User manual

operating _21
ENGLISH
Smart Saving mode
This function will set the temperature range limit to help you save energy while the air conditioner
is operating in Cool mode.
1. Turn on the air conditioner.
 Press the Power
button on the remote control.
2. Set the Smart Saving mode on.
 Press the smartsaver button on the remote control
while the air conditioner is operating in Cool mode.
 You will see
on the display.

icon will appear on the display.
•Smart Saver Mode can only be selected in Cool mode. When selecting Smart Saver,You
can not set the desired temperature below 24˚C.
•The fan will run always, while the compressor cycle on and off. When the compressor
off,the fan will run in low RPM,otherwise the fan will run in previously selecting mode.
To deactivate Smart Saving mode
1. Press the Smart Saver button on the remote control;
Smart Saver mode will be cancelled and the unit
will return to the mode you previously selecting(Cool
mode).
• Air flow can also be adjusted manually. Fan speed can be adjusted when using this
mode(See page 17 for instructions.)
I&H3 project P��_33009A-E_1.17.11.indd 21 2011-1-26 9:55:40