User manual

E-6
Cooling Your Room
You must select the Cool mode if you wish to adjust the:

Cooling temperature

Fan speed when Cooling
1
To switch the unit on, simply press the Power Control selector to the" I "
position.
Result:
The air conditioner starts operating.
2
Turn the Thermostat dial and set it to " 1 ~ 10 ".
Possible temperatures: Can be set between 18 °C and 29°C .
Result:

The air conditioner starts cooling if the room temperature is
higher than the selected temperature.
3 Press the " Fan Mode " selector to the High or Low position.
Result: The Fan speed is adjusted.
4 To control the direction of the air flow,refer to page 7.
Ventilating Your Room
1
To switch the unit on, simply press the Power Control seleetion to the
"I" position
Result:
The air conditioner starts operating.
2
Turn the Thermostat dial and set it to "Fan only" position.
Result:

The air conditioner starts up in fan mode.
3 Press the " Fan Mode " selector to the High or Low position
Result: The Fan speed is adjusted.
4 To control the direction of the air flow,refer to page 7.