دليل المستخدم

Airing Your Room
E-10
If the atmosphere in your room is stale, you can air it using the Fan
feature
and if necessary, evacuate the stale air outside.
1 If you wish to evacuate stale air outside, push the ventilation lever on the front
of
the unit to the right and the open position ( ).
Result
:
The air inside the room circulates and stale air is evacuated outside.
Otherwise,
push the ventilation lever to the left and the closed position ( ).
Result
: The air simply circulates inside the room.
2 If necessary, press the (On/Off) button.
Result
: ◆ The operating mode indicator (COOL, FAN or HEAT) on the
unit
comes on.
◆ The air conditioner starts up in the mode selected
when
the unit was last used.
◆ The unit beeps twice.
3 If the FAN indicator is not lit up on the unit:
◆ Press the button on the remote control
or
◆ Press the MODE button on the unit one or more times until the FAN
indicator
lights up
Result
: ◆ The unit beeps each time you press MODE.
◆ The air conditioner starts up in Fan mode.
➢
◆ You can change modes at any time.
◆ When the air conditioner is in Fan mode, the
temperature
is not displayed; in this case, you do not
need
to set the temperature.
4 To set the fan speed to...
Then..
.
Result
: Each time you press a button, the unit beeps.
5 To control the direction of the air flow, refer to page 11.
High ◆ Press the button on the remote control.
or
◆ Press the on the unit until the
indica
tor lights up
Med ◆ Press the button on the remote control.
or
◆ Press the on the unit until the
indica
tor lights up
Low
◆ Press the button on the remote control.
or
◆ Press the on the unit until the
indica
tor lights up
Remote Control
Cont
rol Panel