player has built in Wi-Fi capability. You can connect to a network through a Wireless IP sharer (a router or modem). To set the network options, see pages 36~40. Broadband service etworking with PC for N AllShare function Wireless IP sharer ✎ NOTE ▪ To use a wireless network, your player must be connected to a wireless IP sharer (router).
Setup My Contents Setup 1. Turn on your TV after connecting the player. When you connect the player to a TV for the first time, player turns on automatically and the Initial Settings screen appears. • Home Menu 05 Initial Settings Videos Photos Music My Devices Internet Settings Initial Settings | On-Screen Language Select a language for the on-screen displays.
Setup 1 2 3 4 5 6 7 8 SUBTITLE 0 9 AUDIO Accessing the Settings Menu DISC MENU 1 MENU 2. Press the ◄► buttons to select Settings, and then press the ENTER button. 3. Press the ▲▼ buttons to select the desired submenu, and then press the ENTER button. TITLE MENU POPUP TOOLS INFO RETURN EXIT 4. Press the ▲▼ buttons to select the desired item, and then press the ENTER button. 3 2 1 INTERNET@ SMART 5. Press the EXIT button to exit the menu.
3D Settings Select whether to play a Blu-ray Disc with 3D contents in 3D Mode. Settings Display Audio Network System Language Security General Support 3D Settings Screen Size ! CAUTION ▪ ▪ 3D Settings 3D Blu-ray Playback Mode Lets you enter the actual screen size of your TV so that the player can adjust the image according to the screen size and display an optimal 3D image. (For 3D displays bigger than 116 inches, setting screen size to 116 is a safe choice.
Setup TV Aspect (Picture Size and Format) Depending on the type of television you have, you may want to adjust the screen size setting. • 16:9 Original : Select when you connect the player to a 16:9 TV screen. The player will display all content in its original aspect ratio. Content formatted in 4:3 will be displayed with black bars on the left and right. • 16:9 Full : Select when you connect the player to a 16:9 TV screen. All content will fill the full screen. Content formatted in 4:3 will be stretched.
05 Resolution according to the output mode HDMI / connected HDMI Mode Output Setup Blu-ray Disc Resolution of Blu-ray Disc BD Wise 1080p@60F Movie Frame : Auto (24Fs) 1080i 720p VIDEO Mode VIDEO Mode 1080p@60F 480i - 480i - 1080p@60F 1080p@60F 480i - 1080i 1080i 480i 480i 480i 480i 1080p@24F 1080p@24F 720p 480p - • DVD playback HDMI Mode 480i HDMI / connected Auto Max.
Setup ✎ NOTE ▪ If the TV you connected to the player does not ▪ ▪ ▪ 32 support Movie Frame or the resolution you selected, the message “If no pictures are shown after selecting ‘Yes’, please wait for 15 seconds to return to the previous resolution. Do you want to change the resolution?” appears. If you select Yes, the TV’s screen will go blank for 15 seconds, and then the resolution will revert to the previous resolution automatically.
Still Mode Lets you set the type of picture the player displays when you pause DVD playback. • Auto : Automatically shows the best still picture depending on the content. • Frame : Select when pausing a scene with a little action. • Field : Select when pausing a scene with a lot of action. Digital Output You set the Digital Output to match the capabilities of the AV receiver you’ve connected to the player : • PCM : Choose if you have connected an HDMI supported AV receiver.
Setup Digital Output Selection Setup Connection PCM Dolby Digital Dolby Digital Plus Audio Stream Dolby TrueHD on Blu-ray Disc DTS DTS-HD High Resolution Audio DTS-HD Master Audio PCM Audio Stream Dolby Digital on DVD DTS Definition for Blu-ray Disc Bitstream (Unprocessed) PCM Any HDMI supported AV receiver Up to PCM 7.1ch Up to PCM 7.1ch Up to PCM 7.1ch Up to PCM 7.1ch Up to PCM 6.1ch Up to PCM 7.1ch Up to PCM 7.1ch PCM 2ch Up to PCM 5.1ch Up to PCM 6.
▪ ▪ ▪ ▪ If the HDMI device (AV receiver, TV) is not compatible with compressed formats (Dolby digital, DTS), the audio signal outputs as PCM. Regular DVDs do not have BONUSVIEW audio and Navigation Sound Effects. Some Blu-ray Discs do not have BONUSVIEW audio and Navigation Sound Effects. This Digital Output setup does not effect the analog (L/R) audio or HDMI audio output to your TV. It effects the optical and HDMI audio output when your player is connected to an AV receiver.
Setup Audio Sync In some cases when the player is connected to a digital TV, the audio signal may not synchronize with the video signal. If this occurs, adjust the audio delay time to match the video signal. • You can set the audio delay time between 0 msec and 200 msec. Adjust it to the optimal setting. ✎ NOTE ▪ The audio delay time you specify may not be exact depending on the played content. Network Before you begin, contact your ISP to find out if your IP address is static or dynamic.
✎ NOTE ▪ Depending on your Windows version, the information may differ. To enter the Network settings into your player, follow these steps: 1. Press the ▲▼ buttons to select Wired, and then press the ENTER button. 2. Press the ◄► buttons to select IP Settings, and then press the ENTER button. 3. On the Network Status screen, select Cancel, and then press Enter. Settings Display Audio Network System Language Security General Support IP Mode IP Settings Gateway DNS Mode DNS Server Manual 0 . 0 .
Setup 3. Press the ▲▼ buttons to select the desired network, and then press the ENTER button. The Security screen appears. 4. On the Security screen, enter your network’s Pass Phrase. Enter numbers directly using your remote control. To select a letter, press the ▲▼◄► buttons to move the cursor, then press the ENTER button. Settings Display Audio Network System Language Security General Support Enter security key.
10. Enter the IP Address, Subnet Mask, and Gateway values. 11. Press the ▼ to go to DNS Mode. 12. Press the ▼ button to go to the first DNS entry field. Enter the numbers as above. 13. Press the OK button. 14. The Network Status screen appears. The player connects to the network after the network connection is verified. WPS(PBC) The easiest way to set up the wireless network connection is using the WPS(PBC) function or the One Foot Connection function.
Setup BD-LIVE Internet Connection Set to allow or prohibit an Internet connection when you use the BD-LIVE service. • Allow (All) : The Internet connection is allowed for all BD-LIVE contents. • Allow (Valid Only) : The Internet connection is allowed only for BD-LIVE contents containing a valid certificate. • Prohibit : No Internet connection is allowed for any BD-LIVE content.
The total memory available to BD Data Management may differ, depending on the conditions. Time Zone You can specify the time zone that is applicable to your area. Settings Display Audio Time Zone Network System Language Security General Support GMT + 00:00 London, Lisbon, Casablanca < Change " Save ' Return Security This function works in conjunction with Blu-ray Disc/DVDs that have been assigned an age rating or numeric rating that indicates the maturity level of the content.
Setup General Front Display Change the brightness of the front panel. • Auto : Dim during playback. • Dim : Dim the display window. • Bright : Brighten the display window. Network Remote Control The Network Remote Control function lets you control your Blu-ray Disc player from a remote device such as a smart phone through a wireless connection to your local area network. To use the Network Remote Control function, follow these steps: 1. Select On in the Network Remote Control menu. 2.
If you want to cancel the upgrade while the upgrade software is downloading, press the ENTER button. By USB To upgrade by USB, follow these steps: 1. Visit www.samsung.com/bluraysupport. 2. Download the latest USB software upgrade zip archive to your computer. 3. Unzip the zip archive to your computer. You should have a single folder with the same name as the zip file. 4. Copy the folder to a USB flash drive. 5.
Setup To set Download in Standby Mode, follow these steps: 1. Press the ▲▼ buttons to select Download in Standby Mode, and then press the ENTER button. 2. Select On or Off. • Off : If you select Off, the player will notify you with a pop up message when new upgrade software is available. • On : If you select On, the player will automatically download new upgrade software when it is in Standby mode with the power off.
Basic Functions 1. Press the OPEN/CLOSE ( open the disc slot. ) button to 2. Push a disc into the Blu-ray Disc player with the disc’s label facing up. ✎ NOTE ▪ You can’t convert 2D contents into 3D or use the 2D3D button In the following cases: - When the player is not connected with an HDMI cable - When the connected TV does not support 3D ▪ - When you are playing 3D contents (disc, file). 2D content is converted into the following 3D formats: - 1080p 24fps : Output to 1080p 24 fps 3D.
Basic Functions Disc Structure Using the Title Menu • Blu-ray Disc, DVD-VIDEO 1. During playback, press the TITLE MENU button on the remote control. The content of discs are usually divided as shown below. title 1 chapter 1 chapter 2 chapter 1 title 2 chapter 2 chapter 3 track 2 and this menu may not be available. track 3 track 4 track 5 • MP3, WMA, DivX, MKV and MP4 folder (group) 1 file 1 file 2 2. Press the ▲▼◄► buttons to make the desired selection, then press the ENTER button.
Searching for a Desired Scene hzZyx • During playback, press the SEARCH ( ) button. Each time you press the SEARCH ( ) button, the playback speed will change as follows: BD-ROM, BD-RE/-R, DVD-RW/-R, DVD+RW/+R, DVD-VIDEO )1)2)3 )4)5)6)7 (1(2(3 (4(5(6(7 DivX, MKV, MP4 )1)2)3 (1(2(3 • To return to normal speed playback, press the PLAY ( ) button. ✎ NOTE ▪ The player does not play sound in search mode. Skipping Chapters hzZyx • During playback, press the SKIP ( ) button.
Basic Functions ✎ NOTE ▪ Depending on the disc, the Tools menu may differ. Moving to a Desired Scene Directly hzZy Repeating a Section hzZy 1. During playback, press the TOOLS button. 1. During playback, press the TOOLS button. 2. Press the ▲▼ buttons to select Repeat Mode. 3. Press the ◄► or number button to select desired Title, Chapter or Time, then press the ENTER button. 4. Press the ENTER button at the point where you want repeat play to start (A). 2.
This function enables you to adjust video quality when the player is connected to a TV. ▪ hzZy 1. During playback, press the TOOLS button. 2. Press the ▲▼ buttons to select Picture Settings, and then press the ENTER button. 3. Press the ◄► buttons to select the desired Picture Settings, and then press the ENTER button. • Dynamic : Choose this setting to increase Sharpness. • Normal : Choose this setting for most viewing applications. • Movie : This is the best setting for watching movies.
Basic Functions Changing the Camera Angle Listening to Music hZ ow When a Blu-ray Disc/DVD contains multiple angles of a particular scene, you can use the ANGLE function. Playing an Audio CD (CD-DA)/MP3 1. During playback, press the TOOLS button. 2. Press the ▲▼ buttons to select Angle. 3. Press the ◄► buttons to select the desired Angle. Setting BONUSVIEW h The BONUSVIEW feature allows you to view additional content (such as commentaries) in a small screen window while the movie is playing.
2. Press the ▲▼ buttons to select Repeat Mode, and then press the ◄► buttons to select the desired repeat mode. Audio CD | Music 3. Press the ▲▼ buttons to select Shuffle Mode, and then press the ◄► buttons to select On or Off. ) One Song ( The random option plays songs in ) Shuffle Mode random order. To operate this function, please set the shuffle mode to On. ( ) All The current song is repeated. All songs are repeated. Playlist 1. Insert an Audio CD (CD-DA) or an MP3 Disc.
Basic Functions Playing back Pictures G Playing JPEG files 1. Insert a JPEG disc. 2. Press the ▲▼ buttons to select Photos, and then press the ENTER button. • Zoom : Select to enlarge the current picture. (Enlarged up to 4 times) • Rotate : Select to rotate the picture. (This will rotate the picture either clockwise or counter clockwise.) • Picture Settings : Select this if you want to adjust the picture quality. • Information : Shows the picture information including the name and size, etc. 3.
1. Move to the Home menu. ▪ My Contents Videos Photos Music My Devices Internet (by performing the “Safely Remove USB” function) in order to prevent a possible damage to the USB memory. Press the MENU button to move to the Home menu, select the YELLOW (C) button, and then press the ENTER button. If you insert a disc when playing a USB storage device, the device mode changes to “DVD or CD” automatically. Settings d WPS(PBC) 2.
Network Services You can enjoy various network services such as Smart Hub or BD-LIVE by connecting the player to your network. Read the following instructions before using any network service. 1. Connect the player to the network. (See pages 25~26) 2. Configure the network settings. (See pages 36~40) Using Smart Hub, you can stream movies, videos, and music from the Internet, access various for pay or free-of-charge applications and view them on your TV.
3 2 4 5 6 Search Your Video Samsung Apps Contents 1 Contents 2 Contents 3 Contents 4 Recommended Contents 1 xxxxxxxx Contents 2 xxxxxxxx Contents 1 Contents 2 Contents 3 Contents 4 Contents 5 xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx Contents 4 Contents 5 Contents 6 xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx Contents 7 Contents 8 Contents 9 Contents 10 Contents 11 Contents 12 xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx a Login b Sort by c Edit Mode d Setting
Network Services Using the Keypad Through your remote, you can use the On-Screen Keypad to enter letters, numbers, and symbols. 1 2 def ghi jkl mno pqrs tuv wxyz 4 1 5 7 2 T9 3 9 0 ab To establish your own, exclusive, configuration of Smart Hub, create your own Smart TV Account. To create an account, follow these steps: 6 8 Shift Creating an Account 3 abc .,– Delete Ab AB 1 To move within the text, use the Arrow buttons.
10. Repeat Steps 7 and 8. 5. Using the keypad and your remote, enter your password. When done, press the ENTER button, select OK, and then press the ENTER button again. 9. Select Confirm password, and then press the ENTER button. 11. When the Create Account screen re-appears, select Create Account, and then press the ENTER button. The Confirmation window appears. 12. Select OK, and then press the ENTER button. The Continue to Register Service window appears. 13.
Network Services Register Service Account If you have existing accounts with any of the providers listed by the Register Service Account function, you can associate the provider account and the provider account password with your Smart TV Account. If you associate the account, you will be able to log onto the account through Smart Hub easily, without entering your account name or password. To use the Register Service Account function, follow these steps: 1.
✎ NOTE ▪ If you forgot your password, press the STOP ( ) button on the front panel of the player for more than 5 seconds with no disc inserted. Properties The Properties menu item lists three functions that display information about Smart Hub : Detail Lists information about Smart Hub including version number, the number of services installed, memory usage, and the unique product ID. Terms of Service Agreement Displays the Terms of Service Agreement.
Network Services To Access Widgets in a Folder 1. Close the Edit Mode menu. 2. In My Applications, press the ▲▼◄► to select a folder, and then press the ENTER button. The folder opens. 3. Select a widget, and then press the ENTER button. The widget’s application or service starts. To Edit Items in a Folder Select a folder, and then press the ENTER button. The folder opens. Press the YELLOW (C) button on your remote. The Edit buttons appear at the bottom of the screen.
2. Press the ▲▼◄► to select a locked widget, and then press the ENTER button. 3. Press the ▲▼◄► to select Unlock, and then press the ENTER button. The Lock Service window appears. 4. Enter the Parental Security Code (See page 41). If you have not created a Parental Security Code, enter 0000. 5. Press the ENTER button. The Lock Service Released window appears confirming the lock has been release, and then closes.
Network Services Using the Samsung Apps Screen To use the Samsung Apps screen, follow these steps: 1. Press the ◄► buttons to move to the category list on the left. 2. Press the ▲▼ to highlight a category. In a few seconds, the Samsung Apps screen displays the applications in that category. The Sort tabs appear across the top. 3. Press the ► button to move to the displayed applications or services. 4. Press the ▲▼◄► buttons to select an application or service, and then press the ENTER button.
✎ NOTE ▪ The Internet contents services may be added or deleted by providers without notice. AllShare lets you play music, video, and photo files located in your PC or your DLNA compatible mobile phone or NAS on the player. To use AllShare with your player, you must connect the player to your network (See pages 25~26). To use AllShare with your PC, you must install AllShare software on your PC. If you have a DLNA compatible mobile phone or NAS, you can use AllShare without any additional software.
Appendix Troubleshooting Before requesting service, please check the following. PROBLEM SOLUTION No operation can be performed with the remote control. • Check the batteries in the remote control. They may need replacing. • Operate the remote control at a distance of no more than 20 feet. • Remove batteries and hold down one or more buttons for several minutes to drain the microprocessor inside the remote control to reset it. Reinstall batteries and try to operate the remote control again.
SOLUTION 08 • Press the STOP ( ) button (on front panel) for more than 5 seconds with no disc inside. All settings including the password will revert to the factory settings. Don’t use this unless absolutely necessary. • When the factory default settings are restored, all stored user BD data is deleted. If you experience other problems. • Go to the contents and find the section of the user manual that contains the explanations regarding the current problem, and follow the procedure once again.
Appendix PROBLEM BD-LIVE SOLUTION I cannot connect to the BD-LIVE server. • Check whether the network connection is successful or not by using the Network Status menu. (See page 39) • Check whether the USB memory device is connected to the player. • The memory device must have at least 1GB of free space to accommodate the BD-LIVE service. You can check the available size in BD Data Management. (See page 40) • Check whether the BD-LIVE Internet Connection menu is set to Allow(All).
B Background Music BD Data Management BD-LIVE BD Wise BONUSVIEW C Camera Angle Contact Samsung 16 63 40 49 52 40~41 40, 63 30 50 50 44 D Digital Output 33~35 Disc Menu 46 Disc Structure 46 Disc Types 11~13 Downmixing Mode 35 Dynamic Range Control 35 H HDMI Deep Color I Initial Settings J JPEG 33 40 52 Keypad M Movie Frame (24Fs) MP3 N Network Settings P PCM Downsampling Popup Menu Progressive Mode 56 32 50~51 36~40 U USB Storage Device W Wired Network Wireless Network 53 36~
Appendix General Specifications Power Requirements Power Consumption Weight Dimensions Operating Temperature Range Operating Humidity Range BD (Blu-ray Disc) DVD (Digital Versatile Disc) Disc CD : 5 inches (COMPACT DISC) CD : 3 1/2 inches (COMPACT DISC) Video Output Composite Video Video/Audio HDMI Audio Output Network 2 Channel Digital Audio Output Ethernet Wireless LAN Security WPS(PBC) DC12V, 2.0A 17W 2.4 Ibs 7.1 (W) X 7.1 (D) X 1.2 (H) inches +41°F to +95°F 10 % to 75 % Reading Speed : 9.
08 Compliance and Compatibility Notice Copy Protection • Because AACS (Advanced Access Content System) is approved as content protection system for Blu-ray Disc format, similar to use of CSS (Content Scramble System) for DVD format, certain restrictions are imposed on playback, analog signal output, etc., of AACS protected contents.
Appendix • Many Blu-ray Disc/DVDs are encoded with copy protection. Because of this, you should only connect your Player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copy-protected Blu-ray Disc/DVDs. • This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited. • Under the U.S.
08 License Appendix • Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. • Manufactured under license under U.S. Patent #’s : 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,212,872; 7,333,929; 7,392,195; 7,272,567 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are registered trademarks, & DTS-HD, DTS-HD Master Audio, and the DTS logos are trademarks of DTS, Inc. Product includes software.
LIMITED WARRANTY TO ORIGINAL PURCHASER This SAMSUNG brand product, as supplied and distributed by SAMSUNG and delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited warranty period of: One (1) Year Parts and Labor* (*90 Days Parts and Labor for Commercial Use) This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United States.
Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Area ` North America Contact Center Web Site Canada Mexico U.S.A 1-800-SAMSUNG (726-7864) 01-800-SAMSUNG (726-7864) 1-800-SAMSUNG (726-7864) www.samsung.com www.samsung.com www.samsung.
QUESTIONS OR COMMENTS? COUNTRY CALL OR VISIT US ONLINE AT IN THE US 1-800-SAMSUNG (726-7864) www.samsung.com WRITE Samsung Electronics America, Inc.
