User manual

16_ operating
operating your air conditioner
SELECTING OPERATION MODE
FAN
Fan mode can be selected to ventilate your room. Fan mode will be helpful to refresh the stale air
in your room.
1. Turn on the air conditioner.
 Press the Power
button on the remote control.

2. Set the operating mode.
 Press the FanMode button on the remote control.

indicator appears on the display.
3. Set the fan speed.
 Press the Fan

or  button on the remote
control to set the desired fan speed.
 One of the following icons will appear on the display.

Low fan speed is activated.

Medium fan speed is activated.

High fan speed is activated.
4. Open/block the vents.
 Slide the lever towards
icon to ventilate the room with
fresh air and
icon to block.
• When you are using the remote control, make sure corresponding indicator appears on
the display.
• Air flow can also be adjusted manually. (See page 17 for instructions.)
Power
P
o
w
e
r
wP ero
H3 project F_DB98-33004A-E_10.12.06.indd 16 2011-2-9 14:14:07