OWNER'S INSTRUCTIONS AW069CB AW089CB AWI09CB AWI29CB AWI49CB AWI89CB AW06ECB7 AW08ECB7 AWIOECB7 AWI2ECB7 AWISECB7 AWISECB7 AW25ECB7 Window-type Room Air Conditioner (Cooling) _(_ DB81-00656A(3)
Safety Precautions The following safety precautions WARNING DURING OPERATION must be taken when using your air conditioner. Risk of electric shock. • Can cause injury or death. • Disconnect all remote electric power supplies before servicing, installing or cleaning. • This must be done by the manufacturer or its service agent or a similar qualified person in order to avoid a hazard. Users of this product are cautioned not to attempt repair of this product at their own discretion. Instead.
Contents PREPARING YOUR AIR CONDITIONER • • • Safety Precautions ........................................................................................ Description of Each Component .................................................................... Remote Control - Buttons .............................................................................. • Getting Started • Inserting the Remote Control Batteries .......................................................... 2 4 5 ........................
Description of Each Component _ The design and shape are subject to change. Air inlet (Outside} Inner air flow - Air outlet blades (right/left orientation) Ventilation lever Front Grille Air inlet (Outside) Air filter (Inside) Power plug may differ, depending on the local power supply). (The type of power plug Temperature/Timer settings Mode selection button _Cool. Fan.
Remote Control - Buttons Timer setting button Temp.
Getting Started You have just purchased a Samsung window-type by following your installation manual. Room Air Conditioner which should be installed Your Owner's Instructions contain valuable information on using your air conditioner. Please take the time to read them as they will help you take full advantage of the unit's features. The booklet is organized The following as follows.
Inserting the Remote Control Batteries You must insert or replace the remote control • You purchase • The remote • Use two AAA, LR03 1.5V batteries. • Do not use old batteries • Batteries batteries when : the air conditioner control does not work correctly or different kinds of batteries may be completely discharged together. after 12 months, even if they have not been used.
Cooling Your Room You must select the Cool mode if you wish to lower in your room. You can also set the Fan speed. RemoteControl ControlPanel Press the (,D (On/Off) button. Result: 4, The air conditioner the temperature starts up in the Cool mode. 4, The unit beeps twice.
Airing Your Room If you want to provide the Fan mode. air circulation without cooling, you can use Remote Control 1 If necessary, press the _) (On/Off) button. Result: • The air conditioner • The unit beeps twice. Control Panel Power starts up in the Cool mode. % If the fan speed(F1, F2 or F3) is not displayed on the control panel: • Press the _ or • Press the _ Mode button on the remote control button on the unit one or more times until the fan speed (F1, F2 or F3) is displayed.
Removing Excess Humidity = ff the atmosphere in your room is very humid or damp. you can remove excess humidity without lowering the room temperature too much. Remote Control Control Panel 1 If necessary, press the _ Result: • The air conditioner • The unit beeps. _ql" button. starts up in the Cool mode.
Adjusting the Air Flow Direction Horizontally Depending on the position of the unit in your room. you can adjust the orientation of the inner air flow blades on the unit. Adjust the inner air flow blades to the desired position by sliding them side to side. / Adjusting the Air Flow Direction Vertically The outer air flow blades can be adjusted flow direction. to control the vertical air RECOMMENDATION When... Adjust the blades to face... Cooling Upwards.
Setting the On Timer The On 77mer enables you to switch on the air conditioner automatically after a given time, You can select the On timer only when the air conditioner is off, RemoteControl ControlPanel 1 Check that the air conditioner has been switched off; if necessary, press the (D (On/Off) button. Set the desired amount of time in hours before the unit will come on by pressing the @ button on the remote control or _ button on the unit one or more times.
Setting the Off Timer The Off 7Tmer enables you to switch off the air conditioner automatically after a given time. You can select the Off timer only when the air conditioner is on. RemoteControl Check that the air conditioner has been switched on; if necessary, press the (_) (On/Off) button. ControlPanel Set the desired amount of time before the unit will turn off by pressing the (_ button on the remote control or _ button on the unit one or more times until the desired time is displayed.
Selecting Sleep Mode The Sleep mode can be used when you are cooling your room to switch the air conditioner off automatically after 8 hours. > RemoteControl The Sleep function can be set whether the air conditioner is switched on or off, and this function can be selected for any mode. ControlPanel Press the _ or press the _ Result: button on the remote control button on the unit. • Each time you press a button, the unit beeps. • The _# indicator and "El "wilt be displayed.
Selecting Energy Saving Mode If you wish to save energy when select the energy saving mode. 1 using your air conditioner, To select the energy saving mode, press the _ control or _ button on the remote Remote Control Control Panel button on the unit one or more times until the Energy Saver indicator lights up. Result: • • The fan and compressor cycle on and off together. The fan will continue to run for a short time after the compressor IE.Saverl cycles off.
Temperature The following table indicates and Humidity the air conditioner's Ranges temperature and humidity Mode Indoor Temperature Outdoor Cooling 70°F to 90°F approx. 70°F to 110°F approx. If the air conditioner is used at... Temperature range. Indoor Humidity 80% or less Then... Higher temperatures The automatic protection conditioner will stop. feature Lower tern peratures A water leakage or some other malfunction heat exchanger freezes.
Cleaning Your Air Conditioner Be sure to clean the air filter periodically to keep the air conditioner operating at optimum level. _=_ When cleaning the air conditioner, turn it off and pull out the power plug. 1 Open the front grille by pulling the tabs on both sides of the front grille. Then lift it up slightly to open the front grille completely. 2 Grab the tabs on the air filter and pull it up and out. 3 Remove all dust on the air filter with a vacuum cleaner or brush.
Solving Common Before contacting a Samsung Problems authorized They may save you the time and expense @ service center, perform of an unnecessary the following simple checks. call. Problem Explanation / Solution The air conditioner does not operate at all t Check that the circuit breaker used for the air conditioner has not been t triggered. Check that the power cable is plugged into a wall socket and the socket is t switched on, if necessary.
Technical Design Specifications and specifications Model AW069CB AW089CB AW109CB AW129CB AW149CB AW06ECB7 AW08ECB7 AW10ECB7 AW12ECB7 AW15ECB7 are subject to change without notice.
INSTALLATION MANUAL Window-Type room air conditioner
÷ This brief procedure guide was prepared to supplement the user manual in helping to correctly install your room air conditioner.
!TTING STARTED I Preparation for Installation _1,Always have an assistant to help you, Never attempt to install any air conditioner alone. _1,You risk the possibility of hurting yourself or injuring others by attempting to install it alone, I Checkpoints Prior to Installation 1 Carefully remove the unit from the packing case, lay it on the floor and check that all accessories (as indicated) are enclosed. 2 Check the cabinet and front grille of the unit for any defects such as scratches.
Window Type Requirements • A standard double-hung window with an actual opening width of "X." iii_ii i ! The installation will need to be modified for windows other than the standard double hung type. • Clear a vertical opening of "Y" minimum, from bottom of sash to sill. "X" • Install the air conditioner in a window where there will be enough clearance around the cabinet to allow ample circulation of air through the unit. All supporting parts should be secured to firm wood, masonry, or metal.
i¸ i i i i AW069CB/AW06ECB7 Installation l'he illustrations shown in this section may not exactly match your air conditioner. The following accessories may be not supplied depending on the model. Type A(Qty-6) TypeB(Qty-10) Window filler panel Type C(Qty-2) Top Support Channel Top_*_-- Adhesive seal strip Window gasket channel seal strip 1 Remove the backingfrom the top support channel seal strip and attach it to the bottomof the top supportchannel.
Type AW069CB/AW06ECB7 Installation(cont.) 5 Attach the seal strip to the window. 5-1 Cut the adhesive-backed foam seal strip gasket to the window width. 5-2 Remove the backing from the adhesive the underside of the bottom window. seal strip and attach the strip to 6 6 Install the unit in the window. 6-1 Place the air conditioner support channel cabinet positioned into the window with the top just in front of the bottom sash.
pe AW069CB/AW06ECB7 Installation(cont.) 8 Install the window gasket. Cut the foam window gasket to the window width and stuff it between the window and the glass to prevent air and insects from getting into the room. 9 Check for air leaks and seal. 10 Plug in the power cord connected to the air conditioner. Turn the air conditioner on and operate it in Coot mode. Check to make sure there are no unusual vibrations. After several minutes, the unit will blow out cold air.
Type AW069CB/AW06ECB7 _moval Installation(cont.) of the Front Grille ff you need to remove the front grille for replacement, follow the steps below. 1 Open the front grille by pulling the tabs on both sides of the grille. Then lift it up slightly to open the front grille completely. 2 Remove the screw that holds the grille in place. Remove the shipping tape before pulling out the air filter, if necessary. 3 Disassemble the front grille.
The following accessories Type A(Qty-8 ) may be not supplied Type B(Qty-18 or 19) depending on the model. Type C(Qty-2) Type D(Qty-2) Top Support Window sash seal Window gasket Window Filler Panel Security bracket Channel _ Bottom gasket channel seal strip 1 Open the front grille depending on the model. If necessary, refer to your owner's instructions. 2 Remove the screw located at the lower section of the front grille. It is secured in the _"_ section depending on the model.
Type AW089CB/AW109CB/AW129CB/AW08ECB7/AW10ECB7/AW12ECB7 Installation(cont.) 5 Carefully remove the chassis from the cabinet by pulling it forward. (A little careful leverage with a screwdriver may help to slide the unit out.) Now would be an good time to inspect the fan for damage caused by shipment. Rotate the fan blade with your hands. • It should revolve freely without any scratching or unusual noise. If such a noise exists, pack the unit up and return it to your dealer.
e AW089CB/AW109CB/AW129CB/AW08ECB7/AW10ECB7/AW12ECB7 _stallation Now position the cabinet centrally into the window. Make sure you have about a five degree downward slant to the outside for proper drainage of condensation. 9-1 _,;_- 9 Attach the support brackets to the cabinet in order to adjust the pitch. 9-1 Select the Type D support bracket position that will place the bracket near the outermost point on the window silt. In most cabinets this will be the first set of holes.
Type AW089CB/AW109CB/AW129CB/AW08ECB7/AW10ECB7/AW12ECB7 Installation(cont.) ill 11 Install the cabinet in the window. 11-1 Place the cabinet into the window with the top support channel positioned just in front of the bottom sash. 11-2 Pull the window down until it rests on the cabinet, just behind the top support channel 11-3 Locate three screw holes along the cabinet bottom front edge. I Center the cabinet, side to side, in the window and mount it to the window stool using three Type A screws.
CB/AW109CB/AW129CB/AW08ECB7/AW10ECB7/AW12ECB7 Installation(cont.) 14 14 Slide the chassis into the cabinet. 14-1 Carefully slide the air conditioner back into the cabinet. 14-2 Place the bottom gasket between the bottom of the chassis and the inside bottom of the cabinet. Fold up the ends on both sides of the bottom gasket and push them in. 14-3 Reinstall the chassis-to-cabinet retaining screws removed on page 11. Bottom gasket 15 Window gasket 15 Install the window gasket.
Type AW149CB/AW189CB/AW15ECB7/AW18ECBT/AW25ECB7 Installation The illustrations shown in this section may not exactly match your air conditioner. The following accessories Type A(Qty-10) may be not supplied depending Type B(Qty-21 ) on the model. Type C(Qty-2) Type D(Qty-2) Window sash seal ,-,? TopSupport Channel _ o o Window gasket Window Filler Panel Security bracket oi:!oi: !o::!oi: i ,_ Bottomgasket Top channel seal strip K,,:; o:° o or,o.,, o0 1 Open the front grille.
490B/AW189C B/AWl 5EC B7/AWl 8EC B7/AW25 EC B7 Installation(cont.) 5 Carefully remove the chassis from the cabinet by pulling it forward towards you. (A little careful leverage with a screwdriver may help to slide the unit out.) >- Now would be a good time to inspect the fan for damage caused by shipment.Rotate the fan blade with your hands. • It should revolve freely without any scratching or unusual noise. If such a noise exists, pack the unit up and return it to your dealer.
Type AW149CB/AW189CB/AW15ECB7/AW18ECB7/AW25ECB7 Installation(cont.) Now position the cabinet centrally into the window. Make sure you have about a five downward slant towards the outside backwards for proper drainage of condensation. 9 Attach the support brackets to the cabinet for adjusting the pitch. 9-t Select the Type D support 9-1 bracket position that will place the bracket near the outermost point on the window sill. In most cabinets this will be the first set of holes.
W149CB/AW189CB/AW15ECB7/AW18ECB7/AW25ECB7 Installation(cont.) 11 11 Install the cabinet in the window. 11-1 Place the cabinet into the window with the top support channel positioned just in front of the bottom sash. 11-2 Pull the window down until it rests on the cabinet, just behind the top -Top Suooo_ Channe support channel. 11-3 Locate five screw holes along the cabinet bottom front edge. Center the cabinet, side to side, in the window and mount it to the window stool using five Type A screws.
Type Installation(cont.) 14 14 Slide the chassis into the cabinet. iiiL 14-1 Carefully slide the air conditioner back into the cabinet. 14-2 Place the bottom gasket between the bottom of the chassis and the inside bottom of the cabinet. Fold up the ends on both sides of the bottom gasket and push them in. I i i I _-J iiiiI _ 14-3 Reinstall 2 front screws on the side of unit among the removed screws in II II iI page 17. Bottom gasket _____.,__ 15 Install the window gasket.
SAMSUNG ROOM AIR CONDITIONER This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS AMERICA, INC.
