User manual

14_ operating
operating your air conditioner
SELECTING OPERATION MODE
Cool
In Cool mode, the air conditioner will cool your room. You can adjust the temperature and the fan
speed to feel cooler in hot season.
1. Turn on the air conditioner.
 Press the Power
button on the remote control.
2. Set the operating mode.
 Press the Cool button on the remote control.

indicator appears on the display.
3. Set the temperature.
 Press the Temp  or —button on the remote
control to increase or decrease the desired
temperature.
 You can set the desired temperature between the
range of 18˚C~ 30˚C.
You can increase/decrease the temperature by 1˚C.
4. Set the fan speed.
 Press the Fan

or  button on the remote control
to set the desired fan speed.
 If room temperature reaches desired value, the air
conditioner will shut off cooling for a while and just
the fan runs.
 One of the following icons will appear on the display.

Low fan speed is activated.

Medium fan speed is activated.

High fan speed is activated.
• When you are using the remote control, make sure corresponding indicator appears on
the display.
• If current outside temperatures are much higher than the selected indoor temperature,
it may take time to bring the inner temperature to the desired coolness.
• Air flow can also be adjusted manually. (See page 17 for instructions.)
• Avoid drastically turning down the temperature. Otherwise energy would be wasted and
the room doesn't be cooled faster.
H3 project F_DB98-33004A-E_10.12.06.indd 14 2011-2-9 14:13:53