Specifications

26 • The National Locksmith

by Michael

Hyde

UTOMOTIVE

ECURITY

Test Article #131

LS400 Service

Procedures

Part 2

Door Lock

The door lock and handle are part of one assembly

and can only be removed from the inside after

removing the door panel.

Continued on page 28

Next, remove the trim piece on the inside release

lever. Use a small screw driver to gently pry the

trim out from the top and bottom pin retainer.

To remove the panel remove the four screws on the

very bottom of the panel, the two screws under the

arm rest, the screw located near the latch assembly

and the screw located in the heater vent tunnel.

Continued from February 1996

Click on border to view new company or issue