دليل المستخدم

Setting the Sleep timer
The Sleep Timer can be used when you are cooling or heating your
room
to switch the air conditioner off automatically after a period of
8 hours.
➢
If you wish to switch the unit off at a specific time, refer to page 13.
1 Make sure that you have selected either COOL or HEAT mode.
2 Press the button on the remote control
or
Press the button on the unit until the SLEEP indicator lights up.
Result
: ◆ Each time you press a button, the unit beeps.
◆ The “SLEEP” passes through the control panel for about
15
seconds and the " " will be displayed.
◆ The remaining time is displayed and decreased by 1 hour
automatically
to indicate the remaining time.
◆ The air conditioner will be controlled as illustrations below.
To cancel the timer, press:
◆ on the remote control.
or
◆ on the unit.
Result
: ◆ The unit beeps.
◆ The SLEEP indicator is no longer displayed.
◆ The air conditioner operates in the mode selected last.
To Cancel the Sleep Timer
E-14
Cooling When the temperature has
been
increased by 1°C (after
1 hour), it is maintained for 7
hours.
Heatin
g The temperature is decreased
by
1°C after 1 hour.
When
it has been decreased
by
2°C (after 2 hour), the
temperature
is maintained for
6 hours.
Set
TEMP.
Start
time
Stop
time
1hr 8hr
Remote Control
Control
Panel