User manual

E-11
Installation
Checkpoints prior to installation
1 Check the cabinet and front grille of the unit for any harmful defects
such as scratche
s
.
2 Be sure to check the power supply.
- Refer to the specifications on the label attached to the uni
t
.
Before installation, be sure to check the installation area or the air
conditioner,
and drain hose.
Installation Conditions
1 As the unit is heavy, the wall or window of the installation area should
have sufficient strength and durability for operation of the air conditione
r
,
and for prevention of any vibration or nois
e
.
If it is weak, reinforcement work should be performed separatel
y
.
2 It is advisable to install the air conditioner in the north or west side to
prevent the effect of direct sunligh
t
.
When installing it in the south or east side due to unavoidab
l
e
circumstances, it is advisable to install the sunshade to prevent t
h
e
direct sunligh
t
.
In this case, take care not to cause any hindrance to the flow of outside ai
r
.
3 When installing the air conditioner, be sure to obtain sufficient space on
the rear side of the unit for smooth flow of ai
r
.
When operating the air conditioner in closed areas such as inner buildi
n
g
with cooling operation, and result in trouble with the uni
t
.
See the illustration belo
w
.
500mm 500mm
115mm
min.
300mm
50
0mm
110mm min.
Approx.3˚
Awning
75
0mm
38mm
45
45
Fence, wall
or
other
obstacle


If the wall is greater than 110mm thick,
cut
the wall back on a 45° angle if possible.
Outdoor
side
Indoor
side
100mm or more
DB98-16465A.indd 11 2006-8-28 13:45:53