User Manual

English 21
03 Getting Started
Setting the Remote Control
To determine whether your television is
compatible, follow the instructions below.
Switch your television on.
Point the remote control towards the television.
Select the TV mode (Green colour) by
pressing the BD-HDD/TV button repeatedly.
Press and hold the TV POWER button and
enter the two-figure code corresponding to
the brand of your television by pressing the
appropriate number buttons.
If your television is compatible with the remote
control, it will switch off.
It is now programmed to operate with the
remote control.
NOTE
If several codes are listed for your television brand,
try each one in turn until you find one that works.
If you replace the remote control’s batteries, you
must set the brand code again.
You can control certain functions of your TV with
this remote control.
Button Function
TV POWER Used to switch the television on and off.
Number Used to input number directly.
TV VOL +/–
Used to adjust the volume of the
television.
TV MUTE Used to toggle the sound on and off.
PROG (
,
/
.
) Used to select the desired channel.
TV SOURCE
Used to select an external source
connected to the TV.
1.
2.
3.
4.
✎
▪
▪
In case of Samsung TV, below buttons are also
compatible with this remote control.
Button Function
MENU Used to move to the TV menu.
TOOLS Used to display Tools menu.
▲▼◄►
Used to move the cursor or select an
item.
ENTER Used to select menu items.
INFO Used to display INFO menu.
RETURN Return to the previous menu.
EXIT Used to exit the menu.
COLOUR (A,B,C,D)
These buttons are used for several
functions.
NOTE
The functions listed above will not necessarily work
on all televisions. If you encounter problems, operate
the television directly.
Installing batteries
NOTE
If the remote does not operate properly :
Check the polarity +/– of the batteries.
Check if the batteries are drained.
Check if remote sensor is blocked by obstacles.
Check if there is any fluorescent lighting nearby.
CAUTION
The rechargeable battery incorportabed in this
product is not user replaceable. For the information
on its replacement, go to your service provider.
✎
▪
✎
▪
•
•
•
•
!
▪