User Manual

E-18
Adjusting the Air Flow Direction Vertically
Depending on the position of the indoor unit on the wall of your room,
you can adjust the position of the outer air flow blade on the bottom of the
unit, thus increasing the efficiency of the air conditioner.
1
Press the button one or more times as required.
Result: The outer blade is adjusted vertically.
RECOMMENDATION
When... Adjust the blade to face...
Cooling Upwards.
Heating Downwards.
2
If you want the blade to move up and down automatically when the air
conditioner is operating, press the
button.
Result: The blade moves up and down, around the base position set.
3
To stop the blade moving up and down, press the button again.
Note If you switch the air conditioner... Then the blade is...
Off Closed completely.
On again Set to the initial position
powered.
AVXWP@@_IB_E_24114.indd 18 2006-01-06 ¿ÀÈÄ 6:29:05