User manual

setting up _13
Timer
Sets the timer on/off.
(See pages 18~19 for instructions.)
GoodSleep
Sets the Good Sleep mode on/off.
(See page 20 for instructions.)
Mode
Sets the Cool/Fan/Dry/Smart Saver
mode.(Has no heat funtion)
(See pages 14~16,21 for instructions.)
Swing
Activates/deactivates inner air flow blade
movements. (See page 17 for instructions.)
Temp
Increases/decreases the
temperature.
Fan
Adjusts the fan speed.
Power 
Turns on/off the air conditioner.
Installing the batteries
1. Slidethecover,on
therearoftheremote
control,downtoopen.
2. InstalltwoAAA
batteries.
 Check and match the “+”
and “-” signs accordingly.
Make sure you have
installed the batteries in
correct position.
3. Closethecoverby
slidingitbacktoits
originalposition.
 You should hear click
sound when the cover is
locked properly.
Heater
(Has no heater funtion).
H3 project F_DB98-33004A-E_10.12.06.indd 13 2011-2-9 14:13:43